How to Deal with Brake Pad Rust?

1 Answers
LaLucille
07/29/25 8:07pm
You can use the method of continuous braking while driving to remove it. While driving, gently press the brake to let the friction between the brake pads and the brake disc 'polish' the surface. Drive the vehicle into the repair shop, remove the brake disc, and use sandpaper to grind off the rust. After proper installation, conduct a road test.
Was this review help?
19
2
Share
More Forum Discussions

What to Do When a Car Has Difficulty Starting in Cold Winter?

Difficulty starting a cold car in winter can be addressed by switching to engine oil suitable for winter use. Additional information is as follows: 1. Reasons for difficulty starting a cold car in winter: The main reason is the low temperature, which increases the viscosity of the engine oil, resulting in relatively poor fluidity. This increases engine resistance, making it harder to start the engine. 2. Other considerations: Car owners should check the freezing point of the antifreeze. The liquid freezing point of the antifreeze should be 5 to 10°C lower than the lowest temperature of the vehicle's operating area. Note that the antifreeze level should generally be about 10 millimeters below the radiator filler opening. Additionally, check the battery voltage. Inspection method: With the engine at normal temperature and the starter in good condition, if the engine starts smoothly several times in a row, it indicates the battery is in good condition with normal voltage. If each start results in a gradual decrease in engine speed, or if the engine barely starts, it indicates the battery voltage is in a depleted state and should be charged.
4
3
Share

What are the effects of high mileage on a car?

High mileage affects the lifespan of components such as the engine, chassis suspension, and transmission. Naturally, increased usage leads to more significant wear and tear. Adhesive wear is related to material plasticity (higher plasticity increases susceptibility), working conditions (temperature, pressure, speed, lubrication), and surface roughness. Below is an introduction to car maintenance: 1. Exterior inspection: Before driving, check the doors, hood, trunk, and glass condition. Inspect for body damage, tilting, oil or water leaks. 2. Engine and fluids: Check the fastening of engine components and inspect for oil or coolant leaks at joints. Adjust belt tension and inspect the securing of hoses and wiring. Top up engine oil, coolant, and battery electrolyte as needed. 3. Tires: Check tire wear and clean the trunk. Replace tires when tread approaches the wear indicators. Inspect for bulges, abnormal wear, aging cracks, or damage. 4. Cleaning and lubrication: Clean and lubricate hinges on the hood, doors, and trunk. Antifreeze typically lasts 2 years—replace it during maintenance and thoroughly flush the cooling system. Due to brake fluid's hygroscopic nature, replace it every two years.
5
3
Share

What are the differences between the Hyundai ix25 and the KAMIQ GT?

The differences between the Hyundai ix25 and the KAMIQ GT are as follows: 1. KAMIQ GT: The KAMIQ GT features a front bumper with a continuous design that visually widens the front end. The air vents on both sides of the front bumper are not just decorative; they help cool the tires and brake discs while also optimizing airflow from an aerodynamic perspective. Although the side lines of the KAMIQ GT are not overly complex, the waistline and skirt lines significantly enhance the sense of layering on the sides. The model adopts a rare floating two-tone roof and chrome-plated D-pillar, creating a striking visual contrast. Combined with a variety of color options, this car is sure to turn heads on the road. 2. IX25: The new IX25 adopts Hyundai's latest family design. The previous generation IX25 struggled in the domestic market due to its appearance and brand appeal. However, the new generation IX25 still features a bold exterior design, incorporating Hyundai's latest design language, which bears a strong resemblance to the larger Palisade. The large front grille paired with split-type headlights gives it high recognition, though its unconventional design has sparked considerable debate, with many consumers expressing difficulty in accepting its appearance.
19
2
Share

What Are the Symptoms of a Damaged Outer CV Joint in a Car?

Here are the detailed symptoms of a damaged CV joint in a car: 1. Regular abnormal noises: If the CV joint is damaged, there will be regular "clicking" noises when turning or driving over bumps. In severe cases, the car may even lose power. The "clicking" sound during turning is usually due to a damaged outer CV joint, though the inner CV joint could also be the cause, but the outer CV joint is more likely. The "clicking" sound over bumps is typically caused by a damaged inner CV joint. In fact, the inner CV joint will also make noise when driving straight after being damaged. 2. Slight front wheel vibration during acceleration: In most cases of CV joint damage, the "clicking" noise occurs when the car is accelerating and "exerting force," and rarely happens when coasting. You can intermittently accelerate and release the throttle to feel if there is any play in the front axle's CV joint. When the CV joint has excessive play, there will be slight front wheel vibration during acceleration, and a noticeable power transfer process when releasing the throttle.
19
1
Share

How Are the Seat Numbers Arranged on Long-Distance Buses?

Long-distance bus seat numbers are generally located at the top of the seats. The seats on the side of the boarding door are usually even-numbered. The numbers behind the driver are odd-numbered. Currently, long-distance buses typically have around 45 seats, and some may have more, around 54 seats. Sleeper buses usually have about 32 berths. The specifics may vary depending on the type of bus. Below is an introduction to bus classifications: 1. According to different service methods: The structure of buses also varies, and they can be divided into types such as touring coaches, city buses, highway buses, railway coaches, sightseeing buses, and school buses. 2. According to vehicle length classification: Mini buses - length under 3.5m; Light buses - length 3.5-7m; Medium buses - length 7-10m; Large buses - length 10-12m; Extra-large buses - including articulated buses (vehicle length over 12m) and double-decker buses (length 10-12m).
19
3
Share

What Causes Heavy Steering Wheel in Trucks?

Reasons for heavy steering wheel in trucks include: insufficient power steering fluid, contaminated power steering fluid, or issues with the power steering system. Additionally, during winter when temperatures are low, the slower movement of air molecules can cause a slight decrease in tire pressure, increasing the contact area between the tires and the ground, making the steering wheel feel heavier. Specific explanations are as follows: 1. Insufficient power steering fluid: Power steering fluid is the primary source of driving force for a vehicle. Therefore, when there is insufficient power steering fluid, the vehicle naturally struggles to move, let alone turn or change direction. 2. Contaminated power steering fluid: If the vehicle has difficulty turning the steering wheel, it may be due to the power steering fluid being mixed with unclean gases or impurities, preventing it from functioning properly and driving the vehicle. 3. Issues with the power steering system: The relationship between the steering wheel and the power steering system is naturally inseparable. When the steering wheel becomes heavy, it is highly likely that there are issues such as poor electrical contact or other problems within the power steering system.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.