How to deal with bubbles after applying front windshield film?

How to Replace the Fuel Filter of JAC Refine S3?

Replacement method for the fuel filter of JAC Refine S3 is as follows: 1. First, locate the position of the fuel filter, which is inside the fuel tank; 2. When replacing, open the fuel tank cap and remove the fuel pump bearing; 3. Remove the old fuel filter, replace it with a new one, and then reassemble and reinstall it. Below is relevant information about the fuel filter: 1. The main function of the fuel filter is to remove impurities from the gasoline. 2. Fuel filters are divided into carburetor type and electronic injection type. For gasoline engines using a carburetor, the fuel filter is located on the inlet side of the fuel pump, with lower working pressure, usually featuring a nylon shell; for electronic injection engines, the fuel filter is located on the outlet side of the fuel pump, with higher working pressure, typically featuring a metal shell. 3. The filter element of the fuel filter is mostly made of filter paper, but there are also fuel filters using nylon cloth or polymer materials.

16

5

Share

What model of tires does the Changan CS35 use?

The Changan CS35 uses tires with the specification 215/50/R17. Any tires that meet this size specification can be used. The advantages of this tire model: The greatest advantage is not its wear resistance, but its balance in noise reduction, grip, and fuel efficiency, offering very high cost performance. Below is relevant information about tires: 1. Tires are rubber products, and rubber products will age and wear over time, so tires need to be replaced regularly. If not replaced for a long time, it will affect the driving stability and safety of the vehicle. Under normal circumstances, car tires should be replaced every four years. 2. When purchasing new tires, always check the production date, as tires generally have a shelf life. Normally, the shelf life of stored tires is three years. If the tires have been in storage for more than three years, do not purchase them.

18

3

Share

Should the Golf use 92 or 95 octane gasoline?

The Golf 1.2T, 1.4T, and 2.0T turbocharged engines are recommended to use 95 octane gasoline, while the 1.6L naturally aspirated engine is recommended to use 92 octane gasoline. Relevant information about gasoline octane ratings is as follows: 1. The gasoline octane rating refers to the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the octane rating, the stronger the anti-knock performance. Standard gasoline is composed of isooctane and n-heptane. Higher octane ratings are not necessarily better; the appropriate gasoline octane rating should be selected based on the engine's compression ratio. 2. There is essentially no difference in quality between 92 and 95 octane gasoline, as neither contains fuel impurities. The difference in octane ratings is due to the varying proportions of their internal components, specifically the differing content of n-heptane and isooctane.

13

0

Share

Can I Add Water If There Is No Antifreeze?

You can add water if there is no antifreeze. The water added can only be purified water or distilled water. If tap water, well water, or mineral water is added, due to the hardness of the water, it is easy to produce scale blockage and corrode the machine's cooling pipes after high temperatures. Methods to determine if antifreeze is lacking: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to a lack of antifreeze, although it could also be caused by excessively high temperature in the cylinder. Check the antifreeze reservoir. If the liquid level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the water level scale mark on the antifreeze bottle. Normally, antifreeze should be between the maximum and minimum water levels. Whether antifreeze is lacking depends on the scale. If the antifreeze is below the minimum water level, it indicates a lack of antifreeze.

12

2

Share

How to Find the Semi-Engagement Point of a Car Clutch?

Here are the methods to find the semi-engagement point of a car clutch: 1. Listen for changes in engine sound: When the engine is under no load, the sound is relatively relaxed. If a load is applied, i.e., when the clutch is lifted to the point where power transmission begins, the engine sound starts to become deeper, especially noticeable under heavier car loads. 2. Feel the engine vibration: When the clutch is lifted to the semi-engagement position, the car will transition from stationary to moving with a slight vibration. Placing your hands lightly on the steering wheel makes it easy to detect this vibration. At this point, the clutch is precisely at the semi-engagement position. 3. Rely on foot sensation: As the engine sound begins to change and the vehicle experiences slight vibrations, the clutch pedal will give a slight push-back feeling. This indicates the clutch is in the semi-engagement state. 4. Observe the tachometer: Watch the engine tachometer during the clutch lifting process. If the RPM drops noticeably, it confirms the clutch has reached the semi-engagement position. 5. Sense the vehicle's forward momentum: When the clutch is lifted to the semi-engagement position, the car will have a slight forward surge, indicating the clutch is in the semi-engagement state.

4

0

Share

Can a motorcycle still undergo annual inspection after 13 years of use?

Motorcycles that have been in use for 13 years should be scrapped or undergo regular vehicle inspections after extending their service life. Documents required for motorcycle annual inspection: "Motor Vehicle License Plate Application Form", motor vehicle driving license, motor vehicle traffic accident compulsory insurance certificate, motor vehicle safety technical inspection qualified certificate issued by a motor vehicle safety technical inspection institution, motor vehicle inspection record form. For motor vehicles subject to deferred inspection, the "Motor Vehicle Deferred Scrapping Approval Form" must also be submitted when issuing the motor vehicle safety technical inspection qualified mark for the first time this year. Motorcycle annual inspection extension regulations: Motorcycle annual inspection can only be advanced by 90 days and cannot be delayed. If the motorcycle driving license annual inspection is overdue, a fine will be imposed plus three points deducted. The motorcycle driving license does not need to be reviewed and can be renewed upon expiration. There is no fine for unverified driving licenses, and driving licenses can undergo supplementary inspection. During the inspection, previous violation records of the motorcycle must be processed, compulsory vehicle insurance must be paid, and overdue annual inspection fines must be settled. At the same time, the original driving license, original and photocopy of the resident ID card, etc., must be brought to the vehicle management department for processing.

9

1

Share

How to deal with bubbles after applying front windshield film?

How to Replace the Fuel Filter of JAC Refine S3?

What model of tires does the Changan CS35 use?

Should the Golf use 92 or 95 octane gasoline?

Can I Add Water If There Is No Antifreeze?

How to Find the Semi-Engagement Point of a Car Clutch?

Can a motorcycle still undergo annual inspection after 13 years of use?

Where is the Pajero Sensor Located?

At how many kilometers does the timing chain of the New Transit need to be replaced?

Why can a motorcycle only reach 80 km/h?

What is checked during the annual vehicle safety inspection?