···
Log in / Register

How to Deal with Asphalt Splashed on the Car?

4 Answers
Naomi
07/29/25 2:48pm
If it's not very severe, you can directly rinse it off with high-pressure water. For difficult-to-clean parts, repeated washing may be necessary. If the asphalt is severe, it is recommended to purchase a specialized "Tar Cleaner." Here are some tips on cleaning asphalt: 1. Cleaning Formula: To remove stains like paint or asphalt, you can use a 10-20% ammonia solution (you can also add half the amount of turpentine to the ammonia) or soak in a 2% borax solution, then wash after dissolution. Another method is to soak in benzene or toluene, dissolve, and then wash. 2. Precautions: If accidentally contacted with eyes, rinse immediately with plenty of water and seek medical attention; if accidentally ingested, induce vomiting immediately and seek medical attention. Avoid exposure to sunlight, impact, puncturing, or burning the container.
Was this review help?
19
3
Share
DiClaire
08/13/25 7:18am
Last time I encountered asphalt splashed on my car, which was really annoying. I remember I had just driven through a road under repair and noticed several black spots on the body. If asphalt adheres to the paint and isn't cleaned promptly, it can corrode the paint, leaving permanent stains or causing rust. I immediately sprayed a dedicated asphalt remover on the spots, waited a few minutes for it to dissolve the dirt, and then gently wiped it off with a soft cloth—avoiding hard scraping to prevent paint damage. If the asphalt had dried and hardened, making it difficult to remove, I repeated the process a few times or took it to a professional car wash for them to handle. Afterwards, I recommended applying a layer of wax to protect the paint and advised avoiding construction areas while driving to reduce such troubles. Overall, with proper handling, the car's shiny appearance can be quickly restored.
Was this review help?
3
3
Share
Expand All
OLeonardo
10/11/25 4:41am
My car often runs on the highway, and last week it got splattered with asphalt, leaving black dots on the paint that really bothered me. I tried cleaning it with household items like soapy water, but the results were mediocre. Later, I learned that professional asphalt removers work best, such as brands like Turtle Wax. Spray it on and let the chemicals soften the asphalt for a while, then gently wipe it off with a soft sponge or an old cloth—avoid using hard tools to prevent scratches. After cleaning, I prefer rinsing it with water to ensure no residue remains. For prevention, I try to avoid driving on freshly paved asphalt roads to save myself the hassle. Honestly, it’s not that difficult—dealing with it early saves a lot of trouble.
Was this review help?
4
1
Share
Expand All
OJesse
11/24/25 5:48am
I found asphalt splashed on my car and directly used asphalt cleaner to deal with it. Spray it on the stained area, wait for about five minutes, then gently wipe with a towel. Light stains can be removed in one go; for deeper ones, repeat spraying and wiping, or simply leave it to the car wash shop. I've used this method many times—it's quick and hassle-free. Remember not to scratch the car paint, and timely action yields the best results.
Was this review help?
8
1
Share
Expand All
More Forum Discussions

How to Remove the Rear Seat of Nissan Sylphy

Nissan Sylphy rear seat removal method: 1. First, lift the rear seat cushion upwards sharply. There are fixing clips on both sides at approximately the middle position of the cushion's three equal parts. The U-shaped metal pieces are inserted into the clips below; 2. After removing the front clips of the cushion, there are two more U-shaped metal pieces at the back of the cushion. There are corresponding metal hooks under the backrest. You need to push the cushion firmly inward, then tilt the front upwards to remove it from the hooks; 3. After removing the cushion, unscrew the three screws under the backrest, lift it upwards, and remove the rear seat. The Sylphy is a model launched globally by Nissan, with a wheelbase of 2700mm. It features a liquid crystal instrument panel, a floating central control screen, and is powered by the HR16 engine, a 1.6L naturally aspirated engine with a maximum horsepower of 135, maximum power of 99kW, and maximum torque of 159Nm. The vehicle comes standard with halogen headlights, LED combination taillights, speed-sensitive front wipers, remote key, intelligent trip computer, electrically adjustable exterior mirrors, manual air conditioning, air filter, speakers, manually adjustable driver's seat, four-door power windows, front dual airbags, manual anti-glare interior rearview mirror, tire pressure monitoring system, vehicle dynamic control system, etc.
19
5
Share

How to Improve Thermal Efficiency?

By adopting CVVD technology, it is possible to increase the maximum thermal efficiency of these engines to over 50%. The following are the functions of CVVD: 1. Reduce resistance: CVVD technology can extend the opening time of the intake valve to the middle and late stages of the compression stroke, thereby improving fuel efficiency by reducing resistance caused by compression. On the other hand, when the engine output is high, such as when the car is driving at high speed, the intake valve will remain closed at the beginning of the compression stroke to maximize the amount of air required for detonation. 2. Improve performance: Increase the torque of the engine and enhance the acceleration performance of the vehicle.
4
2
Share

Is it harmful to drive a short distance with the handbrake engaged?

Driving with the handbrake engaged for a short distance can easily damage the brake discs. Related information: 1. Introduction: The professional term for the handbrake is auxiliary brake, which operates differently from the main brake system. It uses a steel wire cable connected to the rear brake shoes to apply braking force to the vehicle. Prolonged use of the handbrake can cause plastic deformation of the steel wire, which is irreversible. Therefore, long-term use will reduce its effectiveness. 2. Precautions: If you start driving without releasing the handbrake, the car is prone to stalling. The brake pump is an elastic pressure device. After driving for a while, the tightness of the brake pads, brake discs, and handbrake cable will adjust accordingly.
6
3
Share

What Causes Difficulty in Restarting a Motorcycle After Stalling?

If a motorcycle stalls after running for a while and is difficult to restart shortly afterward, but starts smoothly again after cooling down for a while, it is generally an issue with the ignition system. Below are some extended details: 1. When encountering a failure to start, the first step is to remove the high-voltage cap, hold the spark plug wire a few millimeters away from the metal tip of the spark plug, and then attempt to start the engine to check for spark. If there is no spark, the issue is likely with the ignition system. For carbureted motorcycles, a faulty CDI ignition unit should be considered as a primary suspect. 2. If the engine oil has deteriorated, is insufficient, or the oil passages are blocked, the engine may stall due to excessively high oil temperatures. In such cases, it is necessary to replace or top up the engine oil and clear any blockages in the oil passages.
15
3
Share

What are the differences between the E300 upright emblem and large emblem?

e300 upright emblem and large emblem have the following differences: 1. Appearance: The Mercedes-Benz large emblem version has a strong sense of fashion and sportiness overall, with a highly recognizable large emblem design. The entire front fascia design differs from the upright emblem version. Visually more aggressive, the wheels feature a five-spoke design, exuding a strong sporty feel. Additionally, different colors are available to suit various driving environments. In terms of emblem usage, the Mercedes large emblem represents luxury and a business-like atmosphere, appearing exceptionally grand. The large-sized grille gives the front fascia a very mature look. 2. Style: The upright emblem version is more grand and business-oriented, resembling the S-Class, making it more suitable for formal occasions, while the large emblem version is more youthful and sporty.
9
3
Share

What is a Ford car?

Ford is a world-renowned automobile brand, one of the many brands under the American Ford Motor Company. The company and brand name 'Ford' originates from the surname of its founder, Henry Ford. Ford Motor Company is one of the largest automobile manufacturers in the world, established in 1903, with its headquarters located in Dearborn, Michigan. Here are some relevant details about Ford: 1. Brand Introduction: Ford Motor Company is one of the largest automobile enterprises in the world. Founded in the early 20th century, Ford Motor Company, with the dream and exceptional vision of its founder Henry Ford to 'manufacture cars affordable to everyone,' has weathered a century of challenges and changes, eventually becoming one of the world's top four automobile group companies. 2. Origin of the Logo: The Ford logo features the English word 'Ford' in white letters against a blue background. Because the founder Henry Ford liked small animals, the logo designer depicted the English word 'Ford' in the shape of a little white rabbit.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.