How to Deal with Foggy Car Windows in Summer?

2 Answers
OThomas
07/24/25 3:43pm
Solutions for foggy car windows in summer include: 1. Using air conditioning to defog by turning on the AC and directing cold air towards the front windshield, utilizing the dehumidification function to remove fog; 2. Applying detergent-based anti-fog solutions; 3. Using anti-fog spray—spray it on the fogged windshield and wipe dry with a cloth for immediate clarity; 4. Installing rain visors to redirect airflow, reducing wind resistance and directing air towards the side mirrors to speed up evaporation and clear front windshield fog; 5. Utilizing the external air circulation system for defogging; 6. Activating the rear window heating to remove fog; 7. Slightly opening the window to allow air convection and reduce temperature differences.
Was this review help?
20
3
Share
Ava
08/11/25 8:43am
I dread driving in summer rain with fogged-up windows the most! Last month during a heavy downpour, my windshield suddenly turned completely white. Immediately do three things: turn on the AC for cooling, adjust the air vents to blow on the windshield, and switch to external air circulation. The cold air can quickly remove moisture from the inside of the glass. If the fog isn't too heavy, cracking the windows slightly for ventilation also helps. Avoid using internal circulation—it only increases humidity. Remember not to set the temperature too low; around 23 degrees is most effective for dehumidifying. Shivering from the cold can actually make it harder to see the road. If your car has a heated rearview mirror function, remember to turn it on, and press the rear window defogger button as well. Once you get home, wipe the inside of the glass with a dry cloth to remove any oily film, which will slow down fogging next time.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

How to Stop an Automatic Transmission Car at a Red Light?

There are two methods for stopping an automatic transmission car at a red light: shifting to neutral and applying the handbrake, or staying in D gear while pressing the brake pedal. The neutral and handbrake method is suitable when the light has just turned red or there is a long remaining time, as shifting to neutral cuts off engine power, and the handbrake prevents the vehicle from moving. The D gear and brake method is ideal when the light is about to turn green in a few seconds or during stop-and-go traffic, allowing for quick acceleration without frequent gear changes. Here are some precautions for stopping at a red light: 1. Do not shift to P gear at a red light: If the car behind fails to react in time, shifting to P gear could result in a rear-end collision. 2. Avoid staying in D gear with the brake pressed for too long: In automatic transmission vehicles with a torque converter, staying in D gear while braking causes the engine's power to be absorbed by the torque converter, raising its temperature. For dual-clutch transmissions, the clutch remains in a semi-engaged state, leading to slippage and temperature increase.
12
5
Share

How many days does it usually take to receive the penalty points notification?

After a traffic violation, you will generally receive a violation notification via text message within 3 to 7 days. Here are the details: According to traffic regulations, after a motor vehicle violation, you can usually check online or receive a text message notification within 3 to 7 days, with the latest notification not exceeding 13 working days. Here is some additional information: Violation handling methods: 1. If you are caught on the spot by traffic police and sign the confirmation: The vehicle owner must go to the local traffic police station to handle the violation within 15 days of the violation. If it exceeds 15 days without handling, a late fee of 3% per day will be charged, but the late fee amount will not exceed double the original fine. 2. If it is an electronic surveillance camera capture: The vehicle owner can check the violation record on the traffic website and can go to the traffic police station where the violation occurred within one month before the annual vehicle inspection to handle it, without needing to do so within 15 days.
19
5
Share

What to Do When Coolant is Insufficient?

When the engine is cold, directly open the coolant reservoir and top up the coolant to between the upper and lower level marks. Here is some relevant information about coolant: 1. Characteristics of Coolant: Automotive engine coolant is mainly composed of water, ethylene glycol, and additives, with corrosion inhibitors being the primary additive. The main function of additives is to prevent corrosion, while also providing anti-scale and anti-foam effects. Currently, the base fluid for automotive engine coolant is primarily ethylene glycol, and the differences in coolant formulations lie in the use of different corrosion inhibitor systems. Under the premise of using water and ethylene glycol as the base fluids, the key technology in coolant formulation research is the selection and combination of corrosion inhibitors. Typically, coolants are classified into inorganic salt types and organic acid types based on the composition of corrosion inhibitors, with inorganic salt types further divided into phosphate type, amine type, and silicate type. 2. Product Performance: Engine coolant in the coolant reservoir consists of three parts: water, antifreeze, and additives. Depending on the antifreeze component, it can be classified into alcohol type, glycerol type, ethylene glycol type, and other types of coolants. Alcohol-type coolant uses ethanol (commonly known as alcohol) as the antifreeze, which is inexpensive, has good fluidity, and simple preparation process. However, it has a low boiling point, is prone to evaporation loss, has an easily increased freezing point, and is flammable, and is gradually being phased out.
11
2
Share

What is a Hood?

Generally, the front exterior of a vehicle consists of four main parts. The foremost part is the front bumper. On either side, there are the left fender (or left side panel) and the right fender (also known as the right side panel). The component covering the engine, located above the bumper and the two fenders, is called the engine cover or hood. This is what is commonly referred to as the hood. Below is some extended information about the hood: 1. Classification: Front-mounted hood, mid-mounted hood, rear-mounted hood. 2. Functions: (1) Airflow guidance: The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance force it generates, reducing the impact of airflow on the vehicle. Through guidance, air resistance can be broken down into beneficial forces, increasing the downward force of the front tires on the ground, which helps improve the vehicle's driving stability. (2) Protection of the engine and surrounding pipeline components: By enhancing the strength and structure of the hood, it can effectively prevent adverse effects such as impacts, corrosion, rainwater, and electrical interference, ensuring the normal operation of the vehicle. (3) Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As an important part of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the entire vehicle.
20
4
Share

Can people with myopia learn to drive?

People with myopia can learn to drive. According to the regulations on the application and use of motor vehicle driver's licenses, individuals with myopia are permitted to drive. For applying for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or tram driving licenses, the naked eye or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart. For other driving license categories, the naked eye or corrected visual acuity must reach 4.9 or above. Below are other relevant requirements for obtaining a driver's license: 1. Height: Applicants for large passenger vehicles, tractors, city buses, large trucks, or trolleybuses must be at least 155 cm tall. Applicants for medium-sized passenger vehicles must be at least 150 cm tall. 2. Color vision: No red-green color blindness (color weakness is not equivalent to color blindness, and there are degrees and color differences, so there are no restrictions based on the regulations themselves). 3. Hearing: Able to distinguish the direction of sound sources with each ear 50 cm away from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids can also apply for small car or small automatic transmission vehicle driver's licenses. 4. Age: Applicants for small cars (Category C) and light motorcycles must be between 18 and 70 years old, while applicants for Category A or B licenses must be under 50 years old.
14
3
Share

What is BBA in terms of cars?

BBA is a collective term used online for three German car brands, namely Mercedes-Benz, BMW, and Audi. More information about BBA: 1. Origin of the abbreviation: The reason these three brands are grouped together is not only because they are all German brands but also because their market positioning in China leans towards the mid-to-high end, with relatively higher prices. Additionally, these three brands are among the world's best-selling luxury car brands. 2. Brand introductions: Among them, Mercedes-Benz is a century-old German car brand, considered one of the most successful premium car brands, known for its high technical level, innovation capability, and a series of classic car models that have stood the test of time. BMW is a world-renowned car company that pursues high quality, high performance, and premium-level cars. Audi is a German multinational luxury car manufacturer, primarily engaged in the production of luxury and high-performance cars, and is a member of the Volkswagen Group.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.