How to deal with a punctured motorcycle tire?

Must spark plugs be replaced after 60,000 kilometers?

Spark plugs need to be replaced after 60,000 kilometers of use. Methods to determine if spark plugs are damaged: Remove the spark plugs and observe them. Judge the condition of the spark plugs based on their appearance and color. Normal spark plugs have an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, an electrode gap between 0.8-0.9mm, and no signs of electrode burn. If the spark plugs are covered with oil or deposits but are not damaged, they can continue to be used after cleaning off the oil and deposits. If the spark plugs are severely damaged, with signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plugs with new ones. Additionally, if the spark plugs appear black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, with oil seeping up.

9

0

Share

Why does an Audi car have engine RPM but won't move when stepping on the accelerator?

Audi car having engine RPM but not moving when stepping on the accelerator is caused by insufficient oil pressure or poor fuel pump performance. Removing throttle valve sludge: Sludge forms due to carbon deposits from fuel combustion exhaust accumulating on the throttle valve, combined with impurities not filtered by the air cleaner. Excessive sludge can cause air blockage, leading to fuel pump malfunctions; Cleaning injector carbon deposits: Since the combustion chamber is prone to carbon buildup, which can cause starting difficulties, injector carbon deposits may also lead to fuel passage blockage, distorted fuel injection, and poor atomization, resulting in reduced oil pressure. When there's RPM but no speed increase after stepping on the accelerator, the causes need to be checked one by one. You may choose to have it inspected at a specialized repair station.

6

5

Share

What are the reasons why the Honda CRV suddenly cannot start after parking?

The reasons why the Honda CRV suddenly cannot start are as follows: Battery depletion: The characteristic symptom is that the starter begins to turn but the rotation speed is insufficient, i.e., it lacks power, and later the starter only makes a clicking sound without turning. Low temperatures in winter and forgetting to turn off certain electrical devices can cause the vehicle to fail to start, especially when used for short, low-speed trips over a long period in winter, the battery voltage may drop below the rated value, making it impossible to start or operate normally. Gasoline flow obstruction: The characteristic symptom is that there is no oil pressure in the engine fuel supply pipe. This situation often occurs on particularly cold mornings, caused by long-term dirt accumulation in the fuel pipeline. When the temperature is extremely low, water and debris mix, blocking the fuel pipeline, resulting in failure to start. Ignition system: The characteristic symptom is that on particularly cold days, due to low intake air temperature, the fuel does not atomize well in the cylinder. If combined with insufficient ignition energy, the result is cylinder flooding, where excessive fuel accumulates in the cylinder, exceeding the ignition limit concentration and preventing the engine from starting.

18

0

Share

What are the differences between Honda 400X and 400F?

Geely Emgrand GL can close windows remotely after engine shutdown. Opening windows: Press the button to the first detent position (excessive force will reach the second detent), release when the window reaches the desired position. Pressing the button harder to the second detent position will automatically fully lower the window; Closing windows: Pull the switch to the first detent and hold until the window reaches the desired position. Slightly harder pull to the second detent will automatically raise the window. Owners can also control one-touch window operation via the lock/unlock buttons on the key fob: Hold the lock button for over 3 seconds to close all windows; Hold the unlock button for over 3 seconds to open all windows; Manual activation: Before setting, start the engine. Hold the armrest button down for 5 seconds until fully lowered, then hold up for 5 seconds until fully raised. After this learning process, the function will be activated.

15

3

Share

How long does it take for fuel consumption to return to normal after cleaning the throttle body?

After cleaning the throttle body, it generally takes about 50KM to see if fuel consumption returns to normal. Here is some relevant information about fuel consumption: Fuel consumption per 100 kilometers: This refers to the amount of fuel consumed by a vehicle traveling a hundred kilometers at a certain speed on the road. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer under objective conditions using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated based on specified speeds to derive the theoretical experimental fuel consumption data per 100 kilometers for the model. Road condition fuel consumption: Road condition fuel consumption is a fuel indicator calculated by repeatedly testing the values measured when a vehicle travels on specified roads at specified speeds and times, also known as multi-condition road cycle fuel consumption. The standard specifies that each cycle includes various driving conditions and records driving conditions based on various indicators such as specified gear shift times, parking times, driving speeds, acceleration, braking, and deceleration in each cycle. The values measured by this method are relatively close to actual values.

20

1

Share

Can the remote control close the windows after the Geely Emgrand GL is turned off?

Geely Emgrand GL can close the windows with the remote control after the engine is turned off. Opening the windows: Press the button to the first gear position. Excessive force will reach the second gear. Release the button when the window moves to the desired position. Press the button firmly to the second gear position, and the window glass will automatically lower completely to open. Closing the windows: Pull the switch to the first gear and hold it until the window moves to the desired position. Pull the button slightly harder to the second gear, and the window will automatically rise. The owner can also control the one-touch up and down of the windows using the lock and unlock buttons on the key. Hold the lock button for more than 3 seconds, and all windows will rise and close. Hold the unlock button for more than 3 seconds, and all windows will lower and open. Manual activation: The button on the armrest needs to be activated before setting. Start the engine, hold the switch down for 5 seconds without releasing, then hold it up for 5 seconds and release. After the learning is completed, it can be activated.

9

5

Share

How to deal with a punctured motorcycle tire?

Must spark plugs be replaced after 60,000 kilometers?

Why does an Audi car have engine RPM but won't move when stepping on the accelerator?

What are the reasons why the Honda CRV suddenly cannot start after parking?

What are the differences between Honda 400X and 400F?

How long does it take for fuel consumption to return to normal after cleaning the throttle body?

Can the remote control close the windows after the Geely Emgrand GL is turned off?

Will a Slightly Flood-Damaged Vehicle Be Greatly Affected?

How to Open a Cruze Key?

Does a Lightweight Moped Belong to Motor Vehicles or Non-Motor Vehicles?

Where is the USB port of the Buick Regal?