How to Deal with Fog and Water Droplets in Car Headlights?

1 Answers
LaTimothy
07/28/25 7:15pm
You can turn on the headlights, and within 15 minutes, the heat generated by the headlights will evaporate the fog or expel it through the vent rubber tube along with the hot air. You can also place car headlight desiccant inside the headlights to dissipate the fog.
Was this review help?
14
3
Share
More Forum Discussions

What to Do When Tesla Screen Freezes and Becomes Unresponsive?

Press and hold both scroll wheels on the steering wheel simultaneously to restart the central control screen. Additionally, press and hold the buttons above the two scroll wheels on the steering wheel simultaneously to restart the dashboard. Shift the gear to "Park" mode, then press and hold both scroll wheels on the steering wheel until the screen turns off. After ensuring it is off, wait for approximately 30 seconds.
10
2
Share

How to Operate Starting and Stopping at Traffic Lights?

Gently press the brake pedal, fully depress the clutch, then slowly press the brake pedal again. Once the brake is fully engaged, shift gears into first. Release the clutch, then release the brake. Gradually release the clutch while gently pressing the accelerator, then release the accelerator, depress the clutch, shift to second gear, release the clutch and brake, and finally accelerate.
15
1
Share

What are the types of vehicles?

Vehicle types include micro cars, small cars, compact cars, midsize cars, large cars, and luxury cars. Introduction to different vehicle types: Micro cars: Typically refers to vehicles with a wheelbase below 2400mm. Small cars: Usually refers to vehicles with a wheelbase between 2400-2550mm. Compact cars: Generally refers to vehicles with a wheelbase between 2550-2700mm. Midsize cars: Typically refers to vehicles with a wheelbase between 2700-2850mm. Large cars: Usually refers to vehicles with a wheelbase between 2850-3000mm. Luxury cars: Generally refers to vehicles with a wheelbase above 3000mm. Vehicle classification: Class 1 vehicles: Sedans and passenger vehicles with 7 seats (including 7 seats) or less, and trucks with a weight of 2 tons (including 2 tons) or less. Class 2 vehicles: Passenger vehicles with 8 to 19 seats, and trucks with a weight above 2 tons up to 5 tons (including 5 tons). Class 3 vehicles: Passenger vehicles with 20 to 39 seats, trucks with a weight above 5 tons up to 10 tons (including 10 tons), and 20-foot container trucks. Class 4 vehicles: Passenger vehicles with 40 seats (including 40 seats) or more, trucks with a weight above 10 tons up to 15 tons (including 15 tons), and 40-foot container trucks. Class 5 vehicles: Trucks with a weight above 15 tons.
6
3
Share

How to Conduct Annual Inspection for 7-Seater Vehicles with 6-Year Exemption?

Every two years when regular inspection is required, the vehicle owner can directly apply for the inspection label from the traffic management department of the public security authority after submitting the relevant documents. The inspection cycle has been relaxed from once a year to once every two years, meaning only two on-site inspections are needed within 10 years, specifically in the 6th and 8th years. Vehicles require an annual inspection, and those over 15 years old need to be inspected every six months.
13
4
Share

How to Repair Scratches on the Rearview Mirror Plastic Shell?

Use a compound to treat the scratches by wiping in straight lines, then apply wax. Start with coarse wax followed by fine wax, moving in the same direction from the inside out to remove minor scratches. Before using a touch-up pen, shake the paint inside thoroughly. Apply the base coat like nail polish, and you can add a certain amount of thinner to the touch-up pen to ensure smooth spraying. First, wash and dry the car. Apply rust remover to the scratched area, wait for 10-15 minutes, then wipe off the rust remover with a tissue to prevent further rusting in the scratched area.
2
1
Share

What Causes the Car to Indicate Engine Malfunction?

Car indicating engine malfunction is caused by poor gasoline quality and excessive carbon deposits. Below are the detailed explanations: Poor Gasoline Quality: Poor gasoline quality leads to incomplete combustion of the air-fuel mixture in the cylinders, triggering the pollution warning light, and also easily causes carbon deposits. Carbon deposits in the intake tract and on the piston tops can result in poor atomization, leading to incomplete combustion and thus illuminating the pollution warning light. During cold starts, especially when the temperature drops sharply, the pollution warning light may come on due to the ECU's temperature correction issues during startup. However, once the temperature stabilizes at a certain level without fluctuations, the situation will become relatively stable. Excessive Carbon Deposits: Excessive carbon deposits can make ignition difficult, causing the ignition coil to reverse breakdown and fail, leading to poor ignition and incomplete combustion, which triggers the pollution warning light. A distinctive feature of this phenomenon is that when the ignition coil fails, the engine will continuously experience severe shaking. If the severe shaking is not continuous, the issue can essentially be ruled out as an ignition coil problem.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.