How to deal with a sesame-sized paint chip on the car door?

Can a new car be waxed?

New cars should not be waxed because the paint layer of a new car already has a protective wax coating. Waxing too early will remove the original wax on the surface of the new car, causing unnecessary waste. Generally, there is no need to rush to wax a new car within five months of purchase. The functions of waxing and preparations before waxing are as follows: Functions of waxing: To protect the car paint, making it look more vibrant and extending its lifespan. Waxing is the simplest, cheapest, and most cost-effective method of car paint protection, but it has a short duration and requires frequent application. Other options include glaze sealing, coating, and crystal coating, which are relatively more expensive but last longer. Preparations before waxing: You can go to a beauty shop for polishing and waxing. Before waxing, perform a polishing treatment first, then apply wax, which can remove scratches. However, this should not be done frequently, as polishing can cause some damage to the car paint.

20

5

Share

Common Types of Cars During the Republic of China Era

Here is an introduction to the common cars during the Republic of China era: 1. Ford Model T: When it comes to the Ford Model T, those familiar with automotive history will certainly recognize it. Produced by the Ford Motor Company starting in 1908, this lightweight family car was the world's first vehicle to use standardized parts and be assembled via mass production on an assembly line. It was relatively affordable, stylish, and fuel-efficient, consuming only about 7-8 liters per 100 kilometers. While such fuel efficiency may not seem impressive today, it was groundbreaking at the time, easily outperforming all competitors. For context, the average fuel consumption of a 1930 Citroën sedan was over 10 liters per 100 kilometers, while the 1931 domestically assembled Minsheng-brand truck in China averaged 30 liters per 100 kilometers (with a payload of just 1.8 tons). 2. Minsheng Model 75 Truck: China's automotive industry started late. In 1928, Marshal Zhang Xueliang, then in charge of Northeast China's military and political affairs, allocated 800,000 silver dollars for an attempt to manufacture cars. After three years of effort and with the help of foreign engineers, a light truck was assembled—its engine and all electrical components were imported. In 1932, the Shanxi Automobile Repair Factory produced a Shanxi-brand car, though all core components were imported. In 1936, the Hunan Machinery Factory rolled out the first domestically produced bus, labeled as 'domestic' but still assembled from imported parts. Until the founding of the People's Republic of China in 1949, not a single 'independently developed' car was produced. 3. Ford Cars: The 1927 Rolls-Royce Phantom I could reach speeds of up to 120 km/h but was prohibitively expensive; only one existed in China, owned by a foreigner. The 1929 Bentley Blower, capable of 160 km/h and considered the fastest in the world, was equally expensive and never made it to China during the Republic of China era. The only luxury car accessible to a very few Chinese was the Lincoln. The dominant car brands in the market were Ford, Chevrolet, and Citroën. In 1932, global car sales totaled 70,000 units, with Ford selling 30,000, Chevrolet and Citroën combined selling 20,000, and all other brands together accounting for the remaining 20,000.

8

2

Share

What is the function of antifreeze in summer?

Antifreeze plays roles in corrosion prevention, evaporation resistance, and cooling heat dissipation during summer. The main functions of antifreeze are as follows: 1. Cooling function: Cooling is the basic function of antifreeze. When the engine is running, it generates a large amount of heat, with about 60% of this heat being dissipated into the surrounding space through the cooling system. 2. Antifreeze function: In winter, when temperatures are low, antifreeze is added to the engine coolant to lower the freezing point of water, ensuring the cooling system does not freeze in cold weather and allowing the car to continue operating. 3. Anti-corrosion function: The engine and its cooling system are made of metals such as copper, iron, aluminum, steel, and solder. These metals can corrode and rust over time when exposed to water at high temperatures. Antifreeze not only prevents corrosion to the engine cooling system but also has anti-corrosion and rust removal capabilities.

10

3

Share

Is the Lexus UX engine imported?

Lexus UX engine is imported. The engine model for the hybrid version is M20AFXS, and for the gasoline version, it is M20AFKS. The Lexus UX offers a 2.0L naturally aspirated engine and a 2.0L hybrid system. The 2.0L naturally aspirated engine has a peak torque of 207nm, paired with a DirectShift CVT transmission that can simulate 10 speeds. The Lexus UX is the brand's first compact SUV, with body dimensions of 4494mm in length, 1840mm in width, and 1520mm in height, and a wheelbase of 2640mm. In terms of exterior design, the Lexus UX follows the family-style design, appearing very youthful and stylish. The front grille is notably large, covering almost the entire front face, with a blackened mesh pattern and distinctive styling, exuding a strong sporty vibe.

3

4

Share

What is the starting RPM for a car?

For most family cars, the starting RPM is around 1000-1500. Below are the starting procedures for automatic transmission cars and manual transmission cars: Starting procedure for automatic transmission cars: After sitting in the driver's seat, press the start button to turn on the ACC light; press the start button again for the vehicle to perform a self-check; press the brake and the start button to ignite and start the engine; press the foot brake, shift to D gear, and release the handbrake. Starting procedure for manual transmission cars: After sitting in the driver's seat, press the clutch and turn the key to the ACC position, wait for about 3 to 5 seconds, then turn to the START position to ignite; press the clutch, shift to first gear, and release the handbrake.

10

4

Share

Can Internal Personnel at the Vehicle Management Office Alter Test Results?

No, altering test results without authorization is illegal. Below is relevant information: Vehicle Management Office: The Vehicle Management Office, officially known as the Vehicle Administration Office, is primarily responsible for handling vehicle registration, modification, transfer, mortgage, and cancellation. Relevant Regulations: When processing vehicle registration, driver examinations, and licensing, the Vehicle Management Office must use a business process record form (hereinafter referred to as the "Process Record Form") to document the handling of vehicle registration and driver examinations/licensing. Upon completion of each task, the responsible personnel must sign the "Process Record Form." The supervisory or leadership personnel must note clear handling opinions on the "Process Record Form" when addressing issues reported by various positions. The "Process Record Form" is archived in the vehicle and driver records.

11

5

Share

How to deal with a sesame-sized paint chip on the car door?

Can a new car be waxed?

Common Types of Cars During the Republic of China Era

What is the function of antifreeze in summer?

Is the Lexus UX engine imported?

What is the starting RPM for a car?

Can Internal Personnel at the Vehicle Management Office Alter Test Results?

What is the recommended tire pressure for a car's spare tire?

Will points be deducted if I stop after crossing the stop line at a traffic light?

What Causes Abnormal Noise from Car Brake Discs?

Why Are There Many Second-hand Zontes 310V Transfers?