How to Deal with Fogging Inside the Car?

2 Answers
VanGabriel
07/24/25 4:36am
The methods to deal with fogging inside the car are: 1. Open windows for ventilation: If the fog inside the car is not heavy, you can slightly open the windows on both sides to allow air circulation between the inside and outside of the car. This will reduce the temperature difference and gradually dissipate the fog. 2. Use the air conditioning system: Simply adjust the air conditioning to the appropriate setting to blow air and remove the fog. 3. Apply anti-fog spray: Spray the anti-fog agent onto the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a protective film to prevent moisture from condensing on the glass and forming fog. One application can prevent fogging for up to ten days. Car owners can also mix water and dishwashing liquid in a 9:1 ratio and spray it on the front windshield and side windows during rainy summer days when fogging is likely to occur. After drying, wipe it clean with a soft tissue to prevent fogging.
Was this review help?
16
3
Share
ParkerRose
08/11/25 12:15am
One winter morning while driving, my car windows suddenly fogged up, making it impossible to see anything. I was so startled that I immediately slowed down. At that moment, I directly activated the defogging mode on the air conditioning by pressing the button with the front windshield symbol, adjusted the air direction to blow towards the front window, set the temperature dial to the middle warm air position, and turned on the A/C switch—this helps dry the air. The fog cleared in less than a minute. Now I’ve gotten used to it: every day before driving, I wipe the inside of the windows with a towel to reduce moisture buildup. If it’s rainy or there are many passengers sweating, I crack open the windows slightly beforehand to balance the interior and exterior temperatures. For long trips, I also keep a small defogging spray handy, using it occasionally to prevent fog from reappearing. Regular cleaning of the windshield is crucial too—excessive oil film makes fogging more likely, so I use a neutral cleaner to wipe it down once a month.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

Can You Still Drive If the Oxygen Sensor Is Broken?

Automobiles typically have two oxygen sensors: the front oxygen sensor and the rear oxygen sensor. If the front oxygen sensor is broken, you should not continue driving and need to replace it as soon as possible. If it is the rear oxygen sensor, you can continue driving without urgent replacement. Below is an introduction to oxygen sensors: 1. Classification of oxygen sensors: Automobiles usually have two oxygen sensors, one front and one rear. The front oxygen sensor is generally installed on the exhaust manifold, while the rear oxygen sensor is installed behind the three-way catalytic converter. They play different roles in the exhaust system, so the symptoms of damage will also vary. 2. Function of oxygen sensors: They are critical feedback sensors in the electronic fuel injection engine control system, key components for controlling vehicle exhaust emissions, reducing environmental pollution caused by automobiles, and improving the fuel combustion quality of car engines. There are two types of oxygen sensors: zirconia and titania.
14
5
Share

Why Does the Outside of the Windshield Fog Up When the Car Air Conditioner is On?

Fogging on the outside of the windshield when the car air conditioner is on is caused by a significant temperature difference between the interior and exterior of the vehicle in the current environment. If the automatic air conditioning system allows selection of air vent positions, choosing the front windshield and center vent positions while turning on the rear windshield heating function can prevent fogging. You can activate the front windshield defrosting function and the rear windshield heating function. If the side windows fog up, slightly opening the windows can quickly remove the fog before closing them again. To use the air conditioner for defogging, adjust the air direction knob to the defogging position (i.e., blowing upward). For automatic air conditioning, simply press the defogging button for a very noticeable effect. It's important to note that the AC switch must be turned on (i.e., in cooling mode) as natural wind will not be effective.
5
1
Share

What is the difference between crystal coating and waxing?

The differences between crystal coating, film coating, and waxing are as follows: 1. First, there is a difference in price: waxing has the lowest cost, film coating is more expensive, and crystal coating is moderately priced. 2. There is also a difference in the duration of effectiveness: waxing lasts the shortest, about 1 month, film coating lasts longer, around 6 months, while crystal coating lasts the longest, up to 1 year. Additional information: The primary functions of waxing are waterproofing and protection against acid rain. Due to the protection of car wax, the amount of water droplets adhering to the car body is significantly reduced, with an effectiveness rate of 50% to 90%. Secondly, it protects against high temperatures and UV rays, prevents static electricity, and of course, also repels dust. At the same time, it makes the car body look newer.
18
1
Share

How to turn off the navigation in Haval H6?

Haval H6 navigation shutdown method: On the navigation interface, select the second option at the bottom labeled 'Route', then choose the last option 'Turn off navigation'. Alternatively, you can directly click 'Cancel navigation'. The car GPS navigation system consists of two parts: one part is the GPS receiver and display device installed in the car, and the other part is the computer control center. The Haval H6 is equipped with a 12.3-inch full LCD instrument panel, electronic handbrake, automatic parking, car-to-phone connectivity, human-machine interaction system, dual-zone automatic air conditioning, smart keyless entry, one-button start. In terms of body size, the Haval H6 measures 4649mm in length, 1852mm in width, 1710mm in height, with a wheelbase of 2680mm.
5
0
Share

How to reset the maintenance light on Peugeot 3008?

The method to reset the maintenance light on Peugeot 3008 is as follows: 1. Turn off the ignition switch. 2. Press and hold the maintenance mileage reset button. 3. Press the one-touch start button, and the odometer display will begin the countdown. 4. When the display shows "=0", it means the maintenance indicator light has been successfully reset. 5. After releasing the reset button, the wrench symbol (maintenance indicator light) will turn off. More information about the Peugeot 3008 is as follows: 1. In terms of power, the domestically produced 3008 offers two engine options: 2.0L and 1.6T. 2. The 2.0L model provides two transmission choices: a 6-speed automatic manual transmission and a 5-speed manual transmission.
13
2
Share

Can Water Be Used to Cool Tires During Long-Distance High-Speed Driving?

Long-distance high-speed tires should not be cooled with water. The correct approach is to stop the vehicle immediately and wait for the brake drums or tires to cool down naturally before continuing. Otherwise, it may lead to brake failure, increased tire wear, or even a tire blowout. Avoid the temptation to save time by splashing cold water, as this can cause the tires and friction linings to delaminate or crack, and the brake drums to deform due to uneven cooling. Here are some relevant tips: Avoid prolonged driving; take appropriate breaks during long trips to reduce fuel temperature. Monitor the water temperature to prevent overheating, which can also cause the engine to stall. If the engine stalls frequently during the journey, park the vehicle in a safe location, open the fuel filler cap and the engine hood for about half an hour before restarting. Most importantly, listen for any abnormal noises from the fuel pump. If none are heard, you can continue driving normally.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.