How to Deal with Foggy Car Windows in Winter?

2 Answers
Roger
07/24/25 10:39pm
Window fogging in winter can be handled by: 1. Opening both windows to allow air convection and eliminate temperature differences; 2. Turning on the air conditioning with cold or hot air; 3. Using defogging agents; 4. Wiping the glass with soapy water; 5. Drying the fog with a towel. The causes of window fogging in winter are: 1. Large temperature difference between inside and outside the car; 2. Window temperature below the dew point; 3. Temperature difference between the two sides of the window. Window maintenance methods include: 1. Using appropriate windshield washer fluid according to the season; 2. Applying automotive window insulation film. Window cleaning methods are: 1. Starting from the top of the vehicle, pour water and wipe off dirt with a sponge; 2. Evenly spray glass cleaner solution using a high-pressure spray bottle; 3. Carefully dry with a soft cloth.
Was this review help?
15
1
Share
LaOlivia
08/10/25 3:06pm
I often encounter the problem of foggy car windows in winter, especially when driving on cold mornings. The reason for the fog is the large temperature difference between the inside and outside of the car, causing moisture in the air to condense on the windows. My solution is to start the car first, turn on the defogging button—usually a mode in the air conditioning system—which automatically activates the heater and dehumidification function to quickly clear the fog. If the fog is severe, I use a clean towel to gently wipe the inside of the window or crack open a window slightly to allow air circulation and minimize the temperature difference between inside and outside. Prevention is also important; I regularly clean the interior window glass to reduce dust and grease buildup, as these make it harder for fog to dissipate. Keeping a defogging spray in the car is also useful—spray it on and wipe it dry with a cloth to prevent fogging for a long time. Remember, foggy windows impair visibility, so driving safety comes first.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What is the process for using the high and low beams of Geely?

When using high beams, turn on the headlights and push the lever outward to position 1. When using low beams, pull the lever back to position 2. Push the lever all the way outward, and when the lever is released, the high beams will turn off.
10
1
Share

What is the difference between a sewage suction truck and a fecal suction truck?

Here is an introduction to the differences between sewage suction trucks and fecal suction trucks: The structure is the biggest difference between sewage suction trucks and fecal suction trucks, which also leads to significant differences in their uses. 1. Vacuum degree and suction force: Affected by the structure and shape of the tank, the vacuum degree and suction force of fecal suction trucks are not as strong as those of sewage suction trucks. 2. Capacity: Fecal suction trucks use the pressure difference of the vacuum pump for sewage discharge, which is limited by the position of the sewage outlet. Larger stones cannot be discharged, making them unsuitable for dredging work involving larger objects. 3. Sewage discharge effect: Sewage suction trucks adopt a hydraulic top-opening self-dumping sewage discharge structure, resulting in better sewage discharge efficiency and effect. 4. Domestic usage habits: Influenced by domestic usage habits, sewage suction trucks are more commonly used by users in the north, while fecal suction trucks are more commonly used by users in the south.
19
3
Share

How to Drive on a 2-Lane Highway?

First, you must go to a repair shop or a 4S store to check whether the car is in normal condition. Do not change lanes back and forth. When changing lanes, first observe the situation of the vehicles behind you, and make sure to turn on the turn signal in advance when it is safe to change lanes.
20
4
Share

How to Reset Camry Idle Speed?

First, turn the key to the power supply position while keeping the engine off. After leaving it for 10 seconds, quickly press the accelerator pedal all the way down and hold for 15 seconds, then quickly release the pedal. Turn off the ignition and remove the key, then leave it for 15 seconds. Start the car normally, and the matching is complete.
14
5
Share

How often should a 7-seater vehicle be inspected?

Non-operational small and mini passenger vehicles with 7 to 9 seats that are within 6 years of age are included in the exemption range. For non-operational small and mini passenger vehicles over 6 years but less than 10 years, the inspection frequency is adjusted from once a year to once every two years. Vehicles over 15 years old must be inspected every 6 months. Operational passenger vehicles must be inspected once a year within 5 years. Tractors and other motor vehicles must be inspected once a year. Below are the classifications of driving licenses: 1. A1 license: Can drive large buses and A3, B1, B2, C1, C2, C3, C4, M. 2. A2 license: Can drive tractors and B1, B2, C1, C2, C3, C4, M. 3. A3 license: Can drive city buses and C1, C2, C3, C4. 4. B1 license: Can drive medium-sized buses and C1, C2, C3, C4, M (medium-sized buses refer to those with fewer than 19 seats, such as minibuses and vans). 5. C1 license: Can drive C2, C3, C4.
11
2
Share

What to Do If You Forget the Audi PIN Code?

Dealers can read the immobilizer identification code from the control unit and apply to query the password. If the user manual is lost, you need to contact the local dealer, use a specialized diagnostic computer to detect and then rematch the code to restore normal function.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.