How to Deal with Excessive Noise Inside the Car?

2 Answers
OHector
09/05/25 4:53am
There are four solutions to car noise: 1. Engine noise: The vehicle engine is a source of noise, and its noise varies with the engine speed. Solution: Install some high-quality sound-absorbing foam materials on the engine cover, which can not only suppress the vibration caused by the hood but also absorb a large amount of noise, with noticeable effects. 2. Tire noise: Tire noise is generated by the friction between the tires and the road surface when the vehicle is driving at high speed. The level of tire noise depends on the road and vehicle conditions—the worse the road condition, the greater the tire noise. Additionally, there is a significant difference in tire noise between asphalt and concrete roads. Solution: Tire noise is a type of structural noise, primarily caused by vibration. The most reasonable solution is vibration control. Adding damping plates along with sound-absorbing pads can effectively address road and tire noise. 3. Wind noise: Wind noise occurs when the pressure of the oncoming wind exceeds the sealing resistance of the car doors during high-speed driving, entering the car. The faster the speed, the greater the wind noise. Solution: Install or replace the door sealing strips. Since sealing strips are rubber products, they can age over time, leading to reduced sound insulation and sealing effectiveness. 4. Body structure noise: This is mainly influenced by two factors—the vibration transmission method of the body structure and the noise generated by the metal components of the body under internal and external forces. Solution: This issue rarely occurs in new cars. Check whether the screws on the body components are loose. Generally, tightening the screws or replacing the parts can resolve the problem.
Was this review help?
3
0
Share
DelTimothy
09/17/25 5:21am
As a seasoned driver with over a decade of experience, I've encountered numerous in-car noise issues, typically stemming from tires or wind interference affecting driving comfort. The most straightforward solution is to check tire conditions—if tires are severely worn or have uneven pressure, they can produce a humming sound. I recommend switching to noise-reducing tires, like certain Michelin models, which are quite reliable. Next, inspect the door and window seals; if they're aged, they can leak air and cause wind noise. Spending a little to replace them or applying soundproofing tape can help. Adding soundproofing material under the hood is also effective, but don't overdo it to avoid affecting heat dissipation. While driving, maintain a steady speed, avoid bumpy roads, and refrain from sudden acceleration. Excessive noise isn't just annoying—it can also distract and lead to accidents. I regularly perform these checks to ensure both safety and comfort.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to Handle the Vehicle Transfer Procedures for Used Cars?

Steps for handling the vehicle transfer procedures for used cars: 1. Submit relevant documents, mainly including the identity proofs of the buyer and their agent, the motor vehicle registration certificate, the motor vehicle driving license, etc.; 2. Obtain and fill out a motor vehicle change, transfer, modification, suspension, or scrapping approval form, fill in the required columns, and stamp it with the same seal as the original registration. Private vehicles need to have the owner's ID card verified; 3. Submit the documents to the traffic police team for review by the responsible person; 4. Vehicles that meet the transfer conditions will be sent to the motor vehicle inspection station for inspection and verification; 5. After passing the inspection, vehicles transferred or changed within the same county can directly go to the license management station to wait for the payment notice; 6. Pay the transaction tax; 7. The buyer takes the new motor vehicle registration certificate and driving license to the relevant departments to handle the vehicle purchase tax, vehicle and vessel usage tax, and insurance change procedures.
17
4
Share

What is the Volkswagen GTI?

Volkswagen GTI generally refers to the Golf GTI, which is the high-performance version of the Golf. In terms of body dimensions, the Volkswagen Golf GTI measures 4255 mm in length, 1799 mm in width, and 1452 mm in height, with a wheelbase of 2637 mm. Regarding configuration, the Volkswagen Golf GTI comes standard with six airbags, as well as ABS, ESP system, intelligent air conditioning, multi-function display, and other features. In terms of power, the Volkswagen Golf GTI is equipped with a 2.0-liter four-cylinder turbocharged engine, which delivers a maximum horsepower of 220 PS, a maximum power of 162 kW, and a maximum torque of 350 Nm.
14
0
Share

Will V-KOOL VK70 affect the use of ETC?

V-KOOL VK70 will not affect the use of ETC, as the film material is still plastic and will not interfere with wireless signals. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Label Invalid, Please Insert Card," indicating the device is functioning properly. Clean the front windshield, ensuring the glass surface is smooth, clean, and dry. Then peel off the adhesive backing of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC faster, more efficient, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
18
2
Share

Which country does the Venucia brand belong to?

Venucia is a Chinese brand, a joint venture domestic brand under Dongfeng Nissan, established by the joint venture between Japan's Nissan Motor Co., Ltd. and China's Dongfeng Motor Corporation. The Dongfeng Venucia brand currently offers products such as the 30 series, 50 series, 60 series, 70 series, 90 series, and the Morning Wind electric vehicle, covering the sedan, SUV, MPV, and new energy vehicle markets. Taking the Venucia D60 as an example: The Venucia D60 is a new compact sedan under Dongfeng Venucia, featuring the brand's Wind Sculpture design philosophy with a low and flat front fascia. In terms of features, the Venucia D60 comes equipped with keyless start, auto start-stop, multifunction steering wheel, power-folding mirrors, cruise control, and a rearview camera.
17
0
Share

Differences Between the 2009 and 2012 Highlander Models

Specific differences between the 2009 and 2012 Highlander models are as follows: 1. Differences in powertrain. The 2012 Highlander is a minor facelift of the 2009 Highlander. The maximum output power of the 2.7L engine in the 2012 Highlander is 138 kW, while the 2009 Highlander's 2.7L engine delivers 140 kW, representing a reduction of 2 kW. 2. Exterior design. The 2012 Highlander features modified headlights equipped with halogen bulbs, and its overall appearance is more stylish compared to the 2009 Highlander.
12
3
Share

Should New Tires Be Installed on the Front or Rear Wheels?

Whether new tires should be installed on the front or rear wheels depends on the situation: 1. For front-wheel-drive vehicles, new tires should be placed on the front. Front-wheel-drive cars require the front wheels to handle high loads, including daily steering, acceleration, and braking, all of which rely on the front wheels. As a result, the front wheels are more prone to blowouts. 2. For rear-wheel-drive vehicles, new tires should be installed on the rear wheels. If the rear tires of a rear-wheel-drive car show severe tread wear, the vehicle may experience skidding and reduced grip. 3. For four-wheel-drive vehicles, replace tires on the same axle. The wear difference between front and rear wheels in four-wheel-drive vehicles is usually minimal. When replacing tires, it is recommended that owners replace at least two tires on the same axle—either both front or both rear tires.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.