How to Deal with ABS System Failure in BMW 5 Series?

Does Electric Power Steering Have Power Steering Fluid?

Electric power steering does not use power steering fluid. The characteristics of electric power steering are: 1. It can significantly improve the dynamic and static performance of the vehicle; 2. It reduces fuel consumption; 3. It enhances steering responsiveness; 4. It improves handling stability; 5. It enhances the steering return characteristics; 6. It reduces environmental pollution; 7. The system has a simple structure and occupies less space. Electric power steering uses an electric motor to directly provide assistance, with the assistance level controlled by the electronic control unit (ECU). Power steering fluid is a special liquid used in the vehicle's power steering pump, which, through hydraulic action, makes the steering wheel lighter to operate, similar to automatic transmission fluid, brake fluid, and shock absorber fluid.

13

1

Share

Is CVT a Manual Transmission or an Automatic Transmission?

CVT is an automatic transmission. Some CVT transmissions also come with a manual-automatic mode, allowing switching between automatic and manual modes. In Chinese, CVT transmission is referred to as continuously variable transmission. Its shifting principle differs from the stepped shifting of ordinary AT transmissions. The principle involves two hydraulically controlled conical discs that adjust the diameter of the steel belt by tightening and loosening, thereby achieving gear shifting. The transmission, also known as the gearbox, is an automotive component used to alter the speed and torque from the engine and can fix or change the gear ratio between the output and input shafts. The transmission consists of a gear-shifting mechanism and an operating mechanism, with some vehicles also featuring a power output mechanism.

12

0

Share

What are the causes of jerky movement in a car?

The causes of jerky movement in a car are: 1. Dirty fuel injectors and throttle body; 2. Excessive carbon buildup in the throttle body, leading to insufficient air supply; 3. Aging spark plugs; 4. Poor quality engine oil. The fuel injector is essentially a normally closed valve. When the electromagnetic coil is energized, it creates a magnetic force that lifts the needle valve, opening the injection port. Fuel is then sprayed at high speed through the annular gap between the needle valve head and the injection port, forming a mist that facilitates complete combustion. The throttle body is a controllable valve that regulates the air entering the engine, available in two types: traditional cable-operated and electronic throttle. The spark plug's function is to discharge the high-voltage pulse sent by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder.

8

3

Share

How often should the Highlander's cabin air filter be replaced?

The Highlander's cabin air filter should be replaced every 10,000 to 20,000 kilometers. The Highlander is a mid-size SUV equipped with a 2.0T L4 turbocharged engine delivering 220ps maximum horsepower and 350Nm peak torque. Its dimensions measure 4890mm in length, 1925mm in width, and 1720mm in height, with a 2790mm wheelbase. This 5-door, 5-seat SUV features a 6-speed automatic transmission. Commonly known as a pollen filter, the cabin air filter functions to purify incoming air by removing impurities such as microscopic particles, pollen, bacteria, industrial exhaust, and dust from entering the vehicle interior.

2

3

Share

What are the steps for replacing the water pump on the new Passat?

The steps for replacing the water pump on the new Passat are: 1. First, remove the curved section of the intake pipe; 2. Disconnect the throttle body, intake pressure sensor plug, and the carbon canister hose connector; 3. Remove the oil filter; 4. Use a 17mm open-end wrench to loosen the high-pressure fuel pump connector screw; 5. The intake manifold bracket needs to be removed, and the intake pipe interface below should be blocked with a cloth to prevent foreign objects from entering; 6. Ensure all screws are loosened and plugs are disconnected, then firmly pull the intake manifold outward to remove it; 7. Take out the intake manifold assembly; 8. Loosen the screws on the water pump body in sequence and disconnect the water temperature sensor; 9. Remove the water pump assembly. The new Passat is a mid-size car under SAIC Volkswagen, equipped with a 1.4T L4 engine featuring turbocharged intake, delivering a maximum horsepower of 150ps.

6

1

Share

How to Adjust the Rearview Mirror on the New Jetta?

To adjust the rearview mirrors on the New Jetta, follow these steps: 1. For the left mirror, rotate the control button to the 'L' position, then adjust the angle by moving the button up, down, left, or right. 2. For the right mirror, rotate the control button to the 'R' position and adjust the angle similarly. 3. Once you've adjusted the mirrors to your preferred position, rotate the button back to the middle. The New Jetta measures 4501mm in length, 1704mm in width, and 1469mm in height, with a wheelbase of 2604mm. It is a 4-door, 5-seater sedan equipped with a 5-speed manual transmission and has a top speed of 181 km/h.

6

3

Share

How to Deal with ABS System Failure in BMW 5 Series?

Does Electric Power Steering Have Power Steering Fluid?

Is CVT a Manual Transmission or an Automatic Transmission?

What are the causes of jerky movement in a car?

How often should the Highlander's cabin air filter be replaced?

What are the steps for replacing the water pump on the new Passat?

How to Adjust the Rearview Mirror on the New Jetta?

What does engine knocking mean?

Where is the fog light switch on the Baojun 310?

How often should the Jetta VS5 be serviced?

Which country does Hongqi belong to?