How to Deal with Abnormal Noise from Door Limiters?

1 Answers
GrantMarie
07/30/25 12:10am
When abnormal noise occurs in the door limiter, the solution is naturally to apply oil. The simplest method is to use lubricating oil such as butter for lubrication and rust prevention. Alternatively, grease can also be used, which is not expensive. Moreover, since hinges and door limiters are frequently used, it is recommended that car owners purchase grease to reduce friction and wear on mechanical components, thereby extending their fatigue life. Relevant information about door limiters is as follows: 1. Introduction: The function of a door opening limiter (Door-check) is to restrict the degree to which the door can open. On one hand, it limits the maximum opening of the door to prevent it from opening too wide. On the other hand, it can keep the door open when needed, such as when the car is parked on a slope or in windy conditions, preventing the door from closing automatically. 2. Basic Classification: According to the method of providing limiting force, they can be classified into rubber spring type, metal spring type, and torsion spring type. According to the type of friction, they can be classified into rolling friction type and sliding friction type.
Was this review help?
18
1
Share
More Forum Discussions

Is it normal to drive with a tire pressure of 3.0?

A tire pressure of 3.0 bar is not suitable for driving. Generally, the normal tire pressure for most cars is around 2.2-2.5 bar, which may vary slightly depending on the vehicle model but usually stays within this range. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, leading to internal cracks or blowouts. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found, drive to a tire shop for repair and then reinflate the tire; If the tire pressure warning reappears after inflation without any visible puncture, it may be due to air leakage caused by a deformed wheel rim. In this case, inspect and replace the wheel rim if necessary.
14
2
Share

Is the Guangqi Honda City's Engine Imported?

The Guangqi Honda City's engine is not imported. It uses a 1.5-liter naturally aspirated engine that incorporates Sino-Japanese joint venture technology. In terms of power, this engine in the Honda City delivers a maximum horsepower of 131ps, a maximum power output of 96kw, and a peak torque of 155nm. Regarding fuel efficiency, the engine has a combined fuel consumption of 5.4L per 100 kilometers. The City can be considered as the sedan version of the Honda Fit, with a front-end design very similar to the new Fit. The lines on the front fenders are quite sharp, and the body features a dual waistline design. The rear styling somewhat resembles the current Honda Crider.
7
4
Share

What are the steps to reset the maintenance light on the Honda URV?

Steps to reset the maintenance light on the Honda URV: 1. Set the URV's power mode to ON mode and ensure the vehicle is in a complete stop state; 2. On the multi-information display screen, press the home button; 3. Select vehicle settings, find the vehicle maintenance information reset option to complete the process. The Honda URV is based on the Honda CONCEPT D concept car. Compared to the GAC Honda Avancier, this vehicle features a U-shaped design formed by the headlight assembly, front grille, and front bumper, complemented by more chrome accents. Additionally, the fog light area and front bumper design have been redesigned.
20
5
Share

What do 4H and 4L mean in four-wheel drive vehicles?

In four-wheel drive vehicles, 4H stands for high-range four-wheel drive, while 4L stands for low-range four-wheel drive. The full name of 4H is 4WD-HIGH, which is used for quickly traversing uneven terrain. The full name of 4L is 4WD-LOW, which is used for low-speed passage through extreme off-road sections. Below are the detailed explanations: 4H: High-range four-wheel drive, suitable for high-speed driving on paved roads, rain or snow-covered surfaces, and can also handle most off-road conditions. It significantly improves stability, traction, and handling, but compared to 2H, it increases fuel consumption. N: The neutral position of the transfer case, equivalent to the neutral position of the transmission. It serves as a transition and buffer when switching driving modes. Placing it in this gear during towing can prevent damage to components. 4L: Low-range four-wheel drive mode. Generally, this mode is available in part-time four-wheel drive systems and some vehicles with strong off-road capabilities, such as the Wrangler, G-Class, and Land Rover Defender. In this mode, torque is amplified through a smaller gear ratio. Some models will automatically lock the central differential lock, rear differential lock, and various electronic assistance systems in this mode. 4L is an option for high-intensity off-roading. For models with 4L and locking differentials, driving on surfaces with good traction in this mode can cause handling difficulties and component damage, and its use is prohibited.
3
2
Share

How to Adjust a Car's Odometer?

Locate the clutch housing of the car. This position varies from car to car, sometimes found on the transmission or drive shaft. Find the odometer sensor plug and gently pull it out by hand. Next, insert the output tab into the signal socket of the sensor plug. Accurately insert the odometer adjuster into the cigarette lighter. Insert the car key and turn it once. Adjust the small knob on the odometer adjuster to set the car's speed to the desired level. When it starts working, the numbers will automatically advance significantly. Approximately 8 hours can automatically increase the mileage by 3000 kilometers. It works very well.
8
5
Share

Is It Necessary to Soundproof a Car?

It is unnecessary to soundproof the car. Because most of the interior components in modern cars are clip-on assemblies, they tend to become loose after disassembly and reassembly. This means that when driving on bumpy roads, there will inevitably be some degree of rattling noise, which would be counterproductive. If the connections are not reinstalled to the factory standards, it may lead to dust leakage. For example: the plastic film inside the door panel is designed to prevent dust ingress. Improper disassembly could cause issues like sluggish window regulator operation or sticky door locks. Replacing it with so-called soundproofing material would definitely not provide the same sealing effectiveness as the original plastic film.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.