···
Log in / Register

How to Deal with a Scratched Chassis on a BAIC New Energy Vehicle?

4 Answers
McPenelope
08/26/25 6:00am
Need to drive the damaged vehicle to a local repair shop, use a lift to raise the vehicle, and inspect the damaged area of the chassis. If any parts have been scratched, they should be promptly inspected, repaired, or replaced.
Was this review help?
10
1
Share
SilasAnn
09/08/25 8:36am
A few days ago, I experienced an undercarriage scrape when driving my BAIC New Energy vehicle home. Suddenly, I scraped against the curb, which made me quite nervous. I immediately pulled over and turned off the engine. The undercarriage of a new energy vehicle usually houses the battery pack, and any impact could damage it, leading to risks like short circuits or electric leakage. I quickly got out to inspect the exterior for any obvious deformations or fluid leaks. If you notice the battery casing is dented, you must not continue driving and should call the 4S store or a professional repair shop for help. They have specialized tools to check the battery's condition. Always pay attention to road conditions while driving, and slow down in rough or uneven areas. Electric vehicle repairs can be complex, so it's advisable to regularly check if the undercarriage protective plates are loose to reduce such risks. Handle such situations carefully—don’t attempt DIY repairs. Safety comes first.
Was this review help?
16
1
Share
Expand All
JustinRose
10/22/25 8:44am
I usually drive an electric car to commute, so I have to be very careful with undercarriage scrapes. If this happens, the first step is to stop the car, turn off the engine, and turn on the hazard lights to ensure safety. Then, bend down to check if there are any obvious scratches or damage to the undercarriage, especially around the battery area. BAIC New Energy vehicles usually have protective measures, but a hard impact might damage internal wiring. If you can clearly see that there's no major issue, you can drive slowly to a nearby inspection point; otherwise, call for a tow truck. Don’t delay—battery issues can be minor or serious. I once heard a mechanic say during maintenance that frequent scrapes can corrode the undercarriage and shorten its lifespan. So, always try to park on flat ground and occasionally consider installing undercarriage armor for extra protection. Remember, early intervention means peace of mind.
Was this review help?
19
2
Share
Expand All
EmilioDella
12/06/25 2:18am
When dealing with similar issues, I always remind myself not to be careless. For new energy vehicle undercarriage impacts, the most critical thing is to prevent battery leakage. First, stop the car and inspect. If you hear unusual noises or smell strange odors, immediately leave the vehicle and call for help. Electric vehicle battery packs are located at the bottom, and impacts may compress the battery cells, leading to thermal runaway risks. I recommend a visual assessment: if there's no deformation, drive slowly to a repair station; if there's damage, contact a professional shop immediately. They can scan the battery's health and replace it if necessary. During regular maintenance, check the undercarriage height and protective layer to reduce the chance of impacts. Slow down when driving over speed bumps to avoid hard landings.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

Where is the hood release handle on a BMW Mini?

Opening the car hood is a frequently performed operation during vehicle use, whether for routine maintenance or troubleshooting. Car Hood: Opening the car hood is a common operation in vehicle usage, whether for daily maintenance or fault inspection. It's essential to know how to open the car hood yourself. The method to open the hood is generally the same for almost all cars—you just need to locate the control switch inside the vehicle. Specific steps are as follows: First, open the car door and enter the driver's seat. Locate the hood release switch under the left side of the driver's seat. Then, pull it upward firmly to release the hood latch. You will hear a 'click' sound, indicating the latch is released. After that, step out of the car to check if the front hood is slightly open—a visible gap means it's unlocked. Finally, move the safety catch aside to fully open the hood. Lift the support rod and secure its top clip onto the hood to hold it in place.
3
3
Share

What are the reasons for the decrease in braking force of hydraulic retarders?

The reason for the decrease in braking force of Voith hydraulic retarders is: current drop: an increase in the gap between the stator and rotor or prolonged operation time may lead to a decrease in braking force. The following are related content introductions: 1. Retarding efficiency: The retarding efficiency is higher than that of engine retarders, allowing downhill driving at higher speeds; small size and mass, can be integrated with the transmission. 2. Wear: No wear occurs during operation; the heat generated by the working fluid is easily dissipated, and the normal working temperature of the engine can be maintained during long downhill driving. 3. Braking torque: The braking torque tends to zero at low speeds, and wheels will not slip during braking on slippery roads. The disadvantages are long lag times for engagement and disengagement, power loss when not in operation, and complex structure when used in mechanically driven vehicles, especially in trailers.
12
4
Share

Should Vehicles Drive on the Right Side in China?

According to China's Road Traffic Safety Law, motor vehicles and non-motor vehicles must drive on the right side, while pedestrians should walk on sidewalks. If there are no sidewalks, pedestrians should walk on the side of the road. Based on road conditions and traffic needs: Roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians must travel in their respective lanes. If the road is not divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides. When driving on the road: Motor vehicles must not exceed the maximum speed indicated by speed limit signs. On roads without speed limit signs, drivers must maintain a safe speed. When driving at night, on dangerous road sections, or in adverse weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads, drivers should reduce their speed.
4
2
Share

What are the precautions for car maintenance?

Precautions for car maintenance include: 1. Air conditioning must be cleaned and maintained: In summer, the air conditioning operates under high load, and frequent rain means cars often drive through waterlogged roads, causing the lower part of the air conditioning condenser to accumulate mud and sand. Over time, this can lead to rust on the condenser, shortening its lifespan. Therefore, a thorough maintenance of the air conditioning system should be performed in autumn. Additionally, pay attention to the maintenance of the heater pipes and fan. As the weather cools in autumn, frost may appear when temperatures drop. During this season, it's crucial to ensure that the defrost vents below the windshield are functioning properly and providing sufficient heat. If any issues arise, they should be addressed promptly to avoid unsafe driving conditions. 2. Replace tires with shallow treads in time: High summer temperatures require frequent checks of tire pressure to prevent overinflation and blowouts. In autumn, as temperatures drop, tire pressure should be replenished to maintain it within the specified range. Also, inspect tires for scratches, as rubber tends to harden in autumn and winter, making tires more prone to leaks or punctures.
6
2
Share

How Many Kilometers for One Regeneration Under China VI Standards?

When the vehicle has completely consumed two tanks of gasoline, the regeneration indicator light on the dashboard will illuminate. Regeneration typically takes about 5 minutes, though the required time may vary for different vehicle models. During regeneration, it is advisable to find a well-ventilated and open area. After pressing the regeneration button, the vehicle will automatically increase its RPM to process, requiring no driver intervention. China VIa: China VIa serves as a transitional phase between "China V" and "China VI" standards. China VIa will be implemented for gas-powered vehicles on July 1, 2019, for urban vehicles (such as city buses, sanitation trucks, postal vehicles, etc.) on July 1, 2020, and for all vehicles on July 1, 2021. China VIb: China VIb represents the true "China VI" emission standard. China VIb will be implemented for gas-powered vehicles on January 1, 2021, and fully implemented for all vehicles on July 1, 2023.
12
5
Share

Where is the folding motor for the Subaru Outback's side mirror located?

The folding motor for the Subaru Outback's side mirror is located at the junction between the mirror's tail and the car body. Subaru Outback Classification: The side mirror folding function refers to the ability of the car's side mirrors to fold and retract when necessary, which can be either manual or electric. Function and Purpose: During driving, vehicles are prone to minor accidents. As the widest component installed on the vehicle, side mirrors are most susceptible to impact in case of a scrape. To minimize damage, side mirrors need to have a folding function. Folding side mirrors can retract when passing through narrow sections, improving the vehicle's maneuverability. When the driver leaves the car, the side mirrors can also be folded, not only protecting the mirror surface but also reducing parking space, effectively avoiding scratches. Subaru Outback Advantages: The advantage is that the driver can fold the mirrors from inside the car, and the mirrors automatically unfold when the vehicle is started.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.