···
Log in / Register

How to Deal with Abnormal Noises When Braking?

5 Answers
BryceFitz
07/29/25 11:50am

When abnormal noises occur during vehicle braking, the common causes include the following: 1. New car making noise when braking: The brake pads and rotors of a new car have not yet been fully broken in, which can sometimes result in a "squeaking" friction sound. This is normal, and the noise will naturally disappear after some use. 2. Noise after replacing brake components: After installing new brake pads, incorrect installation may cause abnormal noises. Common installation errors include mounting the brake pads upside down, where the metal side contacts the rotor, leading to noise. 3. Noise due to brake rotor issues: Prolonged use can cause deep grooves on the rotor surface or deep steps at the edges. Uneven contact between the brake pads and rotor can produce noise. In such cases, the rotor needs replacement or resurfacing using a brake lathe. 4. Noise caused by sand or debris in the brakes: If foreign objects like sand or small stones get between the brake pads and rotor while driving, a sharp hissing sound may occur. Continuing to drive normally will usually dislodge the debris, eliminating the noise. If the noise persists, the wheel may need removal to extract the debris. 5. Noise during hard braking: When braking sharply, a clicking sound accompanied by pedal vibration is normal and indicates ABS activation.

Was this review help?
2
0
Share
SanMarcus
08/13/25 8:52pm

Brake noise should never be ignored. When I encounter this situation, I usually first check the thickness of the brake pads. If they're worn too thin, they need to be replaced - generally anything below 3mm is considered dangerous. Next, there might be debris or rust on the brake discs. Wiping them with a cloth or spraying some cleaner might eliminate the noise. It's also important to check if the brake caliper is stuck - insufficient lubrication often causes squeaking, so when doing DIY maintenance, be sure to use specialized grease. For safety, if the noise gets louder during deceleration, immediately find a safe place to stop and inspect - don't risk driving and causing an accident. Make it a habit to have your brake system inspected by a repair shop every six months to prevent small issues from turning into major problems.

Was this review help?
15
4
Share
Expand All
VincentRose
08/13/25 8:54pm

Hearing abnormal brake noises immediately puts me on high alert, as it directly relates to driving safety. Possible causes include excessively worn brake pads or caliper issues. You can perform simple checks like measuring pad thickness or cleaning brake discs with tools, but for complex situations such as voltage testing or part replacements, it's best to consult professionals. If abnormal noises occur on highways, promptly turn on hazard lights, pull over, and seek assistance—never risk continuing to drive. Regular maintenance is crucial; a monthly visual inspection of the brake system can help prevent potential hazards by addressing issues early.

Was this review help?
3
0
Share
Expand All
EllaFitz
10/08/25 6:53am

I'm the type who drives very carefully, and every time there's a strange noise when braking, it really bothers me. Last time my car made a squeaking sound, I found out the brake pads were worn out—spending a bit to replace them solved the issue. Sometimes, it's just sand or metal shavings stuck in the brake disc, which can be removed by blowing them out with compressed air. If the problem is more serious, like the noise persisting even when braking hard, it's best to take it to a professional repair shop—it could be a stuck caliper or wiring issue. Don't just focus on saving money; ignoring these unusual sounds could lead to brake failure, which is too risky. I make it a habit to get regular maintenance, checking the brake fluid and component wear, which saves a lot of trouble down the road.

Was this review help?
16
1
Share
Expand All
LaLogan
11/21/25 8:13am

Brake noise is quite common, and I usually start by checking it myself. For example, see if the brake pads are lacking lubrication or have dust on them, and try wiping them with a cloth. If that doesn't work, it's likely time to replace the pads. From a safety perspective, if the noise gets loud, pull over immediately and don't force the drive. It's recommended to visit a reliable auto repair shop for diagnosis to avoid causing further damage by tinkering yourself. When driving, pay attention to the road surface and avoid slowing down in muddy areas to reduce the chance of debris getting in.

Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Turn on the Car Air Conditioning Heating?

The method to turn on the car air conditioning heating is: 1. Start the car and wait until the water temperature rises to the normal level, then turn on the heating; 2. Switch the air circulation mode to the internal circulation setting; 3. Adjust to the heating mode; 4. There is no need to turn on the AC switch; 5. Set the air conditioning to a suitable level. The components of car air conditioning include: 1. The air conditioning refrigeration system; 2. The heating system; 3. The air distribution system and the control system. The functions of car air conditioning are: 1. To regulate the temperature, humidity, airflow direction, and speed inside the car, and to improve the air quality through the filter; 2. To provide a comfortable riding environment for passengers, reduce travel fatigue, create good working conditions for the driver, and ensure safe driving with proper ventilation.
6
0
Share

How many tons can the Changan Kuayue Wang X5 carry?

Changan Kuayue Wang X5 can carry about 4 tons. Here are the specific details of the Kuayue Wang X5: 1. Vehicle Positioning: The Kuayue Wang X5 is a light truck launched by Changan Automobile, equipped with a 3.5-ton rear axle and a series of configurations designed to enhance load-bearing performance. 2. Power: This vehicle is powered by a 1.5L engine, which delivers a maximum power of 112 horsepower and a maximum torque of 143 Nm. The engine complies with the National Five vehicle emission standards. 3. Transmission System: The vehicle is paired with a Qingshan MR515 five-speed transmission.
15
5
Share

What Does the Maintenance Light on the Kadjar Mean?

The maintenance light on the Kadjar illuminates to remind the owner that maintenance is required. Below are the specific details about the Renault Kadjar: 1. Vehicle Positioning: The Renault Kadjar is a compact SUV domestically produced by Dongfeng Renault. The body dimensions of the Kadjar are 4508 1836 1610mm. 2. Powertrain: It features two powertrain options: a 1.2-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.2-liter model delivers a maximum horsepower of 117 HP, a maximum power output of 86 kW, and a maximum torque of 190 N·m. The 2.0-liter model offers a maximum horsepower of 154 HP, a maximum power output of 113 kW, and a maximum torque of 196 N·m. Transmission options include a 6-speed manual and a CVT continuously variable transmission.
7
1
Share

What Causes the Gurgling Water Sound When the Car Stops?

The gurgling water sound when the car stops is caused by gas in the cold exhaust pipe waiting to be re-burned. Possible reasons for sounds when the car stops include: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is between 400 to 800 degrees Celsius. After turning off the engine, it gradually stops working, the temperature drops, and internal metal components expand and contract due to heat, producing abnormal noises; 2. Cooling sound of the exhaust pipe: The temperature of the exhaust pipe during cold idle is around 200 degrees Celsius, and the thermal expansion and contraction of the exhaust pipe cause abnormal noises; 3. Turbo cooling sound: The rapid rotation and friction of the turbocharger generate high temperatures. After turning off the engine, the thermal expansion and contraction become very noticeable, producing abnormal noises; 4. Abnormal noises caused by uneven cooling of the engine: The engine temperature is very high, and after turning off the engine, the temperature of various components drops at different rates, leading to gaps between internal metal parts cooling and contracting, resulting in friction and abnormal noises.
15
5
Share

Should You Inspect the Car or Pay First When Taking Delivery?

Generally, the car delivery process involves inspecting the vehicle first. Do not rush to make the payment before thoroughly checking the new car, as once the payment is made, it essentially means all procedures are completed, handing over the initiative to the dealer. If any issues are found during the inspection afterward, it may become inconvenient to request a refund or exchange. Key considerations when taking delivery of a new car are as follows: 1. Taxation: Taxation is an essential step in the car purchase process. Most tax payment windows for vehicles do not accept cash, so it is advisable to prepare a bank card in advance. Typically, the vehicle management office also has dedicated tax payment windows where you can complete this process. 2. Selecting the Model and Configuration: The first step in buying a car is to choose the model and the desired configuration. When selecting a model, it is crucial to consider your budget. The principle of car selection is to first determine the type of vehicle you want—such as a sedan or SUV—and then prioritize the parameters that matter most to you, such as fuel consumption, maintenance costs, space, noise levels, and cargo capacity.
20
2
Share

What kind of memory card is used for dash cams?

Currently, the vast majority of dash cams use Micro-SD cards, originally named Trans-flash-Card (TF card), which is a member of the SD-Card Association. Due to their small size, fast transfer speed, and support for hot-swapping, they are widely used in mobile phones, navigation devices, and some automotive electronic products. The dimensions are only 15x11x1mm. Additional information is as follows: 1. How loop recording works: The video footage from dash cams is stored on removable memory cards. Videos are typically segmented into 1, 3, or 5-minute clips based on user settings. When the memory card is nearly full, the dash cam automatically deletes the oldest clip to store newly recorded videos, preventing storage shortages. 2. TF card: The memory card used in dash cams is also called a TF card, short for Trans-flash-Card. It supports hot-swapping, can be rewritten repeatedly, offers fast storage speeds, and is compact in size. These advantages make it widely used in various electronic devices for data storage. It is particularly suitable for the frequent read-write operations of dash cams, enabling the loop recording function. Depending on the size of the memory card, it can continuously loop and store recorded video footage.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.