How to Deal with Car Rust?

1 Answers
StElliana
07/25/25 2:16pm
Use ultra-fine water sandpaper dipped in water to gently sand away the rust, but avoid random sanding without direction. Sand in straight lines in the same direction. After completely cleaning it, apply a layer of primer. The vehicle's underside can undergo chassis armor or sealing treatment to protect the chassis from acid rain and corrosion, preventing the original protective layer from cracking or peeling. Continuous braking while driving can help remove rust. If the rust is severe, it's necessary to visit a repair shop to have the brake discs removed and sanded to eliminate the rust. Regular inspections are recommended. Frequently air out the carpets or place some desiccants in the trunk.
Was this review help?
13
2
Share
More Forum Discussions

Should You Turn Off the Air Conditioning Before Shutting Down an Automatic Transmission Car?

It is essential to turn off the air conditioning before shutting down the car. If the air conditioning is not turned off before shutdown, the vehicle will start with the pressure of the air conditioning system during the next ignition, which can easily cause damage to the engine and battery, while also shortening their service life. Below is an introduction to related content: Advantages of turning off the air conditioning before shutdown: Turning off the air conditioning 7 minutes before shutdown allows the remaining warm air to dry the moisture inside the evaporator, eliminating the temperature difference with the outside environment. This can relatively reduce odors in the air conditioning system and maintain its relative dryness. Turning off the air conditioning a few minutes before shutdown and shutting down all lights and electrical equipment before turning off the engine can extend the service life of your car's components through proper usage methods. Disadvantages of not turning off the air conditioning before shutdown: This can make the evaporator damp, leading to the proliferation of mold inside the air conditioning system, causing unpleasant odors and making the air inside the cabin turbid, which can affect the health of the car owner.
15
1
Share

What is the function of the S gear +/- in an automatic transmission?

The function of the S gear +/- in an automatic transmission is to adjust the speed when going uphill or downhill using these two buttons. The +/- represents gear adjustment: pressing + shifts the gear up, while pressing - shifts the gear down. Below is an introduction to related content: Advantages of S gear: In S gear (Sport mode), the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period. This allows the car to operate at a lower gear with higher RPM for an extended time, resulting in greater torque output and acceleration. This low-gear, high-RPM approach gives the driver a noticeable sense of the car's pushback, making it easier to handle both speed changes and overtaking. Function of S gear: When descending a long slope, especially if the gradient is steep, it is recommended to use S gear to utilize engine braking, preventing the wheel brakes from overheating and reducing braking efficiency. When climbing a slope, using S gear can provide more power for the ascent.
4
3
Share

What Causes the Clicking Noise When Starting an Automatic Transmission Car?

Automatic transmission cars produce a clicking noise when starting due to internal transmission issues and excessively low engine RPM. Internal transmission problems: Excessive wear creates gaps, resulting in play during startup that causes the clicking noise. Excessively low engine RPM: Insufficient output torque can cause gear dragging, which may also produce abnormal sounds. During rapid acceleration when engine RPM rises extremely quickly, the transmission generates an impact when shifting from 1st to 2nd gear. When heavily depressing the accelerator to raise RPM to 5,000-6,000 or higher, the transmission must suddenly reduce this high RPM to 2,000-3,000 through gear shifting to stabilize engine speed, creating impact during this process. Maintenance methods: Replace transmission fluid and perform comprehensive transmission maintenance. Additionally, avoid aggressive daily driving to prevent accelerated transmission wear. Another important note: regardless of gear shifting operations, always ensure the vehicle is completely stopped using the foot brake first.
10
0
Share

Is Tesla Charging AC or DC?

Tesla charging uses alternating current (AC). You can plug the power adapter directly into a home AC outlet for charging, though the charging speed will be slower, it's more convenient. Tesla offers three charging methods: one utilizes a standard AC power source for charging, another employs a high-efficiency charger, and the third involves charging at Tesla's established Supercharger stations. Using a home AC outlet with a power adapter allows for direct charging, albeit at a slower speed, but it offers greater convenience. The high-efficiency charger provides slightly faster charging compared to standard AC power sources, while Supercharger stations enable rapid charging. However, this depends on the distribution of charging stations, which can be limiting. Using a household 110V power source, a Model S can charge enough per hour to travel 31 miles (50 kilometers). Owners can also opt for a high-efficiency charger, which doubles the charging speed. Tesla has installed high-efficiency charging stations in parking lots of major shopping centers across the U.S., where Tesla owners can charge for free. Supercharger stations utilize solar energy for charging, providing enough charge per hour for up to 300 miles (480 kilometers) of travel.
13
5
Share

What does the P indicator mean on a vehicle?

When the dashboard displays a P, it indicates that the parking brake is engaged. The parking brake, commonly referred to as the handbrake, is a manually operated brake installed in motor vehicles to stabilize the vehicle after it has come to a stop, preventing accidents caused by rolling on inclined surfaces. Below is a detailed introduction to the parking brake: 1. The working principle of the parking brake involves a mechanical handbrake that connects to the rear wheel brake calipers via a steel cable or similar mechanism. When the handbrake is pulled, the calipers press against the brake pads, achieving the parking function. An electronic parking brake operates by activating the parking switch, which engages a motor to drive the steel cable or similar mechanism, pressing the calipers against the brake pads to achieve the parking function. 2. Parking brakes are categorized by operation method into two types: hand-operated parking brakes and foot-operated parking brakes. By control method, they are divided into two types: mechanically controlled parking brakes and electronically controlled parking brakes. To engage the parking brake, press the brake pedal down and pull the parking brake lever all the way up. To release the parking brake, press the brake pedal down, slightly pull the parking brake lever up, press the button on the handle with your thumb, and then lower the parking brake lever back to its original position.
3
1
Share

Which gear should an automatic transmission car use when going down a long slope?

When going down a long slope with an automatic transmission car, if the car has an L gear, choose to use the L gear. If there is no L gear, then select the S gear, which is available in most automatic transmission cars. Here is the relevant content introduction: Reasons for choosing L gear: This gear is a low-speed gear. After engaging it, the car will automatically maintain a low-speed state, and the car will not accelerate automatically even if the driver steadily presses the accelerator. Reasons for choosing S gear: Its principle is to allow the car to use engine speed to reduce the vehicle speed. The speed and engine speed will not rise too high, and if the engine speed does not increase, the computer program will not choose to shift up. Precautions: Never keep the car in D gear when going down a long slope, especially on roads with continuous ups and downs in many places, as it is quite dangerous to descend in D gear continuously. Because D gear is a forward gear, if you use D gear to go downhill, even if the driver steadily presses the accelerator, the car's speed will continue to increase. In this case, the driver will inevitably need to continuously apply the brakes to slow down, which can easily lead to overheating of the brake pads and brake failure during the process.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.