How to Deal with Fogging on Car Windows?

1 Answers
JuniperRose
07/30/25 2:21am
Use anti-fog spray: Apply a small amount of defogging agent on the car glass and then wipe it dry. Utilize air convection: Due to seasonal temperature differences between the inside and outside of the car, warm and humid air inside the car meets the cold windshield and then reheats, leading to easy condensation and fog formation. Use the warm air from the air conditioner: Turn on the warm air and direct it toward the glass to quickly heat up the front windshield. Fog: When the relative humidity in the air reaches 100%, water molecules in the air condense into particles suspended in the air. Water droplets refract light, similar to high-density suspended particles in the air, causing natural light to reflect at countless angles. Fog acts as a natural light barrier, obstructing visibility due to the infinite refraction of light by water droplets—this is why visibility is low in foggy conditions. Recommended Methods: In winter, use the "front windshield/footwell" vents while driving. Warm air is less dense than cold air inside the car, so the cold air blown in will rise. Thus, directing airflow from the footwell can make the whole body feel warm. Keeping one vent blowing on the windshield ensures continuous heating—cooling from the outside and heating from the inside prevent the windshield from becoming too cold and fogging up, while warm air also helps dry any gradually condensing moisture. In summer, avoid using the "front windshield/footwell" vents to prevent the windows from becoming too cold.
Was this review help?
12
0
Share
More Forum Discussions

How to Quickly Solve the Problem of a Changan Car Not Starting?

Quick solutions for a Changan car not starting include using jumper cables or an emergency power source, connecting positive to positive first and then negative to negative. Below are the reasons why the car may not start: 1. Fuel Quality Issues: Always refuel at reputable gas stations. When traveling, you can use a gauze to cover the fuel nozzle to filter out impurities. 2. Lack of Antifreeze: Do not use water or low-quality antifreeze in the car, as this can cause the entire cooling system to freeze, potentially cracking the engine block and rendering the water pump inoperable, leading to failure to start and damage to other engine components. 3. Excessive Carbon Buildup: This can prevent the car from starting. The solution is to frequently drive at high speeds to reduce carbon buildup.
2
2
Share

What does mph mean on a car?

mph stands for miles per hour, commonly referred to as 'mile' in terms of car speed, where 1 mile = 1.609344 kilometers per hour. Here is more information about mph: 1. Introduction: Miles per hour (mph) is a unit of speed measurement, indicating miles per hour. It is commonly used in the UK and Commonwealth countries to calculate speed limits on roads, tennis serve speeds, and is also used to measure the central wind speed of tropical cyclones. 2. Chinese measurement unit: km is currently the unit of measurement used in China, while mph is colloquially known as 'mile'. Due to the late start of China's automobile industry, in the early days of the People's Republic, most speed and odometer readings were measured in miles per hour.
11
0
Share

What is KDSS?

KDSS is the English abbreviation for Kinetic-Dynamic-Suspension-System, which translates to Dynamic Suspension System in Chinese. The KDSS structure mainly consists of an electronically controlled dynamic adjustment suspension system. Its function is to adjust the stabilizer bar and balance bar through hydraulic pressure, enhancing the vehicle's performance both on-road and off-road. It combines two opposing performance characteristics. KDSS mode selection for vehicles: There are two modes, Normal mode and Off-road mode. The front and rear stabilizer bars of KDSS each have independent hydraulic cylinders that control vertical movement, connected by a hydraulic system. Each stabilizer bar's hydraulic cylinder is divided into upper and lower chambers, with the front upper and lower hydraulics connected to the rear upper and lower hydraulics via respective hydraulic lines. Each hydraulic line contains an accumulator. KDSS controls a set of valves connected to the accumulator in the hydraulic lines to maintain each stabilizer bar in the optimal state. About KDSS: Composition of KDSS: Electronically controlled dynamic adjustment suspension system. It combines two opposing performance characteristics. Performance description of KDSS: In Normal mode, when the vehicle is in a turning state, it can effectively enhance anti-roll capability. KDSS mode selection: Normal mode: When the vehicle is in a turning state, the outer suspensions of the front and rear wheels are compressed, and the inner suspensions are extended. This causes the stabilizer bar to twist, resisting body roll. The two hydraulic lines between the connected hydraulic pumps have no fluid flow, functioning like a conventional suspension but with improved anti-roll capability. Off-road mode: When one of the four wheels encounters an obstacle and is lifted, the suspension of the lifted wheel is compressed, and the stabilizer bar rises with the hydraulic pump. Fluid flows between the two hydraulic lines of the front and rear pumps, absorbing the stabilizer bar's twist. Since the stabilizer bar does not twist, the suspension travel is greater than that of a conventional suspension and can be adjusted according to different road conditions. It can automatically deactivate the stabilizer bar's function based on road conditions. Working principle of KDSS: It uses two hydraulic cylinders to control a fixed point (left fixed point) on the front and rear suspension stabilizer bars. Under normal driving conditions, this fixed point is locked, and the stabilizer bar functions normally, performing anti-roll duties during turns. In off-road conditions, as the suspension is continuously compressed and extended, the fixed point is released, moving with the hydraulic cylinder. The rotational constraint of the stabilizer bar along the X-axis (vehicle length direction) is also released, allowing rotation around the right fixed point without any effect, ensuring no impact on wheel grounding. This allows significant vertical displacement between the left and right wheels, improving tire grounding performance and off-road capability.
16
1
Share

Is Engine Seizure Considered a Major Overhaul?

Engine seizure is considered a major overhaul, and it can only be addressed through a major overhaul. In the true sense, "engine seizure" should actually be written as "piston seizure." Simply put, it means the piston in the car's engine gets stuck with the cylinder liner. The cause of this failure is that the piston, due to a lack of oil cooling, overheats and expands, becoming stuck in the cylinder and unable to move. Relevant information about car engines is as follows: 1. Introduction: The car engine is the device that provides power to the vehicle, serving as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental performance. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. 2. Classification: Based on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid types, among others.
5
1
Share

Do Parallel Imported Vehicles Enjoy Warranty Coverage?

Parallel imported vehicles indeed do not enjoy official warranty policies, but this does not mean they are completely without warranty. Currently, in the field of parallel imported vehicles, relevant legal regulations stipulate that the company issuing the final vehicle sales invoice for the vehicle must provide warranty coverage. Therefore, all parallel imported vehicle dealers will require customers to purchase whole vehicle quality warranty products. Relevant information about vehicle maintenance is as follows: 1. Introduction: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Maintenance Scope: Modern vehicle maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas.
8
5
Share

What is the appropriate temperature for the car's coolant?

Car coolant temperature is normal between 80 to 90 degrees Celsius. More details are as follows: 1. Coolant temperature: The coolant temperature refers to the temperature of the antifreeze. Besides oil passages, the engine is also equipped with antifreeze passages. 2. Antifreeze: The full name of antifreeze is antifreeze coolant, and its important functions are cooling and reducing the engine temperature, while also providing freeze protection in winter. 3. Abnormal coolant temperature: When the coolant temperature reaches 90 degrees, it indicates that the engine's heat generation has stabilized. Both excessively high and low temperatures can easily damage the engine. Low temperatures are not conducive to engine lubrication, while high temperatures can lead to engine self-ignition.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.