···
Log in / Register

How to Deal with Foggy Windows at Home?

3 Answers
DelCaroline
07/29/25 7:47pm
On cold winter days, we often close the indoor window panes and turn on the heating or light a fire to provide the warmth we need. However, after a while, when we look out the window, we find it covered in mist, which affects the view and seems like an endless autumn scene. This often happens when you wake up in the morning. Prepare a towel, clean it with water to remove dust; this works better. Use a detergent (or other cleaning agents like soap, etc.), mix the detergent with water in a basin in a certain proportion, then rub the towel in the water, wring it out slightly, and use it to wipe the glass. This not only removes the fog but also effectively prevents it from forming again for some time. Now, enjoy the clean glass.
Was this review help?
11
0
Share
LincolnFitz
08/14/25 3:20pm
I find that when condensation forms on the windows at home, it's usually due to high humidity and temperature differences between indoors and outdoors, especially common in winter or rainy weather. I first use a clean, soft cloth to wipe away the water droplets, or gently wipe with newspaper because it has good absorbency and leaves no streaks. Then, I open the windows for a few minutes to let fresh air circulate and reduce humidity. If the weather is bad, I turn on a fan indoors and direct it towards the windows to disperse the fog. Usually, I pay attention to maintaining a balanced room temperature to avoid excessive heating that could create a larger temperature difference. Additionally, I regularly check the window seals and temporarily patch any cracks with tape to prevent moisture intrusion. In the long run, buying a small dehumidifier is quite effective—placing it near the window helps absorb moisture efficiently, preventing the glass from fogging up again and protecting furniture from the risk of dampness. Finally, here's a handy life hack: applying a diluted solution of white vinegar or dish soap on the glass forms an anti-fog film once dried, which is simple and convenient.
Was this review help?
11
2
Share
Expand All
CooperDella
10/15/25 7:25am
My car windows are fogging up, and I believe this issue needs to be handled properly to avoid wasting energy. The root cause lies in moisture accumulation. My priority is to open the windows to allow air circulation—even just a few minutes can make a noticeable difference, and it also reduces the electricity consumption from using the air conditioner. Using a fan to assist with airflow is quite efficient as well, preventing the fog from lingering too long and damaging the glass surface. With environmental considerations in mind, I prefer making my own dehumidifying tools: small bags filled with silica gel or quicklime placed on the windowsill can naturally absorb moisture without causing pollution, and they can be reused after drying in the sun. It’s important to develop good habits, such as turning on the exhaust fan while cooking or showering to reduce indoor humidity, and checking for drafts around doors and windows, adding weatherstripping if necessary. If the fogging is severe enough to impair visibility and pose a safety hazard at home, I recommend cleaning it promptly to prevent tripping or falls. In short, these simple actions can help maintain a comfortable environment.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Can the new owner use the car if the ownership is transferred but the insurance is not?

Car ownership is transferred but the insurance is not, the new owner can use it, but if an accident occurs, the insurance company has every reason to refuse compensation. Therefore, when buying a used car, you must pay attention to the timely transfer of insurance. The following is a related introduction to car insurance: Overview: Car insurance refers to a commercial insurance that compensates for personal injury or property loss caused by natural disasters or accidents to motor vehicles. Classification of car insurance: Commercial insurance is an indefinite value insurance, divided into basic insurance and additional insurance, among which additional insurance cannot be independently insured. Basic insurance includes third-party liability insurance and vehicle loss insurance (car damage insurance); additional insurance includes full vehicle theft insurance (theft insurance), on-board liability insurance, no-fault liability insurance, falling cargo liability insurance, glass breakage insurance, vehicle suspension loss insurance, spontaneous combustion loss insurance, new equipment loss insurance, and no-deductible special insurance.
6
2
Share

What is the fuel tank capacity of the Toyota Land Cruiser V8?

The fuel tank capacity of the Toyota Land Cruiser V8 is 138 liters, as officially announced. The Toyota Land Cruiser V8 requires 95-octane fuel, with a fuel consumption of 13.6-14.7L per 100 kilometers. A full tank can cover a distance of 938-1014km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel filled may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
19
5
Share

What Do the Red and Green Lights on an Automotive Test Pen Indicate?

Automotive test pen red and green lights represent respectively: the red light indicates an increase in voltage, while the green light indicates a decrease in voltage. Below is relevant information about automotive test pens: Definition: An automotive test pen, also known as an automotive voltage tester or test light, is a commonly used circuit testing tool for automotive electricians during activities such as installing additional electrical components, modifying circuits, and performing repairs. Function: It is used to detect whether there is voltage at the test point in an automotive circuit. For precise measurements, a multimeter is still required. Structure: An automotive test pen consists of a barrel; at the front end of the barrel, there is a metal tip called the probe, which is used to contact the test point; inside the barrel, there is an indicator light (a small bulb or LED); at the rear end of the barrel, there is a wire with a clip attached. Some automotive test pens also include a fuse.
8
2
Share

What does an exclamation mark on an electric vehicle mean?

This indicates a power supply failure in the electric vehicle. This warning light usually illuminates along with other fault lights, indicating a power supply issue. If this light comes on alone, it means there is a communication failure in the system bus. Causes of motor failure: The main reasons for motor failure are either a damaged motor Hall element or a faulty motor bearing. A damaged motor Hall element typically manifests as the electric vehicle not moving, having weak acceleration, shaking, making loud noises, or requiring a push to start. A faulty motor bearing usually causes loud abnormal noises from the motor, and in severe cases, it can lock up the motor, cutting off power to the entire vehicle. Methods to handle brake power-off faults: Brake power-off faults mainly manifest as a faulty brake power-off switch, the vehicle not moving when the brake is not released, or an open circuit in the brake power-off line. If the power-off fault is caused by a faulty brake power-off switch, it can be resolved by polishing the contacts and adjusting the spring plate. If this doesn't work, replacement is necessary. If the power-off fault is caused by the vehicle not moving when the brake is not released, the brake pads or the entire brake assembly should be replaced. If the power-off fault is due to an open circuit in the brake power-off line, replacing the line is the solution.
7
0
Share

What is the oil specification for Toyota Camry 2.4?

Toyota Camry 2.4 normally requires 5W-30 viscosity oil for maintenance. If the mileage is high, it is recommended to use 5W-40 or 0W-40 viscosity oil for better performance. For subsequent oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so it's important to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the engine. The latter number represents the kinematic viscosity of the oil at 100°C. A higher number indicates better viscosity retention at high temperatures, meaning better lubrication performance under high-temperature conditions. The method for changing the oil in a Toyota Camry 2.4 is as follows: Wait for the engine temperature to cool down, allowing the oil to drain back into the oil pan. Loosen the drain plug with a wrench and place an oil pan underneath to collect the old oil until it stops draining. Start the engine for about 30 seconds to allow the oil in the main oil passages to flow out. Remove the oil filter using a special wrench. Apply some oil to the seal of the new oil filter and screw it on clockwise by hand. Add new oil through the oil filler cap on the engine valve cover. Typically, fill about three-quarters of a standard oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to check that the oil level is within the standard range.
9
5
Share

Where is the Ford Mondeo engine produced?

Ford Mondeo engines are domestically produced, manufactured at Changan Ford's Chongqing plant. Imported Ford engines are produced in the UK, with some models also manufactured in the US. The Ford Mondeo engine is a 1.5L L3 with natural aspiration intake, delivering a maximum horsepower of 122ps and a maximum torque of 152nm. For daily maintenance of the Ford Mondeo engine, the following methods can be employed: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly replace the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To prevent faults, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve, carrying contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.