How to Deal with Flooded Cars in Zhengzhou?

2 Answers
DylanLee
07/25/25 4:47pm
If your car is flooded, it should be towed to a repair shop immediately for repairs. If the vehicle's electrical system is short-circuited due to water, you can let the circuits dry naturally or use a hairdryer to dry them. If water enters the exhaust pipe or air intake, the car must be towed to a repair shop for inspection. Do not attempt to restart the car to avoid causing damage to the engine; moreover, the insurance company will not cover the claim.
Was this review help?
2
5
Share
VonAugust
08/11/25 9:56pm
I've experienced several cases of flooded vehicles. My advice is to immediately cut off the power and never attempt to start the car, otherwise water entering the engine will completely ruin it. Contact towing services right away – in Zhengzhou, there are some rescue companies that specialize in handling flood-damaged vehicles. Once towed to the repair shop, the technician will check if the water level has passed the dashboard. If it has, the engine is basically beyond saving and you'll need to consider scrapping the car. If it only reached the floor, cleaning out the mud and water can still save it. Regarding insurance, remember to file a claim and take photos for evidence. This usually falls under natural disaster coverage. The whole process takes about a day or two, and in the end, drying out the interior and replacing some parts can easily cost several thousand yuan. To prevent this from happening again, park your car on higher ground to avoid trouble.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

Which company produces NIO cars?

NIO cars are produced by NIO Inc. Below is a detailed introduction to NIO cars: 1. NIO primarily manufactures intelligent electric vehicles and is a global brand. Its main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, and NIO EP9. 2. Taking the NIO ES6 as an example, its safety features include driver/passenger airbags, front side airbags, front/rear head airbags, seatbelt reminder, rear child seat anchors, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, electronic stability control, blind-spot monitoring, lane departure warning, autonomous emergency braking, and fatigue driving alert. 3. The assistance systems include front/rear parking sensors, 360-degree panoramic camera, cruise control, driving mode selection, engine start-stop technology, auto hold, hill start assist, hill descent control, adjustable suspension stiffness, panoramic sunroof, power tailgate, hands-free tailgate, keyless start system, keyless entry, active grille shutters, remote start, and battery pre-heating.
4
3
Share

How many liters of engine oil does the BYD S7 require?

The BYD S7 requires 4 liters of engine oil. The manufacturer provides two types of fully synthetic engine oil for the S7, both with a viscosity rating of 5W-40. The standard oil is available in 4L and 1L containers, while the premium "Qinghu" oil is only available in 4L containers. BYD S7 Specifications: The BYD S7 is BYD's new mid-to-large SUV, featuring sharp lines and aerodynamic design. It comes with window frame bright trim and a chrome-plated grille. The exterior adopts a new front-face design, where the U-shaped front grille integrates with the headlights, complemented by a large chrome grille. The headlights also include LED daytime running lights with linear light sources. In terms of power, the BYD S7 is equipped with a 2.0TI powertrain and an all-wheel-drive system, consisting of a 2.0L turbocharged direct-injection engine and a 6-speed wet dual-clutch transmission (coded 6DT35). Notes on Engine Oil Replacement: Engine oil should be replaced regularly. Oils of different grades should not be mixed, as although the lubrication properties remain unchanged, the composition of the oil will alter, leading to degraded performance and potential engine damage. Therefore, mixing different oil grades is not recommended. Fully synthetic oil should be replaced every 8,000-10,000 km, semi-synthetic every 5,000-8,000 km, and mineral oil around every 5,000 km. Regularly clean the engine filter and replace the oil filter. After adding oil, sludge and carbon deposits on engine parts disperse into the oil, causing it to darken over time. The need for replacement should be determined by the oil's viscosity rather than its color. Insufficient oil can lead to inadequate lubrication and cylinder scoring, while excessive oil can reduce vehicle power and increase fuel consumption.
20
0
Share

How to Turn on the Wiper of Tiguan L?

Here are the methods to turn on and use the automatic wiper of Volkswagen Tiguan L: 1. Pull the lever toward the driver to spray windshield washer fluid on the front windshield wiper. 2. The wiper will only work automatically in AUTO mode. When the vehicle sensor receives a certain amount of rain signal, it will activate the wiper. 3. The higher you lift the wiper switch, the faster the frequency. LOW means low-speed gear, and HIGH means high-speed gear. 4. The OFF gear is to turn off the switch, and the wiper is not used when twisted to this position. 5. 1X: The wiper swings once, and the lever will automatically rebound.
5
2
Share

How to Adjust the Time on a Volkswagen?

Here are the steps to adjust the time on a Volkswagen: 1. There are two buttons on the dashboard: the left one has a time symbol, and the right one is the SET button. First, press the left time button. When the time on the trip computer starts flashing, press the right SET button. 2. Pressing SET once adjusts the time by one increment. If adjusting one by one is too tedious, you can also press and hold the SET button for about 4-5 seconds, then release. The time digits will then start jumping rapidly. 3. Once the time reaches the desired setting, press the SET button once more to confirm and complete the setup.
4
2
Share

What transmission does the Chevrolet Tracker use?

The Chevrolet Tracker is equipped with a CVT transmission across all models, which is a relatively common type of automatic transmission. The structure of the CVT transmission is very simple, consisting of only two cone pulleys and a steel belt. The steel belt can move along the cone pulleys, allowing the transmission to change gears and torque. The CVT transmission provides a nearly seamless shifting experience, keeping the engine within an optimal RPM range, thereby improving fuel efficiency. This type of transmission is well-suited for family vehicles. Here are specific details about the Chevrolet Tracker: 1. The Chevrolet Tracker is powered by a 1.3-liter three-cylinder turbocharged engine, delivering 121 horsepower and a maximum torque of 240 Nm. The engine's peak power is achieved at 5,600 RPM, while the maximum torque is available between 1,500 and 4,000 RPM. The engine features direct fuel injection technology and utilizes an aluminum cylinder head and block. 2. The front suspension of the Chevrolet Tracker uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The torsion beam suspension has a simple structure, compact size, and takes up minimal space. Using a torsion beam rear suspension helps maximize rear passenger and trunk space, which is crucial for a family-oriented SUV.
15
2
Share

What color is the turn signal of the Teana?

The turn signal of the Teana is red. The turn signal is an important indicator light that is turned on when a motor vehicle is turning to alert vehicles and pedestrians in front, behind, and to the sides. The turn signal tube uses a xenon tube, controlled by a microcontroller circuit, with left and right alternating flashes working continuously. The turn signal uses a flasher to achieve blinking lights. It can mainly be divided into three types: resistance wire type, capacitor type, and electronic type. Below is relevant information about car turn signals: 1. When making a U-turn, the left turn signal should be turned on, and attention should be paid to observing whether there are any vehicles in front of or behind the car before proceeding with the turn; 2. On road sections without marked center solid lines, when overtaking is needed, the left turn signal should be turned on and the horn should be sounded. If being overtaken, the car should yield by moving to the right; 3. When needing to pull over while driving, the right turn signal should be turned on in advance, and attention should be paid to observing the traffic dynamics on the right rear of the car before pulling over; 4. When leaving a parking spot, the left turn signal should be turned on in advance, and attention should be paid to observing the traffic dynamics on the left rear of the car before merging into the traffic lane.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.