How to Deal with Car Sunroof Leakage?

2 Answers
SanHailey
07/28/25 9:51pm
Turn on the vehicle's ignition and then press the sunroof switch button to open the sunroof. The first step is to observe the car's sunroof. You can find a drainage outlet on the sunroof track, one on each side. The task is to pour water into these drainage outlets, ensuring both sides are filled. Check if water flows out from the front fender liner. If water is seen flowing out from the fender liner near the front wheels, it indicates that the sunroof drainage pipe is clear. This is part of sunroof maintenance. With frequent summer rains, regular cleaning is beneficial for the vehicle. Use a towel to wipe away dust and, ideally, use an air hose to clean the sunroof drainage outlets. For sunroof care, this step is essential: apply a small amount of lubricant to the sunroof tracks and then use a screwdriver to spread it evenly.
Was this review help?
19
2
Share
HarrisonAnn
08/12/25 2:27am
After driving for so many years, the most annoying thing is a leaking sunroof. Actually, it's not difficult to handle it yourself. First, fully open the sunroof and carefully check if the drainage channels are blocked by leaves or mud. Use a damp cloth to thoroughly clean the tracks. The drainage holes are usually located at the four corners; use a thin wire or bicycle brake cable to gently unclog them, but don’t push too hard to avoid puncturing the hose. Aging seals are also common—if they feel hard or cracked to the touch, it's time to replace them. You can buy new seals online for around a hundred bucks. When parking, try to avoid spots under trees, and clean the tracks every quarter. Remember to ask the car wash staff to flush the drainage holes. Once, I neglected it for half a year, and the leaked water soaked the headliner, costing me over a thousand to fix—totally not worth it.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What is the reason for the turn signal not working in Hafei Saibao?

Hafei Saibao turn signal not working reasons are as follows: Relay failure: First, check whether the live wire terminal of the flasher relay has power. If there is no power, check whether the line to the power supply is open. If there is power, use a screwdriver to connect the two terminals of the flasher relay. If the turn signal lights up, it indicates that the flasher relay is faulty and should be replaced promptly. Turn switch failure: If the contact gap is too large, it should be adjusted. If the turn signal does not light up when the movable contact is pressed and the contact is closed, you can use a screwdriver to short-circuit the contact. If the light turns on, it indicates that the contact is oxidized. If the turn signal still does not light up, the turn switch may be faulty. Use a screwdriver to connect the live wire of the turn switch to the left and right light wire terminals separately. If the light turns on, it means the turn switch is faulty and should be removed for repair or replacement.
13
2
Share

What is the Sienna maintenance reminder?

Sienna maintenance reminder is a small yellow wrench light that illuminates to alert the driver that maintenance is required. Vehicle body maintenance content: Vehicle body maintenance is commonly referred to as automotive detailing. It mainly includes paint maintenance, seat cushion and carpet maintenance, bumper and side skirt maintenance, dashboard maintenance, electroplating maintenance, leather and plastic maintenance, tire and wheel hub maintenance, windshield maintenance, chassis maintenance, engine exterior maintenance, etc. Interior maintenance content: The purpose of interior maintenance is to ensure the vehicle can travel hundreds of thousands of kilometers without major repairs, keeping the car in optimal technical condition. It mainly includes lubrication system, fuel system, cooling system, brake system, and carburetor (fuel injector) maintenance, etc.
12
5
Share

What is the displacement of the BMW 730?

BMW 730 has a displacement of 3.0 liters. The BMW 730 is a high-end luxury sedan produced by the German BMW company. Introduction to displacement: Displacement (Swept volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy of fuel into mechanical energy) per unit time, which translates to better "power performance". Displacement calculation method: Combustion chamber: the volume between the top of the piston at top dead center and the cylinder head. Total cylinder volume: the volume between the top of the piston at bottom dead center and the cylinder head. Engine displacement: the sum of the displacements of all cylinders in an engine is called the engine displacement. Vst=Vsi=(VstL-displacement, i-number of cylinders, D-cylinder diameter in mm, S-piston stroke).
12
1
Share

How many oil pressure sensors does the Passat Lingyu have?

Passat Lingyu has 2 oil pressure sensors, one located at a high position and the other at a low position. Function of oil pressure sensors: The oil pressure sensor provides signals to the oil pressure gauge, monitors oil pressure, and sends an alarm signal when the pressure is insufficient. When oil pressure is low, the oil light on the dashboard will illuminate. Common causes of low oil pressure alarms include sensor failure, insufficient oil, clogged oil pump filter screen, or oil pump damage. Location of oil pressure sensors: Oil pressure sensors are typically located near the oil filter. Most vehicles have only one sensor, but some models may have two—one on the engine block and another on the cylinder head. A faulty sensor may result in oil pressure alarms, constant illumination or non-illumination of the oil indicator light, or false alarms.
10
4
Share

What Causes Black Smoke from Audi Q7?

Audi Q7 emits black smoke for the following reasons: Engine Overload: Such as excessive vehicle load, high engine speed in low gear, or the use of large electrical equipment in the car. Insufficient Cylinder Pressure: Possible air leakage, such as misaligned piston rings or inaccurate valve timing. Individual Cylinder Misfire: Delayed ignition, which could be due to faulty spark plugs or issues with ignition timing control. Clogged Air Filter: Causes insufficient air intake and overly rich fuel mixture, though this is less likely. Blocked Exhaust System: Increased exhaust resistance, possibly due to excessive carbon buildup in the muffler.
6
3
Share

Is the Volkswagen CC equipped with an AT transmission?

Volkswagen CC does not use an AT transmission; it is equipped with a 6-speed dual-clutch transmission. 1.8L TSI EA888 engine: The main bearing diameter is reduced from 58mm to 52mm, with improvements to the piston, piston rings, and fuel supply lines, adopting different honing processes, a self-regulating oil pump, vacuum pump, and EA113 turbocharger control lever. 2.0L TSI EA888 engine: Improvements to the piston, piston rings, and fuel supply lines, adopting different honing processes, a self-regulating oil pump, vacuum pump, Hitachi third-generation high-pressure pump, and a new air flow meter (the intake temperature sensor is eliminated, with only 3 wires).
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.