How to Deal with Excessive Engine Noise in Vehicles?

Is it normal for the engine to run at high RPM when just started?

It is normal for the engine to run at high RPM when started. The car needs high RPM to allow the engine to quickly reach normal operating conditions, requiring a richer air-fuel mixture, increased air intake, and fuel injection, resulting in higher RPM. Cold weather lowers the water temperature, causing the engine idle speed to increase. Depending on the water temperature, the cold engine idle speed will gradually decrease from over 1200 RPM until the engine reaches the normal operating temperature, stabilizing at the standard idle speed of around 800 RPM. High RPM is generally caused by excessive carbon deposits, and timely cleaning of the throttle valve can resolve the issue. Other reasons for high engine idle speed include: 1. Idle switch not closing; 2. Faulty idle control valve; 3. Air intake pipe leakage; 4. Incorrect valve timing; 5. Fuel injector dripping or clogging; 6. Exhaust system blockage; 7. EGR valve opening during idle conditions.

8

4

Share

How long after failing the driving test can I make a new appointment?

For the motor vehicle driver's license test, if you fail the subject three (road test), you must wait at least ten days before reapplying for a new test appointment. The details are as follows: 1. Failing the subject three test: According to Article 37 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses', each subject test can be taken once, and if failed, a retake is allowed once. If you do not take the retake or still fail the retake, the test process is terminated, and you must make a new test appointment, but subject two and subject three tests must be scheduled at least ten days later. If you fail the subject three safety and civilized driving knowledge test, the passed road driving skill test scores remain valid. 2. Test appointment limits: Within the validity period of the driving skill test permit, the number of test appointments for subject two and subject three road driving skill tests cannot exceed five. If you still fail the fifth test appointment, the passed scores of other subjects will be invalidated.

20

5

Share

How to Fold Down the Rear Seats in the Lavida Sport?

Method for folding down the rear seats in the Lavida Sport: There are two screws at the lower leg area of the rear seats. Simply unscrew them and lift upwards with force. In other words, first press down with your hand and then pull upwards firmly to fold them down. The rear seats feature a one-piece folding backrest design. When additional space is required, the rear seat backrest can be folded down to create more room. However, the rear seats cannot accommodate passengers when folded down. The Lavida Sport is a model launched by Shanghai Volkswagen. In terms of body dimensions, it measures 4454mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. Exterior-wise, the Lavida Sport's front fascia inherits Volkswagen Group's consistently excellent design quality, adopting a horizontal grille design that delivers a robust and sophisticated visual effect. The seamlessly integrated upper grille and front headlights on both sides accentuate the model's athletic and dynamic silhouette with distinctive family-inspired styling.

19

2

Share

Can You Pour Water on an Overheated Motorcycle Engine?

No. Pouring water to cool down the engine may cause cylinder deformation, reduced power, shortened engine lifespan, and other issues. Here are the relevant explanations: Hazards of pouring water: If water is poured directly onto a hot engine, the external part of the engine will contract sharply due to sudden cooling, while the internal part will expand due to high temperature. This imbalance between external contraction and internal expansion can easily cause cracks in the cylinder. In mild cases, it makes the engine body more rigid and brittle, leading to reduced power and a shortened engine lifespan; in severe cases, it can cause engine seizure and damage. Hazards of engine overheating: Overheating can lead to decreased engine power, poor acceleration, and increased fuel consumption; it can cause abnormal engine combustion; it can cause lubricating oil to deteriorate and coke, accelerating component wear; it can cause seizure of the crankshaft connecting rod bearings, piston ring breakage, cylinder scoring, and cylinder seizure, shortening the engine lifespan and endangering the rider's safety.

14

5

Share

Is motorcycle oil the same as car oil?

Motorcycle oil is not the same as car oil. The internal structure of the engines differs, leading to different oil requirements. In car engines, the lubrication system is separate for the engine, transmission, and clutch, with oil temperatures in the crankcase typically ranging between 75-90°C. In contrast, motorcycle engines integrate components such as the wet multi-plate clutch, high-speed and transmission gears, shift mechanism, as well as moving parts like pistons, cylinders, and intake/exhaust valves within the same structure, sharing the same oil volume. Below are the key differences: Nature: Motorcycle lubricants generally include motorcycle engine oil (referred to as motorcycle oil), motorcycle gear oil, and motorcycle shock absorber oil. Car lubricants are formulated from hydrocarbons derived from natural gas and crude oil. Classification: Car lubricants are categorized into mineral oils, synthetic oils, and semi-synthetic oils, among others. Motorcycle oils do not follow this classification. Application: Compared to car engines, four-stroke motorcycle engines exhibit significant differences in structure, oil filtration and cooling efficiency, as well as power per liter and intensity. Motorcycle oils particularly emphasize high-temperature resistance, excellent thermal oxidation stability, and low-temperature start-up performance.

6

4

Share

What is the difference between cars from Tianjin Port and those from 4S stores?

Here are the differences between cars from Tianjin Port and those from 4S stores: 1. Different performance: So-called parallel imported cars refer to vehicles purchased directly overseas that meet foreign automobile standards, while imported cars from 4S stores, although labeled as imported, have undergone certain modifications in performance to comply with Chinese automobile regulations, so they cannot be considered completely original imports. Moreover, Tianjin Port offers a very rich variety of car brands and models, covering most automotive products in the overseas market. 2. Different update cycles: Cars from Tianjin Port cover most automotive products in the overseas market, so the update cycle at Tianjin Port is very fast, basically synchronized with the overseas market. Cars from 4S stores must undergo performance modifications to meet Chinese automobile standards before they can be sold in China, so the update cycle at 4S stores is very slow. 3. Different prices: In terms of price, cars from Tianjin Port are significantly cheaper than those from 4S stores, generally 10-20% lower in price.

20

0

Share

How to Deal with Excessive Engine Noise in Vehicles?

Is it normal for the engine to run at high RPM when just started?

How long after failing the driving test can I make a new appointment?

How to Fold Down the Rear Seats in the Lavida Sport?

Can You Pour Water on an Overheated Motorcycle Engine?

Is motorcycle oil the same as car oil?

What is the difference between cars from Tianjin Port and those from 4S stores?

What happens if I don't handle the points deduction in Mofan Car Sharing?

Should a motorcycle start in 1st gear or 2nd gear?

Where is the Renault Fluence's cabin air filter located?

How Often Should Motorcycle Shock Absorber Oil Be Replaced?