How to Deal with Dried Cement on the Car?

4 Answers
DeIvan
07/28/25 7:28pm
Methods to remove dried cement from the car include: 1. Spray white vinegar on the cement, wait a few seconds, then rinse with water, repeating several times if necessary; 2. Use a specialized cement remover; 3. Wet the car body to soften the cement, then use a wool glove and car wash liquid to wipe or rinse with a high-pressure water gun. Car maintenance methods include: 1. Regularly check tire pressure; 2. Pay attention to tire appearance changes and wear; 3. Regularly clean, maintain, and disinfect; 4. Inspect the chassis to avoid excessive damage from foreign objects; 5. Turn on the ignition before starting the engine, do not start directly; 6. Regularly check the brake pads.
Was this review help?
13
3
Share
JaceLee
08/11/25 11:18pm
Last time I parked my car near a construction site, it got wet cement on it that wasn’t wiped off in time and later dried into a hard shell. I tried using a mix of household white vinegar and water, applying it and waiting about ten minutes for it to soften, then slowly wiped it off with an old towel. For stubborn spots, I used a plastic scraper to gently scrape it off, being careful not to press too hard to avoid scratching the paint. If it’s severe, you can buy a specialized cement cleaner for better results. Remember to rinse thoroughly with clean water afterward and apply some wax to protect the paint. Cement stains are easier to deal with early on; leaving them too long might corrode the car’s surface. It’s best to avoid parking near construction sites to save hassle.
Was this review help?
16
3
Share
Expand All
TravisFitz
09/30/25 5:34am
Got dry cement on your car? I had this annoying experience once. Don't rush to scrape it off, as it may cause scratches. The simplest way is to apply regular vinegar on the stain, let it soften, and then wipe it off. Alternatively, spend a bit on a car cleaner specifically for cement. If that doesn't work well, take it to a car wash where professionals can use tools to remove the buildup—quick and safe. The key is to act promptly; delaying makes the cement more stubborn and may even cause the paint to discolor or turn yellow. That's why I make it a habit to wash my car weekly to prevent such mishaps.
Was this review help?
9
5
Share
Expand All
Freddy
09/30/25 5:36am
Don't panic if you find dry cement on your car. Prioritize safe stain removal and avoid using metal tools to scrape it off to prevent damage. Try softening the stain with vinegar or professional cleaning products, then wipe it away. If you can't handle it yourself, promptly seek professional car washing services to avoid delays that could lead to corrosion issues.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

How to Display Tire Pressure in Lavida?

Lavida's tire pressure monitoring is automatic and will alert if there is any abnormality in tire pressure. Here is additional information: 1. The SET in the new Lavida is the tire pressure monitoring system. When the SET light is on, it indicates abnormal tire pressure, either too high or too low. 2. After changing the tire inflation pressure or replacing the wheels, turn on the ignition, press and hold the SET button of the tire pressure control system until the indicator light on the dashboard comes on. Inflate all tires to the specified pressure, then turn on the ignition. Press and hold the SET button, and the warning light on the instrument panel will illuminate. It will turn off after confirming the storage of the new parameters. 3. The tire pressure monitoring system automatically monitors the tire pressure in real-time while driving and alerts for tire leaks or low pressure to ensure driving safety.
7
3
Share

How to Handle Speeding Less Than 10%?

According to regulations, speeding within 10% of the prescribed speed limit is not subject to penalties but will result in a warning. Relevant details are as follows: 1. Penalty: Speeding between 10% and 20% above the prescribed limit incurs a fine of 50 RMB and 3 demerit points. 2. Overtaking: Vehicles speeding within 10% of the limit face no fines or demerit points. Speeding between 10% and 20% above the limit results in 3 demerit points and a 50 RMB fine. Speeding between 30% and 50% above the limit incurs 6 demerit points and a 100 RMB fine.
14
4
Share

How to Reset the Maintenance Reminder for Toyota Sienna?

Here is the method to reset the Toyota maintenance light: 1. With the ignition switch off, press and hold the "Reset" button. 2. Turn on the ignition switch. 3. Release the "Reset" button and briefly press the "Clock Adjustment" button once. 4. The maintenance cycle display will enter reset mode and return to normal after several seconds. Here is some additional information: 1. The original purpose of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. 2. The quickest and most accurate method to reset the maintenance reminder light is to use a diagnostic tool. Generally, individual car owners do not have such equipment. It is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.
6
3
Share

How to Determine if the Generator is Broken?

Methods to determine if the generator is broken: 1. The charging indicator light on the dashboard will illuminate, and the battery power will deplete quickly; 2. The generator may produce abnormal noises or emit a burnt smell when running; 3. After starting the generator for a few minutes and then turning it off, touch the generator. If it is very hot, it may indicate a short circuit, requiring replacement. The car generator is the main power source of the vehicle, functioning to supply power to all electrical devices (except the starter) and charge the battery when the engine is running normally (above idle speed). Based on the three-phase stator winding of a standard AC generator, additional winding turns and lead-out terminals are added, along with an extra set of three-phase bridge rectifiers. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides the output.
12
4
Share

What Causes Severe Shaking and Jerking When Starting in First Gear?

Severe shaking and jerking when starting in first gear is usually caused by uneven or deformed clutch plates, or improper clutch adjustment. Relevant information is as follows: 1. Issues: Problems with the universal joint bearing or clutch pressure plate contact. Excessive carbon buildup in the engine combustion chamber, leading to incomplete combustion and affected power output. Loose engine mounting bolts, etc. Excluding personal driving habits, shaking during first-gear starts is generally due to excessive wear of the clutch pressure plate. 2. Manual Transmission: Manual transmissions primarily transfer power through the clutch, with the clutch pressure plate responsible for transmitting kinetic energy. The clutch pressure plate has a limited lifespan. Prolonged semi-engagement or the engine operating under excessive load can accelerate wear. When the clutch pressure plate wears to a certain extent, power engagement becomes less smooth, causing the car to shake and the engine speed to become unstable.
15
3
Share

How to Handle the Violation of Passengers Not Wearing Seat Belts?

If the driver fails to use the seat belt as required, a fine of 200 yuan and 2 demerit points will be imposed; if passengers do not fasten their seat belts as required, a fine of 50 yuan will be imposed on the violator. Below is relevant information about wearing seat belts in vehicles: 1. Relevant regulations: According to 'Road Traffic Safety Violation Points Scoring Standards' IV, if a motor vehicle driver commits any of the following violations, 2 points will be deducted; driving a motor vehicle on an expressway or urban expressway without fastening the seat belt as required. 2. Other regulations: 'Road Traffic Safety Law' Article 51: When a motor vehicle is in motion, the driver and passengers shall use seat belts as required, and motorcycle drivers and passengers shall wear safety helmets as required.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.