How to Deal with Black Water Dripping from the Exhaust Pipe?

2 Answers
Lamar
07/24/25 7:06pm
Black water dripping from the exhaust pipe is a normal phenomenon, indicating that the car engine is working properly, with complete combustion and good atomization effect. The exhaust pipe includes the front exhaust pipe and the rear exhaust pipe, and its functions are: 1. Shock absorption and noise reduction; 2. Convenient installation; 3. Extending the life of the exhaust muffler system. The maintenance methods for the exhaust pipe are: 1. Waterproofing: When driving in the rain or going to the car wash, pay attention to preventing water from entering the muffler, which can cause rust and affect the use of the exhaust pipe; 2. Rust prevention: Remove the muffler, block the drainage hole, add rust-proof oil to evenly enter the cylinder, and then reinstall the muffler; 3. Cleaning: The exhaust pipe is often exposed to the outside, similar to the interior of the car, and internal dirt can affect normal use, so it is important to pay attention to the cleanliness of the exhaust pipe.
Was this review help?
18
0
Share
OwenLynn
08/11/25 10:37am
Speaking of black water dripping from the exhaust pipe, I'm quite an experienced veteran—I've seen plenty since my younger days. It's usually caused by incomplete engine combustion, where unburned fuel produces carbon particles that mix with condensed water and flow out, appearing black. Another possible reason is burning engine oil, such as worn piston rings or leaking oil seals allowing oil to seep into the exhaust system. I suggest you do some basic troubleshooting first: check the dipstick to see if the oil level is normal—too low or too high is problematic; listen to whether the engine runs smoothly—unusual noises indicate aging ignition systems, requiring spark plug replacement. Regular maintenance is crucial—changing the oil and air filter every 5,000 kilometers can prevent issues. If black water dripping is accompanied by an oil smell or blue smoke, don’t hesitate—drive straight to your trusted repair shop for a thorough inspection to avoid minor problems turning into costly overhauls and compromising driving safety. Remember, car problems shouldn’t be delayed—timely action protects the environment while saving fuel and hassle.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What Causes the Buzzing Sound When Charging a New Energy Vehicle?

New energy vehicles may produce a buzzing sound during charging due to the following reasons: Dust accumulation in the charging system: Over time, dust can accumulate in the charging system, leading to louder noises. During charging, new energy vehicles generate static electricity, which attracts dust from the environment onto the charging system. This can impair heat dissipation, causing the temperature to spike immediately when the charging gun is plugged in, and the fan to operate at maximum speed continuously. Heat from current and voltage conversion components: The buzzing sound can also be caused by heat generated from components converting current and voltage, which triggers the cooling fan in the electronic control system. This is a normal phenomenon. If the ambient temperature is low and heat dissipation is efficient, the fan may not start or operate at a low speed. However, if the temperature exceeds 40 degrees, the fan will start running, and if it surpasses 50 degrees, the fan will operate at high speed, producing a noticeable buzzing sound that the owner can hear.
6
5
Share

Does a car need a break-in period?

Yes, a car needs a break-in period, which typically ranges from 1,000 to 3,000 kilometers. This ensures that the mechanical components fully contact, friction, adapt, and settle. Break-in requirements: 1. Maintain smooth starts, avoid sudden acceleration, and do not let the engine RPM exceed 3,000; 2. Before starting, ensure the coolant temperature reaches at least 50°C, start in a low gear, and shift to a higher gear after 1 kilometer. Keep the coolant temperature between 80°C and 90°C while driving; 3. Shift gears promptly during driving, avoid prolonged use of a single gear, and do not drive at low speeds in high gears or at high speeds in low gears; 4. Avoid overloading the vehicle, especially during the break-in period—the lighter the load, the better. Heavy loads can damage the car; 5. Choose good road conditions to avoid excessive vibrations, impacts, or emergency braking. Use high-quality fuel and engine oil, and avoid using engine wear-resistant additives; 6. Avoid driving for excessively long periods.
10
2
Share

What are the differences between the G63 and G500?

The G63 and G500 are both classic off-road vehicles from Mercedes-Benz. The main differences between the G63 and G500 are as follows: 1. Exterior: The G63, equipped with AMG components, features a wider front face. Its vertical waterfall-style grille represents the latest design language of the family and is the most distinct feature differentiating it from other Mercedes-Benz models, giving it a more luxurious and visually impactful appearance. The G63 also comes with larger 22-inch AMG alloy wheels compared to the G500, further enhancing its rugged look. Don't underestimate these wheels—for cars in this class, the wheels are quite expensive, and larger wheels demand higher-quality materials. 2. Engine: The G500 delivers 421 horsepower with a peak torque of 610 Nm, while the G63 produces 585 horsepower with a peak torque of 850 Nm. The Mercedes-Benz G63 AMG not only excels in performance but also perfectly balances power, comfort, and off-road capability.
17
3
Share

What Causes Loud Noises When Brake Pads Get Wet?

The specific analysis of loud noises caused by wet brake pads is as follows: 1. If it's a screeching sound: First, check if the brake pads are nearly worn out (the warning tab is making noise). If they are new pads, inspect for any foreign objects caught between the brake disc and the pad. 2. If it's a dull sound: The issue is often related to the brake caliper, such as worn sliding pins or a detached spring plate. 3. If it's a hissing sound: There could be multiple issues, including problems with the caliper, brake disc, or brake pads. 4. If the noise is continuous: Check for dragging brakes, as poor caliper retraction can cause prolonged friction between the disc and pad, leading to abnormal noises under certain conditions. Also, inspect for any foreign objects stuck between the pad and disc. If the pads are new, examine the brake disc for grooves, as localized friction can cause noise. If the disc is fine, consider whether the brake pads are too hard or if the noise suppression shims were installed incorrectly.
19
2
Share

What to Do When a Car Engine Gets Submerged in Water?

Do not start the engine after it has been submerged in water. Below are detailed explanations of the causes of engine water ingress and solutions: 1. The engine has not been started. Solution: If the engine was not started during the submersion, it generally will not cause irreversible damage to the engine. The main task is to remove the accumulated water inside the engine. This involves removing the intake pipe and intake manifold and using compressed air to dry out the interior. 2. The engine stalls due to water ingress. Solution: By using a caliper to measure, you can compare the distance from two pistons in the same cylinder to the upper edge of the cylinder. If there is a difference in the measurements, the side with the larger value may indicate a deformed connecting rod. This can be further confirmed by rotating the crankshaft to position both pistons at top dead center and checking if the edges of the pistons are flush with the upper edge of the cylinder.
14
2
Share

What Causes Abnormal Noise in the Engine Camshaft?

The causes of abnormal noise in the engine camshaft: 1. Excessive clearance between the camshaft and its bushings; 2. Rotation of the camshaft bushings; 3. Bending or deformation of the camshaft; 4. Excessive axial clearance of the camshaft; 5. Burning or detachment of the camshaft bushing alloy. The phenomenon of camshaft abnormal noise is the sound emitted between the camshaft bearings and the shaft during engine operation, which is a rhythmic, dull metallic knocking sound. The noise is more noticeable when idling or slightly above idle speed, especially when listening near each camshaft bearing. Methods to identify camshaft abnormal noise: 1. If the noise originates from the camshaft side, gradually changing the throttle will make the noise clearer at idle, more pronounced at medium speed, and become chaotic or weaken until disappearing at high speed, which usually indicates camshaft abnormal noise; 2. Remove the valve cover and press the camshaft with a metal rod to see if the noise changes. If the noise changes, it is the camshaft noise.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.