···
Log in / Register

How to Deal with Foggy Windshield in Summer?

6Answers
AbelDella
07/24/2025, 01:28:30 PM

In summer, if the windshield fogs up, you can turn on the front window defogging mode, then adjust the fan speed to the maximum, turn on the AC switch, and set the temperature to the lowest. The fog on the glass will disappear shortly. Alternatively, wiping the inside of the windshield with a cloth dipped in dish soap or a special anti-fog agent can also effectively prevent the glass from fogging up. Fogging on the outside of the windshield: This situation often occurs before a summer rainstorm when the air is hot and humid. Even if the temperature is not very high, it can still be very uncomfortable due to the high humidity, which prevents sweat from evaporating and absorbing heat, leading to poor human comfort. Driving with the air conditioning on in such weather can easily cause the windshield to fog up. This happens because the cool air from the car's AC lowers the temperature of the windshield, causing the water vapor in the outside air to condense upon contact with the cold windshield.

Was this review help?
109
Share
DeAllison
08/10/2025, 04:10:54 AM

Windshield fogging in summer is a common issue caused by temperature differences. Having driven for over a decade, when encountering this situation, I first turn on the air conditioning to cool, adjust the airflow to blow towards the windshield, and use the external circulation mode to allow air flow for dehumidification. Opening the windows slightly can speed up ventilation, and the fog can clear in just a few minutes. Prevention is crucial. Every time I wash my car, I use glass cleaner to wipe the windows, keeping the surface smooth and less prone to condensation. I also keep an anti-fog spray in the car for emergencies. Safety is important too—don’t drive stubbornly in heavy fog; find a safe place to stop and handle it. Regularly check the humidity control inside the car, as excessive moisture can easily cause recurrence. These small habits have saved me a lot of trouble.

Was this review help?
1
Share
Expand All
LukeFitz
09/25/2025, 10:21:34 PM

As a parent, I must ensure the safety of my family while driving, especially when the windshield fogs up in summer. I immediately turn on the air conditioning to cool, direct the airflow toward the front windshield, activate the external circulation for faster dehumidification, and slightly open the rear windows for ventilation. If I want to save fuel, I use the natural air method: rolling down all windows slightly to let the warm air blow away the fog. Long-term prevention is more convenient, such as leaving a small gap in the windows when parking to let out moisture or placing a dehumidifier in the garage to reduce humidity inside the car. I also find that cleaning the glass is crucial; wiping it with water and a little vinegar can prevent fogging. Before going out with my child, I always double-check to avoid distractions while driving.

Was this review help?
9
Share
Expand All
VanHenry
11/08/2025, 11:24:52 PM

The principle of fogging is the large temperature difference between the inside and outside of the glass, coupled with high humidity causing water vapor to condense. To handle it, I directly use the air conditioning cooling system: press the A/C button, increase the fan speed, set the airflow direction to the windshield, and let the cold air quickly dehumidify. If the car has an automatic defogging function, it's even more convenient—just press a button. Exploring the principle, controlling humidity and temperature difference is key. I've tried anti-fog coating products, which form a hydrophobic layer to prevent condensation. Tech gadgets like in-car humidity detectors are also quite useful, as they can alert you to adjust settings.

Was this review help?
19
Share
Expand All
Cecilia
12/30/2025, 01:09:53 AM

I prioritize eco-friendly driving. In summer when windows fog up, I first open them for natural ventilation to dehumidify, only briefly turning on the AC when absolutely necessary to save energy. For prevention, I use natural methods: adding a few drops of lemon juice when cleaning windows, or applying a homemade anti-fog spray (glycerin diluted with water), which effectively reduces fog formation. I park in shaded areas to minimize temperature differences and prevent moisture buildup. I've also developed the habit of pausing for a few minutes before driving to check ambient humidity—these small actions are both energy-saving and practical.

Was this review help?
5
Share
Expand All
SanAdriel
03/27/2026, 03:20:55 AM

When commuting in a hurry, efficiently dealing with windshield fogging in summer is crucial. As soon as I get in the car, I turn on the air conditioning with high fan speed to blow the front windshield, and the fog starts to dissipate within seconds. Modern cars come with a quick defogging button that activates the system instantly. For regular maintenance, I use an anti-fog cloth for quick wiping and make it a habit to open the windows when parked to prevent fog buildup. To save time, I also set the fan to turn on simultaneously with the air conditioning to accelerate airflow, and the entire process takes less than a minute to complete.

Was this review help?
12
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Jaguar XEL?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or signal interruption occurs, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockages can all result in poor combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to activate. A dirty or uncleaned air filter can restrict proper airflow. Exhaust system faults: Exhaust problems can trigger the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage this component. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or doesn't properly communicate with the engine control unit, it may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine operates normally - observe for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the light is red. If the engine starts normally, turn off the vehicle for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The system will perform a self-check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to retrieve trouble codes and perform targeted repairs.
116
Share

Is There Any Impact from Switching from 95 Octane to 92 Octane Fuel Long-Term?

Switching from 95 octane to 92 octane fuel long-term does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles designed for lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical experience being poorer performance. For vehicles designed for higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane rating is significantly lower, the reduced ignition point causes premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane fuel, while those with a compression ratio between 10.0-11.5 should use 95 octane fuel. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
108
Share

What are the hidden functions of the 2011 Teana key?

The hidden functions of the 2011 Teana key include closing the windows after turning off the engine, finding the car in a parking lot, automatically opening the trunk, and remotely opening the windows. Relevant information about the Teana is as follows: 1. Exterior Design: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlights, and LED daytime running lights. Additionally, the model also launched the Phantom Edition package, which includes blackened rear emblems, chrome front grille trim, wheels, rear spoiler, Midnight personalized rear emblem, and other unique exterior accessories. 2. Interior Design: The 2021 Teana upgrade features piano-black door trim panels, wood-grain center console and gear lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Moreover, the Phantom Edition package also includes luxury LED welcome pedals and exclusive floor mats. 3. Powertrain: The 2021 Teana offers a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission equivalent to an 8AT gear range. The 2.0T model is equipped with the VC-TURBO variable compression ratio turbocharged engine, which allows the engine compression ratio to intelligently and continuously switch between 8:1 (high performance) and 14:1 (high efficiency). The 2021 Teana can accelerate from 0 to 100 km/h in just 6.42 seconds, with a minimum fuel consumption of 6.6L per 100 km.
119
Share

Should the car be started when charging a phone inside?

Starting the car is necessary when charging a phone inside. Here are the precautions for starting a car: 1. Check the surroundings of the vehicle: Walk around the car to inspect its exterior and the environment, ensuring there are no obstacles in front or behind the car. Check the ground where the car is parked for any suspicious oil stains or water stains, verify if the front and rear light assemblies are damaged, and ensure the tire pressure is adequate. 2. Inspect the internal condition of the car: Check if the engine oil and coolant levels are sufficient, and if the front and rear lights, signal lights, and dashboard are functioning properly. The main focus is to examine the technical condition inside the car. Lift the engine hood, pull out the dipstick to check if the oil level is normal, and unscrew the radiator cap to verify if the water level is normal.
112
Share

What is the method to reset the maintenance light on Changan Suzuki?

Turn on the ignition switch, briefly press the right-side information display selection handle until the information display screen goes black and then stops. Press and hold the left-side mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button. The display area will show the oil lock. Release the button and press it five times consecutively within 2 seconds, completing the action within 3 seconds. The oil lock will turn off, indicating the operation is complete.
115
Share

Why does the car key not respond when locking the car?

If the car key does not respond when locking the car, it may be due to a malfunction of the remote lock or aging of the remote transmitter antenna in the vehicle, which prevents the remote key from working properly. Another possible cause is strong magnetic signal interference around the car. Here are some precautions for car keys: 1. Do not place it near electronic devices: Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. Frequently placing the smart car key together with a mobile phone can lead to malfunction, as the chip inside the smart key may sometimes be affected by the phone's frequency, temporarily disabling the remote function. Additionally, if the smart key receives high-intensity radio waves, it may excessively drain the battery. Therefore, avoid placing the smart key near electronic devices such as TVs or personal computers. 2. Avoid rough handling: Smart keys are most vulnerable to being dropped from a height. While the outer shell of most smart keys is sturdy, the internal circuitry is less resistant to impact and can easily be damaged by severe collisions. Furthermore, if water enters the smart car key, it can burn out the internal circuitry, also causing remote failure. If the smart car key gets wet, do not shake it vigorously, as this can cause water to spread to other critical circuits. Also, avoid using the remote to unlock the car immediately, as this may damage the circuit board. 3. Use the correct battery: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency and distance of key usage. Replacing the battery of a smart car key requires caution, as any mistake can damage the circuit board inside the key. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to use an original battery. During installation, ensure the correct orientation of the battery's positive and negative terminals to avoid incorrect placement. Additionally, be careful with the sealing ring at the bottom of the key to prevent damage during replacement, which could otherwise burn out the circuit board.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.