···
Log in / Register

How to Deal with Excessive Oil Temperature?

4 Answers
Percy
07/29/25 1:33pm

To reduce oil temperature, the common method is to 'reduce load and lower engine speed'. Here are the relevant details: 1. Coolant: Although the heat exchange time is longer at high-temperature components, slowing down the water flow rate will prolong the heat dissipation time. At the same time, due to the reduced load and lower engine speed, the heat generated by friction of moving parts is also reduced accordingly. Therefore, lowering the oil temperature can not only reduce the heat generated by the engine but also indirectly decrease the heat absorbed by the coolant, thereby slowing down the rate at which the coolant temperature rises. 2. Genuine Engine Oil: To prevent excessive oil temperature, car owners should regularly check the oil cooler, choose the correct grade and viscosity level of genuine engine oil, and avoid overloading the engine during use, especially prolonged overloading.

Was this review help?
7
0
Share
AmyMarie
08/14/25 4:18am

A few days ago, while driving on the highway, my car's oil temperature suddenly spiked, and the red warning light on the dashboard came on. My heart skipped a beat, and I immediately pulled over and turned off the engine. I didn’t rush to open the hood to avoid burns. After letting the engine cool for over ten minutes, I lifted the hood to check if the oil level was sufficient and whether the oil was dirty. I also confirmed that the coolant level was normal and that the radiator wasn’t clogged. The issue turned out to be caused by prolonged uphill driving under heavy load. Later, I changed the oil and cleaned the radiator fins, and the problem hasn’t recurred since. High oil temperature can lead to cylinder scoring and engine damage, which is expensive to repair. I recommend paying close attention to dashboard readings to detect and address issues early, saving both hassle and money.

Was this review help?
16
2
Share
Expand All
OWillow
10/10/25 3:46am

Common causes of excessive oil temperature include poor heat dissipation, insufficient or deteriorated oil, and poor driving habits such as high-speed climbing. When dealing with it, prioritize parking to cool down, check the oil dipstick for quantity and color changes; see if the coolant is sufficient and whether the radiator is dirty or clogged; check if the fan is rotating normally. If it occurs frequently, it may be due to thermostat failure or water pump issues, requiring professional inspection. Maintaining good maintenance habits, such as regular oil changes and cleaning the radiator vents, is key to reducing problems. Those with limited mechanical skills should not attempt repairs and should promptly visit a repair shop—safety first.

Was this review help?
10
0
Share
Expand All
OSteven
11/23/25 4:57am

If the oil temperature warning light comes on while driving, you must stop immediately to avoid more serious damage, especially on mountain roads at night. After turning off the engine, wait for it to cool down for half an hour, then check the oil and coolant levels carefully and top them up if necessary. Overheating can burn seals, pistons, and cause severe wear, so avoid driving under such conditions and head to a repair shop as soon as possible to identify the root cause. Pay attention to dashboard readings during daily driving and never ignore minor warning signals.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

Why does the car fail to start due to brake failure?

The reasons for failing to start due to brake failure are as follows: 1. Brake shoe failure, abnormal or irregular wear; brake pads need to be replaced; 2. Oil leakage (brake fluid), insufficient brake fluid; simply replace the brake fluid; 3. ABS system failure, abnormal wheel speed sensor or wiring; check if the battery is low on power and charge it in time; 4. Spark plug failure, leading to an increased ignition gap, causing failure to start. Simply replace the spark plug. Additional information: 1. ABS system failure, abnormal wheel speed sensor or wiring, brake cylinder failure, such as fluid leakage or poor return. This situation indicates a parking brake system failure. It is recommended to contact professional maintenance personnel at a 4S shop to use a computer to check the specific fault content and then carry out targeted repairs. 2. If the vehicle's brakes fail, the vehicle is not allowed to drive. After the vehicle's brakes fail, the vehicle's braking system will be ineffective, and driving a vehicle without a braking system on the road is very dangerous. After the vehicle's braking system fails, the vehicle must be sent for repair immediately, and a tow truck can be used.
14
4
Share

What does M+ and M- mean in an automatic transmission?

M+ and M- are features found in vehicles with a manual-automatic transmission. The manual mode (M) of a manual-automatic transmission includes M+ and M-, allowing for both automatic and manual shifting. To use the manual mode, move the gear lever to the position between M+ and M-. Pushing the lever toward M+ shifts up one gear, while pushing it toward M- shifts down one gear. Additional information: 1. A manual-automatic transmission car refers to a vehicle equipped with a "manual-automatic" transmission, which combines both manual and automatic shifting modes. These transmissions have prominent +/- indicators, allowing the driver to manually switch gears by moving the lever to this position. 2. Structurally, a manual-automatic transmission is still an automatic transmission. Therefore, it retains some drawbacks of conventional automatic transmissions, such as relatively higher fuel consumption and limited modification potential. Additionally, since these transmissions are often imported, their cost is significantly higher than standard transmissions, leading to higher overall vehicle prices.
18
2
Share

What Do the Numbers on Tires Mean?

Tire model such as: 225/60-R17-99H, 225 represents the section width, simply understood as the width of the tire tread. 60 represents the aspect ratio, simply understood as the height of the tire sidewall. R represents the tire type code, where R stands for radial tire. 17 represents the rim diameter, indicating that the tire is suitable for 17-inch rims. 99 represents the load index of the tire, which is the maximum weight the tire can bear. A load index of 99 means the tire can bear a maximum weight of 775KG. H represents the speed rating of the tire, which is the maximum speed the tire can handle. A speed rating of H means the tire can handle speeds up to 210KM/H. Additional information: 1. Tire specifications: Car tire specifications are commonly represented by a set of numbers, where the first number indicates the tire section width, and the second indicates the rim diameter, in inches. 2. For example, 210/50R18 means a tire width of 210 millimeters, an aspect ratio of 50, and a rim diameter of 18 inches. The letters or symbols in the middle have special meanings: "X" indicates a high-pressure tire; "R" and "Z" indicate radial tires; "-" indicates a low-pressure tire.
8
0
Share

What is the comprehensive fuel consumption of the Jetta VS5?

Jetta VS5's comprehensive fuel consumption is 6.2-6.8L/100km. There are currently 5 models of Jetta VS5 on sale: the manual Yuexiang Pro and manual Jinqu Pro, with a comprehensive fuel consumption of 6.2L/100km. The automatic Yuexiang Pro, automatic Jinqu Pro, and automatic Rongyao Pro have a comprehensive fuel consumption of 6.8L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 7.5-8.2L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
10
2
Share

How to Tell if the Catalytic Converter Has Been Removed?

You can check by its appearance. A normal catalytic converter should have uniformly arranged and evenly sized pores in its internal porous ceramic, which should also be clean and relatively white (a yellowish beige color indicates a counterfeit). The porous ceramic inside the catalytic converter serves as a carrier and should be firmly and securely assembled with the outer shell, with no signs of looseness. A replacement catalytic converter should match the original factory specifications in terms of size, the material of the internal porous ceramic, the arrangement of the pores, and the number of rows. Additional information: 1. The catalytic converter is the most important external purification device installed in a car's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from the car's exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. 2. When high-temperature exhaust gases pass through the purification device, the catalyst in the catalytic converter enhances the activity of CO, HC, and NOx, promoting specific oxidation-reduction chemical reactions. CO oxidizes at high temperatures into colorless, non-toxic carbon dioxide gas; HC compounds oxidize into water (H2O) and carbon dioxide; and NOx is reduced into nitrogen and oxygen. These three harmful gases are transformed into harmless gases, thereby purifying the car's exhaust.
9
4
Share

Is it necessary to repair transmission noise?

Transmission noise should be repaired. The causes of transmission noise failure are as follows: 1. Deformation of the transmission housing; 2. Loose or disassembled bearings; 3. Severe gear wear or broken teeth; 4. Overloading may cause bending of the transmission input or output shaft, or severe wear of the splines on the shaft; 5. Severe wear of the synchronizer. The following are the precursors of transmission failure: 1. Symptoms of transmission slipping. Fault performance: During driving, you can hear the engine idling when accelerating, but the car does not show a significant speed increase and has weak acceleration; another situation is that the car drives normally on flat roads but has weak power when going uphill, and the engine speed is very high. 2. Transmission noise. Fault performance: When the car is idling, driving, or under high-load driving, you hear abnormal noises from the transmission, even loud noises, and there are irregular, dull sounds when shifting gears. 3. Overheating of the transmission. Fault performance: The computer alarm shows that the transmission temperature is too high during driving; or after driving for a while, you feel that the transmission is overheating, even too hot to touch. 4. Symptoms of transmission oil leakage. Fault performance: You can clearly feel that the car is difficult to start, and during driving, although the engine speed increases when stepping on the accelerator, the car does not show obvious signs of acceleration.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.