How to Deal with Car Shaking When Accelerating?

1 Answers
MacAdeline
07/29/25 12:17pm
Here are the methods to handle car shaking when accelerating: 1. Inspect car components: Clean the throttle body and check the spark plugs, replacing them if necessary. 2. Wheel alignment and balancing: Car shaking indicates a weight imbalance between the tires and rims, so wheel alignment and balancing should be performed based on the actual situation. 3. Change the engine oil: Using inappropriate engine oil can also cause vibrations, such as overdue oil changes or excessive carbon buildup from prolonged low-speed driving. The reasons for car shaking are as follows: 1. Incomplete fuel combustion; 2. Severe engine carbon deposits; 3. Tire pressure being too high or too low.
Was this review help?
3
3
Share
More Forum Discussions

What does SUV type vehicle mean?

S∪V type vehicle stands for Sport Utility Vehicle. SUV models have the following advantages: High chassis: SUV models feature a high chassis, which results in higher bumpers and crash bars. Therefore, when a collision occurs, the bumper and crash bar can effectively absorb collision energy, thereby reducing vehicle damage. Spacious interior: Vehicles offering more space at the same price are more popular. This is because larger space provides better comfort and carrying capacity, along with incomparable advantages when loading large items compared to smaller vehicles. Wide field of vision: Compared to sedans, SUV models offer a wider field of vision, providing drivers with a better operating experience.
4
5
Share

How to open the fuel cap of the old GL8?

The method to open the fuel cap of the old GL8 is: locate the switch under the driver's seat in the main cabin, and pull it outward with your hand to open the fuel tank cap. Taking the 2021 GL8 as an example, its body dimensions are: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, and fuel tank capacity 66L. The 2021 GL8 is equipped with a 2.0T turbocharged engine, with a maximum power of 174kW and a maximum torque of 350Nm, paired with a 9-speed automatic transmission. It adopts a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension.
8
2
Share

What is the fuel consumption of the MG 3?

The fuel consumption of the MG 3 is approximately 8L/100KM. Factors affecting fuel consumption: The driver's driving habits, road conditions, the weight of items placed in the car, whether the air conditioning is on, and whether the vehicle is in the break-in period, among other factors, can all affect the vehicle's fuel consumption. Methods to reduce fuel consumption: Avoid sudden acceleration and sudden deceleration while driving; make as much use as possible of the car's inertia and reduce unnecessary braking; use cruise control correctly; use the air conditioning cooling system rationally; reduce the vehicle's weight by promptly removing unnecessary items and mud from the chassis to lighten the load.
8
1
Share

Does Throttle Body Cleaning Require Matching?

After cleaning the throttle body, matching is necessary. Failure to match can lead to the following consequences: Short-term increase in vehicle fuel consumption: If the throttle body is cleaned but the computer is not matched, the system will continue to use the control logic for a throttle body with carbon deposits to manage a clean throttle body. This will result in a short-term increase in fuel consumption. Over time, carbon deposits will form on the throttle body, affecting engine performance. Unstable idle speed: If the throttle body is not matched after cleaning, it usually results in a high idle speed, and in some cases, an unstable idle. An excessively high idle speed can also trigger the engine warning light, making normal driving impossible. The vehicle may accelerate rapidly without pressing the accelerator.
9
4
Share

How Often Should the Timing Belt on a Citroen C4 be Replaced?

The timing belt on a Citroen C4 should be replaced every 90,000 kilometers. The timing belt is a crucial component of the engine's valve timing system. As a rubber part, its functions include: 1. Ensuring accurate intake and exhaust timing; 2. Synchronizing the engine's ignition with the movement of the cylinders; 3. Guaranteeing smooth power output from the engine. Taking the 2016 Citroen C4 as an example, its body dimensions are 4588mm in length, 1773mm in width, and 1486mm in height, with a wheelbase of 2610mm. The 2016 Citroen C4 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86kW at 6000 rpm.
9
5
Share

What are the reasons for motorcycles being difficult to start in cold weather?

The reasons for motorcycles being difficult to start in cold weather are: 1. Fuel aspect: In cold weather, the temperature of gasoline drops significantly, making it difficult for gasoline to vaporize in the carburetor, resulting in too little gasoline in the air-fuel mixture and making the mixture too lean; 2. Lubricating oil aspect: As the temperature decreases, the viscosity of lubricating oil increases, its fluidity deteriorates, and the engine starting resistance increases; 3. Current aspect: The viscosity of the electrolyte in the battery increases, and its fluidity and diffusivity deteriorate. The solutions for motorcycles being difficult to start are: 1. Check the carburetor, fuel mixture ratio, oil level, and choke; 2. Check if the valve clearance is too small or if there is air leakage; 3. Check if the high-voltage spark for ignition is strong; 4. Open the choke to force start.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.