How to Deal with Always Deviating in Straight-line Driving During Subject Three Test?

What material is the spark plug of the Haval H6 made of?

Haval H6's original spark plug uses the Champion RC8PYCBX single platinum model. Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be referenced for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris such as leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage ignition wires according to the firing order, and then secure the cover.

18

2

Share

Where is the oil dipstick for Audi A4?

Audi A4 does not have an oil dipstick. The oil level is displayed electronically in real-time. Press the 'car' button and select 'Maintenance' to find the oil level option for viewing. The proper use of an oil dipstick plays a crucial role in extending the engine's lifespan. More details about the oil dipstick are as follows: 1. The function of the oil dipstick is not only to check the level of engine lubricating oil. Experienced drivers or repair personnel can detect many engine working conditions by inspecting the oil dipstick, thereby maintaining the engine, identifying the causes of faults or accidents promptly, preventing further deterioration of issues, and making quick and accurate judgments based on reliable information. 2. The oil dipstick measures the static height of the oil level, reflecting whether the engine's oil volume is within a reasonable range. 3. A conventional oil dipstick will have clear upper and lower limits. Simply ensure the measured oil level is between these two marks. Ideally, the level should be in the middle. It's important to note that more oil is not necessarily better. A higher oil level actually increases engine resistance (since the crankshaft continuously agitates the oil in the oil pan for splash lubrication). Under ideal conditions, keeping the oil level slightly below the middle position minimizes engine resistance and fuel consumption while maintaining stable lubrication performance.

4

3

Share

What does 'steer towards the narrower side when reversing into a parking space' mean?

Taking left-side reversing as an example, if you notice that the distance between your car and the left edge of the parking space is too large, you should steer to the left. Conversely, if the distance to the left edge appears too narrow, you need to immediately steer to the right and straighten the wheels promptly to successfully park the car. For right-side reversing, you should observe the right rearview mirror to monitor the distance between your car body and the right edge of the parking space during the process. There are three most common types of reversing maneuvers: 1. "Non-character style" parallel parking: In this method, your vehicle should be perpendicular to the target parking space. Using your car's B-pillar as a reference point against the first parking space, you can generally reverse into the third space. This method is particularly suitable for novice drivers, as most driving school students find it relatively common and easier to learn. 2. "Linear style" parallel parking: This involves using the car in front as a reference. Align your car body, turn the steering wheel to the right, and when the angle between the two cars reaches 45 degrees, observe and straighten the wheel while reversing. If estimated correctly, you can complete the parking in one go. This method often requires occupying part of the driving lane and is about as challenging as the non-character style. 3. "Diagonal line style" parking: These two reversing methods usually require one to two training sessions for driving school students to master proficiently. Of course, there are also some less common diagonal or irregular parking scenarios.

18

4

Share

What is the minimum ground clearance of the Audi A3?

The minimum ground clearance of the Audi A3 is 118 millimeters. The minimum ground clearance of the Audi A3 refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance for the Audi A3 improves its off-road capability, but if the ground clearance is too high, the stability during high-speed driving will decrease. The A3 was the pioneer among luxury brands to venture into the compact car segment. In 1996, Volkswagen used the PQ34 platform of the Golf to develop this three-door version of the Audi sports car. The dimensions of the Audi A3 are 4554 mm in length, 1814 mm in width, and 1429 mm in height, with a wheelbase of 2680 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while that of SUVs ranges between 200 mm and 250 mm. However, the ground clearance of the Audi A3 is not static; this data also depends on the load condition, so changes in ground clearance should be considered based on the variation in the Audi A3's load. When selecting a vehicle, ground clearance can be one of the reference factors. The specific choice depends on the vehicle's purpose and the road conditions. Generally, in urban areas with good road surfaces, a vehicle with lower ground clearance can be chosen to enhance stability and comfort. If you frequently travel to remote areas or drive on poor road conditions, considering the vehicle's off-road performance, a vehicle with higher ground clearance can be selected to avoid scraping or damaging the chassis.

20

0

Share

What is the fuel tank capacity of the 2013 Buick Excelle in liters?

The fuel tank capacity of the 2013 Buick Excelle is 60 liters, as officially announced. Owners of the 2013 Buick Excelle can also check this information on the vehicle's configuration sheet. A car's fuel tank must have a sufficiently large capacity. The suction pipe and return pipe should be inserted below the minimum liquid level to prevent air bubbles from forming due to suction or splashing during fuel return. The distance between the suction pipe and return pipe in the fuel tank should be as far apart as possible, and it is best to have a partition installed between them. The 2013 Excelle 1.5L manual classic model uses 92-octane fuel, with a fuel consumption of 6.6L/100km. A full tank can cover a distance of 909km. The 2013 Excelle 1.5L automatic classic model also uses 92-octane fuel, with a fuel consumption of 7.6L/100km. A full tank can cover a distance of 789km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. Other factors affecting fuel consumption include: Vehicle weight: There is a direct correlation between vehicle weight and fuel consumption. A 10% reduction in weight leads to a corresponding reduction in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in significantly lower fuel consumption, while a higher drag coefficient increases fuel consumption proportionally. Tire pressure: Low tire pressure increases friction and adhesion, leading to higher fuel consumption. Driving habits: Aggressive acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against the wind increases engine workload and fuel consumption. Road conditions: Fuel consumption is lower on flat roads and higher on rough or steep roads. Additional electronic devices: Using extra equipment like air conditioning while driving increases fuel consumption.

18

3

Share

Is there a mandatory retirement age for passenger cars?

For household 5-seat passenger cars and 7-seat SUVs, non-commercial small and mini vehicles have no usage lifespan limit. When the normal mileage reaches 600,000 kilometers, the state will guide the retirement process. In addition to the above-mentioned vehicles, small and mini non-commercial passenger vehicles, large non-commercial passenger cars, and wheeled special machinery vehicles also have no usage lifespan restrictions. Commercial vehicles have mandatory retirement ages as follows: Small and mini taxi passenger vehicles have a retirement age of 8 years, medium taxi passenger vehicles 10 years, and large taxi passenger vehicles 12 years. Public bus passenger vehicles have a retirement age of 13 years, other small and mini commercial passenger vehicles 10 years, and large and medium commercial passenger vehicles 15 years. Mini commercial trucks have a retirement age of 8 years, light and large commercial trucks 10 years. The vehicle retirement process is as follows: The vehicle owner applying for retirement renewal must fill out an "Application Form for Vehicle Modification, Transfer, Alteration, Suspension, or Retirement" and affix their seal. The registration office accepts the application and issues a "Vehicle Retirement Notice" for vehicles that have reached the retirement age. For vehicles not yet at retirement age, after inspection and confirmation of meeting retirement standards, a "Vehicle Retirement Notification" is issued. The owner chooses a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company dismantles the vehicle and takes photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block broken, and the frame (chassis) cut. The owner submits the "Modification Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Recycled Vehicle Certificate", and dismantling photos to the inspection office for verification and signature. The license plates are reclaimed, and the retirement registration is processed after approval. Special Notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle cannot be driven back to its registration location due to damage, the owner may surrender it to a local recycling company. Commercial vehicles converted to non-commercial use must still retire according to their original commercial vehicle retirement age. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing vehicle transfer or cancellation registration, the original owner can apply to reuse the original license plate number when registering a new vehicle, provided: (1) the application is made within six months after transfer or cancellation; (2) the owner possessed the original vehicle for over three years.

9

3

Share

How to Deal with Always Deviating in Straight-line Driving During Subject Three Test?

What material is the spark plug of the Haval H6 made of?

Where is the oil dipstick for Audi A4?

What does 'steer towards the narrower side when reversing into a parking space' mean?

What is the minimum ground clearance of the Audi A3?

What is the fuel tank capacity of the 2013 Buick Excelle in liters?

Is there a mandatory retirement age for passenger cars?

How to align the timing belt of Hyundai Sonata?

How to lock the doors of a Haval H6?

Does the Teana have a hybrid version?

What Suspension Does the Haoying Use?