How to Deal with Color Difference After Removing Car Stickers?

Should You Press the Clutch When Going Uphill in First Gear?

During the uphill section of the driving test (Subject 2), you should gently lift the clutch to the semi-engaged state to ensure the vehicle moves forward smoothly. It is not necessary to fully release the clutch, so you should press it. Here is some related information: 1. Reverse Parking: This tests the driver's ability to maneuver the car in a confined space. Reverse parking is an assessment point in the driving test, requiring the driver to correctly reverse the vehicle into a parking space from both sides while moving. 2. Parallel Parking: Parallel parking is becoming increasingly common in urban areas, especially as parking spaces in regular lots become more scarce. Many places now designate parking spaces along the sides of streets, known as 'parallel parking spots.'

20

5

Share

What is the difference between DOT3 and DOT4 brake fluid?

The main difference between the two lies in their boiling points. DOT4 performs better than DOT3, especially in high-temperature conditions. The equilibrium reflux boiling point of DOT4 is 230°C, while that of DOT3 is 205°C. Vehicles using DOT4 brake fluid can brake more frequently. Additionally, their compositions differ. Below are the detailed explanations: DOT3 is typically glycol-ether based. The chemical components of glycol-ether are polyglycol or propylene glycol. Polyglycol or propylene glycol has strong hygroscopicity, so its water content gradually increases during use or storage. Since the boiling point of brake fluid decreases as water content rises, its braking performance declines accordingly. If you notice that you need to press the brake pedal harder to stop, a likely reason is that the brake fluid has excessive water content. DOT4 is generally ester-based. Ester-based brake fluid is made by adding a large amount of borate ester to glycol-ether. Borate ester is formed through the esterification reaction of polyglycol or propylene glycol with boric acid. Borate ester has a higher boiling point than polyglycol or propylene glycol, resulting in better braking performance. Borate ester also has strong moisture resistance, as it can decompose absorbed water, thereby slowing the decrease in boiling point caused by water absorption. Therefore, ester-based brake fluid performs better than glycol-ether-based brake fluid but is also more expensive. According to GB12981-2003 "Motor Vehicle Brake Fluid," brake fluids are classified as HZY3, HZY4, and HZY5, corresponding to DOT3, DOT4, and DOT5 internationally. Precautions for using automotive brake fluid: If gasoline, diesel, or engine oil is accidentally mixed into a synthetic brake fluid system, the incompatibility between the fluids can reduce braking effectiveness. For vehicles that have traveled 40,000 kilometers or have used brake fluid continuously for over two years, the brake fluid may deteriorate due to prolonged use, so timely replacement is essential. For vehicles equipped with a brake fluid level warning device, always monitor whether the warning light is flashing and whether the sensor is functioning properly. When the brake fluid is low, it should be replenished promptly. The stored brake fluid should be kept between the marked minimum and maximum capacity levels. If the braking feels inconsistent during normal driving, the brake fluid should be replaced immediately. Before replacement, clean the braking system with alcohol. If the vehicle pulls to one side during braking, conduct a comprehensive inspection of the braking system. If the wheel cylinder rubber cup is excessively swollen, it may indicate poor-quality brake fluid. In this case, replace it with high-quality brake fluid and change the rubber cup as well. During seasonal changes, especially in winter, if braking performance declines, the brake fluid grade may not be suitable for winter conditions. When replacing the brake fluid, choose one with lower viscosity at low temperatures. Do not mix different types or brands of brake fluid. For braking systems with special requirements, use the specified brand of brake fluid. Since different brands and types of brake fluid have varying formulations, mixing them can degrade performance. Even if some brands claim compatibility or substitutability, their performance may still be unsatisfactory, so avoid long-term use of mixed brake fluids. If water is mixed into or absorbed by the brake fluid, or if impurities or sediments are found, replace or thoroughly filter the brake fluid immediately. Otherwise, it may lead to insufficient braking pressure and affect braking performance. Regularly replace brake fluid: The volume of brake fluid changes with temperature, so the brake fluid reservoir has a vent hole. The air drawn in through this hole contains moisture or impurities, which can be absorbed or dissolved by the brake fluid, lowering its boiling point. During prolonged braking, the temperature of the braking system rises, increasing the risk of vapor lock in the brake lines. Compressed air can reduce braking force or cause brake failure. For driving safety, brake fluid must be replaced regularly.

15

4

Share

What Causes the Insensitive Response of the Passat One-Button Start?

Passat one-button start may be unresponsive due to poor signal reception. The specific reasons are as follows: 1. Signal Interference: Frequently placing the car key near electronic devices such as mobile phones, computers, or televisions can interfere with the low-intensity radio waves in the key. Additionally, strong radio waves from nearby sources like TV towers, airports, or power plants can cause the one-button start to malfunction. 2. Key Fob Battery Depletion: If the key exhibits symptoms like reduced remote control distance or decreased sensitivity, it may be a sign that the key fob battery is running low. When the battery is depleted, the one-button start function will not operate properly, and the battery should be replaced as soon as possible.

2

5

Share

Does Crossing the Line with the Front of the Car During Parallel Parking Result in Penalty Points?

Crossing the line during parallel parking does not result in penalty points. Below are some related tips for parallel parking: 1. Practical Application: The 12-character mantra for parallel parking: Accurate estimation, quick steering, and stable driving. After stabilizing the car, turn the steering wheel one and a half turns to the right, then slowly release the clutch to let the car reverse. 2. Parking Tips: Before moving into the parking space, ensure the car is positioned close to the left line of the parking space. Adjust both side mirrors—the left mirror should be lowered enough to see the left rear wheel, and the right mirror should show the car's body. Adjust the interior rearview mirror so that when you look up, you can see the middle of the rear windshield.

19

2

Share

Will the vehicle be transferred after repaying the loan on Maodou New Car?

If you want to transfer the ownership of a vehicle purchased on Maodou New Car Network with a 48-month installment plan, you need to wait until the lease period reaches 12 months and all payments are fully settled. Additionally, all traffic violations related to the purchased vehicle must be resolved before the transfer can proceed. When processing the transfer, you will need to bring the purchase contract, the owner's ID card, driver's license, and other required documents, and follow the customer service instructions. More details are as follows: 1. Introduction: Maodou New Car is a platform that adopts a "lease-to-own" car purchase model. It is quite reputable and widely recognized. This "lease-to-own" model can promote the development of the automotive industry and alleviate consumers' financial pressure when buying a car. It allows consumers to enjoy the vehicle by paying a small initial amount, enabling more people to own a car. 2. Note: The "lease-to-own" model requires leasing the car first, and the ownership can only be transferred after one year of leasing. This means that during the lease period, the vehicle's ownership does not belong to the buyer but to Maodou New Car Network Co., Ltd. Additionally, this "lease-to-own" model involves certain interest charges, so the total cost of the vehicle is often higher than purchasing the same model outright at a 4S store.

8

1

Share

How long after getting a driver's license can you drive on highways?

You can drive on highways immediately after obtaining a license, but must be accompanied by a driver who has held a license for the same or higher vehicle category for at least three years. Here are specific details about the driving test process: 1. Test sequence: The examination proceeds sequentially through Subject 1, Subject 2, Subject 3, and Subject 4. 2. Retakes: For Subject 2 and Subject 3, candidates can only take each test five times. If they fail, they must repay tuition and practice fees. According to Ministry of Public Security Orders No. 123 and 124, if a candidate fails the fifth scheduled attempt for either Subject 2 or Subject 3 road driving skills test, all previously passed subjects become invalid. To obtain a license, the candidate must re-enroll and pay tuition fees again.

18

4

Share

How to Deal with Color Difference After Removing Car Stickers?

Should You Press the Clutch When Going Uphill in First Gear?

What is the difference between DOT3 and DOT4 brake fluid?

What Causes the Insensitive Response of the Passat One-Button Start?

Does Crossing the Line with the Front of the Car During Parallel Parking Result in Penalty Points?

Will the vehicle be transferred after repaying the loan on Maodou New Car?

How long after getting a driver's license can you drive on highways?

Is Neutral Gear P or N?

How to Check the Production Date on a Tire?

What does base model mean?

Should You Shift to N or P Gear at a Red Light?