How to Deal with Car Window Not Rolling Up?
2 Answers
Methods to handle a car window that won't roll up are as follows: 1. Reset the window lifting system: Turn on the ignition, pull and hold the switch to raise the window. After the window reaches the top, continue holding for more than 3 seconds. Release the switch and immediately press and hold it again to lower the window to the bottom for more than 3 seconds. Repeat the above steps once more to complete the initialization process and restore the window lifting function. 2. Clean dirt from the window guide channel: Insert a chopstick wrapped with a damp towel into the guide channel. Adjust the number of towel layers wrapped around the chopstick according to the channel's width for moderate thickness. Move the chopstick up and down forcefully inside the channel to clean, and continuously remove the towel to wash away the dirt until no more dirt can be cleaned. 3. Replace the window lift switch directly: If steps 1 and 2 do not solve the problem, it indicates an issue with the window lift switch, which needs to be replaced.
When my car window suddenly wouldn't roll up while driving, I got a bit panicked. First, check the basic steps: turn off the engine for safety, then test if the switch responds. If the switch works but the window doesn't move, inspect the fuse box, which might be on the driver's side or in the engine compartment. Find the window fuse and see if it's blown, then replace it. Sometimes dust or debris in the tracks can cause jamming—try gently pressing the glass while rolling up the window. If that doesn't work, it might be a damaged motor or a short circuit. Avoid disassembling randomly to prevent further damage. It's best to stop and check—safety first—and avoid operating at high speeds. Regularly clean the tracks before the rainy season to prevent sticking.
