How to Deal with Code95 Buick Fault Code?
2 Answers
code59 Buick fault code means: Please initialize the driver's window. Solutions for code59 Buick fault code: Close the door, turn on the ignition switch, fully close the window, then continue holding the window close button for more than 2 seconds, and perform the same operation for other windows. Reasons for incorrect fault codes: After reading the fault code, sometimes you may find that the fault indicated by the code is completely unrelated to the actual fault of the car. In this case, you can consider the fault code display to be incorrect and not pay too much attention to it. The reasons for this situation are: First, the original fault code was not effectively cleared during the last repair; Second, during engine operation, the maintenance personnel intentionally or unintentionally disconnected the wiring connector of the relevant sensor.
I was really confused when I encountered the Buick code 95 fault last time, so I quickly checked the relevant information. This code usually indicates a problem with the engine coolant temperature sensor. A faulty sensor can cause the car to misjudge the cooling status, potentially leading to engine overheating or performance degradation. Safety first—I immediately pulled over to check if the temperature gauge was normal; if it was too high, I had to turn off the engine and wait for it to cool down. I recommend that car owners not panic. First, borrow an OBD-II scanner and plug it into the port under the dashboard to read the exact code description. If you don't have a scanner, try restarting the vehicle—sometimes it's a temporary false alarm. If the light stays on, don't tamper with the wiring yourself. Instead, contact a professional repair shop to inspect the sensor or circuit to avoid turning a minor issue into a major fault. If the cost isn't too high, replacing the sensor with a new one should solve the problem.
