How to Deal with Engine Fire While Driving?

1 Answers
McMaddox
07/29/25 3:24pm
In the event of an engine fire while driving, the correct procedure is to immediately turn off the ignition, pull over to the side of the road (avoiding areas with flammable or explosive materials), attempt to extinguish the fire by spraying a fire extinguisher through gaps in the hood, and call emergency services for assistance. If the fire persists for more than three minutes without signs of abating, it indicates that the entire vehicle may be engulfed in flames. For personal safety, evacuate immediately and alert nearby individuals to prevent casualties. Should clothing catch fire during the extinguishing attempt, do not panic or run. Instead, quickly remove the burning garments and use water to douse the flames. Preventive measures to avoid engine fires include: Routine inspections: Regularly check for aging or damaged wiring and promptly address any issues at a repair shop. Vehicles over ten years old are particularly prone to spontaneous combustion and require timely maintenance. Avoid storing flammable or explosive items such as lighters or perfumes in the car, as prolonged exposure to sunlight can lead to explosions and subsequent fires. Additionally, refrain from parking the vehicle in direct sunlight for extended periods; opt for shaded areas or underground parking whenever possible.
Was this review help?
20
1
Share
More Forum Discussions

What is the Difference Between CVT and Tiptronic?

The differences between CVT and Tiptronic are: 1. Different structures: CVT transmissions do not have a clutch; Tiptronic uses an automatic transmission with MT shift mode. 2. Different transmission methods: CVT transmissions rely on two or more specially designed steel belts for power transmission; Tiptronic automatic transmissions use gear transmission. 3. Different fuel consumption: CVT has lower fuel consumption; Tiptronic has higher fuel consumption. CVT is a type of automatic transmission system that can continuously obtain any transmission ratio within the range. Tiptronic combines manual shifting and automatic shifting in one transmission system.
1
2
Share

How Early Can a Vehicle Undergo Its Annual Inspection?

Vehicles can undergo their annual inspection up to 60 days in advance. The inspection process is as follows: 1. Bring your driver's license, ID card, vehicle registration, and valid compulsory traffic insurance policy, and drive the vehicle to the vehicle management office or motor vehicle inspection station; 2. Fill out the annual inspection application form at the vehicle management office, then submit the form and other materials to the staff and pay the inspection fee; 3. After payment, the staff will conduct an exterior inspection of the vehicle. Prepare a fire extinguisher and warning triangle. Once the exterior inspection is completed, proceed immediately to the online inspection. After the online inspection is finished, return to the hall and collect the inspection pass form at the designated window; 4. Take the pass form to the specified window to receive the annual inspection sticker and the environmental inspection pass sticker, completing the inspection process.
13
3
Share

What happens if a car without annual inspection is caught by traffic police?

A car without annual inspection caught by traffic police will result in fines, penalty points, and even vehicle impoundment. Annual inspections cannot be delayed - even a one-day delay will incur fines and a 3-point penalty. If a car without annual inspection is involved in a traffic accident, the insurance company will not provide compensation. Vehicle annual inspection refers to the yearly examination of vehicles that have obtained official license plates and registration certificates, conducted according to the technical requirements for motor vehicle operation safety. The purpose of annual inspection is to check the main technical conditions of the vehicle, urge strengthened maintenance, keep the vehicle in good condition, and ensure driving safety. Motor vehicle annual inspections are divided into initial inspections and regular inspections. The initial inspection is conducted when applying for license plates to verify whether the vehicle meets the requirements for obtaining license plates.
18
2
Share

Does engine oil have an expiration date?

Engine oil does have an expiration date. It cannot be used indefinitely in a continuous cycle. Apart from replenishing due to oil consumption, it also needs to be replaced when it expires. Most car owners frequently check whether the oil level is sufficient but rarely pay attention to whether the oil has expired. This is especially true for those who don't drive often, as they might take a long time to finish a bottle of oil. Therefore, the expiration date of engine oil is an important aspect to consider. The shelf life of engine oil depends on its condition: unopened engine oil can last up to 5 years; leftover oil after a car service has a shelf life of one year; and oil poured into the engine has a shelf life of 6 months.
10
0
Share

How far can you enter Beijing without a Beijing Entry Permit?

Without a Beijing Entry Permit, you can enter areas outside the Sixth Ring Road, but you cannot drive into core built-up areas such as Huairou and Changping. The Beijing Entry Permit is a temporary pass for non-Beijing licensed vehicles to enter within the Sixth Ring Road (excluding) and certain sections outside the Sixth Ring Road. It is valid for 7 days. According to the policy, when applying for a Beijing Entry Permit, you need to provide a driver's license, vehicle registration certificate, ID card, compulsory traffic insurance policy, and a valid vehicle inspection label. However, in practice, only the driver's license, vehicle registration certificate, and ID card are required. The driver's license and ID card must belong to the same person (who does not have to be the vehicle owner), and the ID card holder must apply in person.
5
4
Share

How to Calculate Average Fuel Consumption?

Average fuel consumption is calculated by dividing the actual fuel consumption by the actual distance traveled, i.e., fuel consumption per 100 kilometers equals fuel consumption (liters) divided by distance traveled (kilometers) multiplied by 100. Average fuel consumption refers to the amount of fuel used by a vehicle per unit distance traveled, commonly expressed in liters per 100 kilometers. Fuel consumption per 100 kilometers refers to the average fuel consumption of a car traveling on the road per 100 kilometers. There is also instantaneous fuel consumption, which indicates the fuel consumption at a specific moment. This type of fuel consumption varies greatly, reaching over ten liters per 100 kilometers during acceleration and dropping to five or six liters per 100 kilometers during high-speed cruising.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.