How to Deal with DPF Overload?

Why does the Mercedes-Benz B200 make a humming noise when running?

The abnormal noise from the Mercedes-Benz B200 while running is related to issues with engine oil, belts, and water temperature. Engine oil aspect: If the engine oil viscosity is too high, it can cause problems with engine operation, reduce lubrication effectiveness, and result in louder engine noise. It is essential to promptly visit a repair shop to check if the engine oil needs replacement. Belt aspect: Check if the belt is loose. A loose belt can lead to increased noise in the engine compartment. Water temperature aspect: Overheating can also cause abnormal engine noise. Check if the temperature gauge is normal and if there is any smoke coming from the engine compartment. Remember to replace the coolant before winter.

12

5

Share

How much oil does the Pajero consume?

Pajero's minimum fuel consumption is 9.63L, and the maximum fuel consumption is 15.59L. Correct time to check oil consumption: After the engine is turned off, let it sit for 15 minutes before checking. If you need to check frequently, you can check before starting the vehicle in the morning, when the oil level is most accurate. Before checking the dipstick, make sure all four wheels are on the same level surface, with no tilting front, back, left, or right. Function of the dipstick: To measure the static height of the oil level. It can reflect whether the engine oil level is within a reasonable range. A conventional dipstick will have upper and lower limits to ensure the oil level is between them. The middle position is best.

10

5

Share

Why do the taillights stay on after the car is turned off?

The reasons why the taillights stay on after the car is turned off are: 1. The car is not locked and is in standby mode, so the lights remain on for a while before automatically turning off; 2. There is a malfunction with the brake switch, in which case you should go to a 4S shop as soon as possible to replace the brake light. The taillights of a car are essentially the brake lights, usually red, designed to provide a highly penetrating light source so that even in low visibility conditions, the vehicle in front can be easily noticed when braking, preventing rear-end collisions. When the taillights are on, it indicates that the car is braking, and they usually turn off when the car is turned off. Car taillights include: turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights.

6

4

Share

How to Check the Production Date of Car Glass and Tires?

To check the production date of car glass and tires, follow these methods: 1. The production date of car glass is indicated by small dots and numbers. The dots represent the production month, and the number represents the production year. If the dots are before the number, it means the production date is in the first half of the year. Subtract the number of dots from 7 to get the month. If the dots are after the number, it means the production date is in the second half of the year. Subtract the number of dots from 13 to get the month. 2. The outer side of car tires will have a DOT mark, and the last four digits of this mark indicate the production date of the tire. Some cars are special, such as BMW, whose glass does not have black dots. If you want to know the production date, you need to enter the serial code on the glass and check it on a specialized website.

16

1

Share

What Are the Common Faults in Vehicle Braking Systems?

Common faults in vehicle braking systems include: 1. The brake pedal does not rise and lacks resistance when pressed; 2. The pedal returns and rises with continuous pressing, improving braking effectiveness; 3. The pedal position is very low; pressing again does not raise the position, and it feels hard; 4. Braking deviation; 5. The brake pedal has too little free travel; 6. Poor braking effectiveness when the brake pedal is fully pressed; 7. The pedal position rises with continuous pressing, accompanied by a sinking sensation; 8. The pedal height is normal, neither soft nor sinking, but braking effectiveness is poor; 9. The brake drum heats up after the vehicle travels a certain distance; 10. Slow recovery of the brake fluid level.

18

3

Share

How to Turn Off ECO Mode in the Levin?

The Levin does not have an ECO mode switch; it can only be turned off by pressing the accelerator hard or switching to S mode. ECO mode primarily functions during vehicle movement by comprehensively analyzing and judging factors that affect fuel consumption, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel quantity to supply the engine, effectively reducing fuel consumption compared to normal driving modes. The Levin is a new sensory compact sedan customized based on Toyota's MC platform. In terms of body dimensions, it measures 4640mm in length, 1780mm in width, and 1455mm in height. The Levin adopts the North American version's styling, with increased lines on the front face compared to the older model, raised front fenders on both sides, and headlights redesigned into a hook shape.

19

3

Share

How to Deal with DPF Overload?

Why does the Mercedes-Benz B200 make a humming noise when running?

How much oil does the Pajero consume?

Why do the taillights stay on after the car is turned off?

How to Check the Production Date of Car Glass and Tires?

What Are the Common Faults in Vehicle Braking Systems?

How to Turn Off ECO Mode in the Levin?

Which country produces the Tank vehicle?

Causes of Slew Bearing Noise

Why is there water dripping from the Lingpai's exhaust pipe?

How to Reset the Maintenance Light on a Chery Car?