How to Deal with Air Conditioner Water Corroding Car Paint?

What engine does the Volkswagen Sagitar have?

The engine of the Volkswagen Sagitar is developed by the Volkswagen Group and produced by FAW-Volkswagen Engine (Chengdu) Co., Ltd. The 1.2T version of the Volkswagen Sagitar has an engine model EA211-DLS, with a maximum power of 85kw, maximum torque of 175 Nm, and maximum horsepower of 116. The 1.4T version has an engine model EA211-DJS, with a maximum power of 110kw, maximum torque of 250 Nm, and maximum horsepower of 150. For daily maintenance of the Volkswagen Sagitar's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

13

5

Share

What to Do When the Bora Tire Pressure Monitoring Light Frequently Comes On?

First, check if there is indeed an issue with any of the tires. If no fault is found, it can be considered a false alarm. Simply press and hold the tire pressure button for more than 30 seconds to reset the system, which will set the new tire parameters as the default values. The illumination of the Bora tire pressure monitoring light is a very dangerous signal and should be taken seriously. The following three situations can also cause the tire pressure monitoring light to come on: 1. The tire pressure monitoring light comes on due to a punctured tire. 2. The tire pressure monitoring light may come on due to excessively high tire pressure: The standard requirement is usually 2.4-2.5 bar for standard tires and 2.8-2.9 bar for reinforced tires. The maximum pressure should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it will trigger the tire pressure monitoring light. 3. The tire pressure monitoring light comes on due to prolonged driving with low tire pressure: If a tire's pressure is too low, high-speed operation will increase the tire temperature, leading to a rise in tire pressure. In such cases, it is advisable to stop and rest or replace the spare tire promptly.

18

2

Share

What is the mileage for the first maintenance of the Lynk & Co 03?

The first maintenance for the Lynk & Co 03 is generally recommended between 5,000 to 10,000 kilometers. For new cars, the first service should be done at 3,000-5,000 kilometers, not exceeding 5,000 kilometers. The Lynk & Co 03 requires an oil change at 5,000 kilometers. When the car reaches 10,000 kilometers, the air filter and oil filter should be replaced. If the car reaches 25,000 kilometers, the fuel filter and spark plugs should be replaced. Details about the first maintenance are as follows: 1. The first maintenance is the initial service after the vehicle's break-in period. It involves the first inspection after the initial running-in of the vehicle. The lubricating oil used during the break-in period and the oil filter are replaced, and key components are inspected. The first maintenance is the initial step in the vehicle's regular maintenance schedule. 2. Specific items for the first maintenance include: replacing the engine oil and oil filter, cleaning the air filter, checking the levels of various fluids, inspecting the generator belt and wiper blades for damage, checking tire pressure, and examining the tires for uneven wear, bulges, or other damages.

6

1

Share

Can You Still Drive with Excessive Oil Pressure?

If the oil pressure warning light comes on while driving, indicating excessive oil pressure, it is advisable not to continue driving. Continuing to drive may cause further damage to the engine. You should first pull over and check whether the oil level is normal, then contact a repair shop for assistance. The causes of excessive oil pressure include: 1. The oil viscosity is too high, the main oil passage is blocked, the cylinder block is clogged, or the oil filter is obstructed. If the engine is running normally but the oil gauge reading exceeds the specified value, power decreases, and sometimes the sensor or oil filter housing may be damaged. It is recommended to remove the filter and check whether the filter element is too dirty or clogged, or whether the bypass valve spring is too strong to open, leading to excessive oil pressure. 2. Check whether the pressure relief valve spring is too tight or the spring force is too strong to open. In some models, if the pressure relief valve piston is stuck and cannot lift, it may also cause excessive oil pressure. If the above checks show no abnormalities, inspect whether the oil passage in the cylinder block leading to the crankshaft bearing (except for newly assembled engines) is blocked. A blocked oil passage can easily cause high oil pressure and bearing failure.

17

1

Share

Where is the rearview mirror folding switch on the Geely Boyue?

The rearview mirror folding switch on the Geely Boyue is a rotary knob located at the lower left corner of the steering wheel. Rotate the exterior rearview mirror adjustment switch knob to the upper left position to simultaneously fold both left and right exterior rearview mirrors. Rearview mirrors are divided into interior and exterior mirrors, serving as 'second eyes' that expand the driver's field of vision. Information about rearview mirrors is as follows: 1. Rearview mirrors are tools that allow drivers, seated in the driver's seat, to directly obtain external information about the rear, sides, and underside of the vehicle. 2. As the widest component installed on a vehicle, rearview mirrors are most susceptible to impact in the event of a collision. To minimize damage, rearview mirrors are equipped with a folding function. 3. Rearview mirrors with a folding function can be retracted when passing through narrow sections, improving the vehicle's maneuverability. When the driver leaves the vehicle, the rearview mirrors can also be folded to protect the mirror surfaces.

10

5

Share

How to Fold Down the Rear Seats in a Santana?

Santana's rear seats cannot be folded down. The rear seats of this model are fixed with screws and can only be removed, not folded. Below is relevant information about the rear seats: 1. Split-folding rear seats refer to the backrests of the rear seats being foldable in specific proportions. 2. Compared to full-folding rear seats, split-folding offers greater flexibility, allowing only half of the backrest to be folded down for larger items while the remaining part can still accommodate passengers. 3. Common rear seat folding proportions include: 1/3, 2/3, and 1/2. 1/3:2/3 split-folding: Typically found in rear seats with three seats, allowing either two seats on one side or one seat on the opposite side to be folded down. 1/2 split-folding: Usually seen in rear seats with two seats, enabling one of the two seats to be folded down. 4. Full-folding rear seats refer to the backrest being a single unit. When more space is needed for larger items, the entire rear seat backrest can be folded down to provide additional space. The drawback of full-folding rear seats is that passengers cannot sit in the rear when the seats are folded down.

4

1

Share

How to Deal with Air Conditioner Water Corroding Car Paint?

What engine does the Volkswagen Sagitar have?

What to Do When the Bora Tire Pressure Monitoring Light Frequently Comes On?

What is the mileage for the first maintenance of the Lynk & Co 03?

Can You Still Drive with Excessive Oil Pressure?

Where is the rearview mirror folding switch on the Geely Boyue?

How to Fold Down the Rear Seats in a Santana?

What does auto mean?

Where is the cabin air filter located in the Dongfeng Renault Koleos?

What to Do When the Passat Can't Find the Key?

What brand of car is NIO?