How to Deal with a Locked Geely Steering Wheel?

2 Answers
LaDaniel
07/25/25 1:26pm
There are several solutions for a locked Geely steering wheel. Here are the relevant details: 1. First, insert the key, press the brake, then turn the steering wheel left and right. While turning the steering wheel, twist the key to complete the steering wheel unlocking procedure. 2. If you are not skilled, don't worry if it doesn't work the first time. Pull out the key and repeat the above steps 1-2 times, and you should be able to unlock it successfully. Reason for the steering wheel locking: The main reason the steering wheel locks is that the steering wheel was turned when the key was removed after the last engine shutdown. At this point, the car's security anti-theft system assumes there is a risk of theft, so the system locks the steering wheel to prevent the vehicle from being stolen.
Was this review help?
12
2
Share
Donna
08/11/25 8:45pm
I encountered a steering wheel lock issue while driving my Geely car, which is usually triggered by the anti-theft system. The solution is to insert the key or prepare the start button after getting in the car, then gently turn the steering wheel left and right while turning the key or pressing the start button to synchronize and unlock both. If the key won't turn, try replacing the battery, as low power can weaken the signal. If that doesn't work, apply slight pressure but avoid forcing it to prevent damage to the steering column. This is common in Geely cars due to the anti-theft mechanism design. To prevent lock-ups, always straighten the steering wheel before turning off the engine. If the issue persists, don't panic—contact a Geely 4S shop or professional towing service for inspection of the lock mechanism or steering system. Safety first: avoid driving when the wheel is locked to prevent accidents.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

How Many Months After Production is a New Car Considered a Stock Vehicle?

A new car is considered a stock vehicle if it has been in storage for more than 6 months after production. Here are methods to distinguish between a new car and a stock vehicle: 1. Check the manufacturing nameplate: Located below the B-pillar on the right side of the vehicle, the nameplate displays information such as the production date and engine parameters. 2. Inspect the glass: The production date and year of the glass are usually marked on the car windows. 3. Examine the tires: Determine the production time by checking the manufacturing date on the tires. 4. Look under the hood: Open the engine compartment to check if it is clean. Additional tips: When purchasing a car, pay attention to the brand and model, review the contract carefully, ensure all relevant documents are complete, inspect the exterior paint and interior for any damage, verify that the production date on the nameplate matches the documents, check if the engine operates normally, and confirm that basic vehicle functions are working properly.
2
3
Share

Consequences of a Bottle Cap Falling into the Engine Compartment

A bottle cap falling into the engine compartment will not affect normal driving. Additional information about the engine compartment is as follows: 1. The engine compartment generally includes the engine, air filter, battery, engine exhaust system, throttle, coolant reservoir, relay box, brake booster, throttle cable, windshield washer fluid reservoir, brake fluid reservoir, fuses, etc. 2. The engine compartment serves as a protective cover for the engine and is a crucial aspect of new car inspection. 3. Inspecting the engine compartment is very important. It is necessary to carefully check the tightness between the fenders and also inspect for oil leaks inside the engine compartment, loose wiring terminals, and other issues.
13
0
Share

What is the ampere rating of a motorcycle fuse?

Fuses are available in 10A, 15A, and 20A ratings, as specified in the original vehicle manual. Here is relevant information: 1. When measuring charging voltage, the battery should be installed on the vehicle. Start the engine and increase the throttle. For vehicles with half-wave rectification, the charging voltage should be around 13.5V, while for full-wave or three-phase rectified DC types, the charging voltage should exceed 14V. Otherwise, the charging is insufficient. If the fuse is disconnected during measurement, the rectifier will assume there is no battery in the circuit and limit its output to protect electrical components, resulting in a measurement of around 6V. 2. If the vehicle is used infrequently, the battery may remain in a discharged state, which can damage its lifespan over time. It's advisable to check for any electrical discharge points in the vehicle's circuit, including installed anti-theft alarms, which can also self-discharge. Of course, the battery itself might not hold a charge, in which case replacement is necessary.
7
1
Share

What Causes High Engine Oil Temperature?

The reasons for high engine oil temperature are as follows: High engine oil temperature may be caused by insufficient oil level or excessive oil level; malfunction of the oil pump, or insufficient oil pumping; excessively high cooling water temperature, blockage of the oil cooler; or blockage of the oil filter. Extension: 1. Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction in the engine, assist in cooling and temperature reduction, provide sealing and leak prevention, prevent rust and corrosion, and act as a shock absorber. 2. It is hailed as the 'blood' of the automobile. Engine oil consists of two parts: base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve the shortcomings of the base oil's performance, imparting new characteristics, making them an essential part of the lubricant.
9
2
Share

What Causes Water Leakage in a Car?

Water leakage in a car can be caused by the following reasons: 1. Condensation water dripping from the air conditioning system during use. 2. A malfunction in the radiator cooling system causing water leakage underneath the car. 3. Possible windshield washer fluid leakage; check the washer fluid reservoir, hoses, and connections for looseness or damage. Here are some methods to inspect and troubleshoot the issue: 1. Check if the radiator coolant is low, then inspect the cooling system hoses for looseness or damage, and look for any scratches or damage at the bottom of the radiator. 2. Ensure the coolant reservoir is not overfilled, as it may overflow when the temperature rises. 3. Inspect the windshield washer fluid reservoir, hoses, and connections for looseness or damage. 4. Determine if the dripping is caused by condensation water discharge from prolonged air conditioning use in hot weather, which is a normal phenomenon.
19
0
Share

How Long Can Fully Synthetic Engine Oil Be Used?

Fully synthetic engine oil has the following shelf life: 1. When sealed, engine oil generally lasts within 5 years, and fully synthetic oil falls within this range. However, once opened, the oil deteriorates faster and should ideally be used within one year. 2. Do not use expired engine oil, as its chemical composition may have changed, potentially harming the engine. Here are methods to determine if fully synthetic oil has deteriorated: 1. Fully synthetic oil should appear clear, semi-transparent, or transparent. If oxidized, its color may change. 2. If the oil smells sour or foul, it has likely deteriorated. If its viscosity changes significantly (thinning or thickening) or appears uneven, it should no longer be used. 3. Qualitative filter paper test: Filter papers come in fast, medium, and slow types, requiring 4 hours, 8 hours, and 24 hours, respectively, from oil droplet application to result observation.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.