How to Deal with a Faulty Tire Pressure Monitoring System?

2 Answers
DiHarrison
07/25/25 3:05pm
The methods to handle a faulty tire pressure monitoring system are: 1. Display the tire pressure and temperature readings on the dashboard and check for any abnormalities; 2. Inspect the underinflated tire for any leaks; 3. Examine whether the tire pressure monitor is malfunctioning. The causes of a faulty tire pressure monitoring system include: 1. A punctured tire; 2. Prolonged driving or failure to replenish tire pressure in time; 3. Malfunction of the tire pressure sensor; 4. Failure to reset the tire pressure module after tire replacement or repair. The functions of the tire pressure monitoring system are: to prevent accidents, extend tire lifespan, and reduce wear on the suspension system.
Was this review help?
19
3
Share
LylaDella
08/11/25 9:19pm
During my last road trip, the tire pressure warning light suddenly started flashing. I immediately pulled over to a safe area and checked each tire one by one. Turns out the right rear tire had a nail causing a slow leak. After putting on the spare tire, I drove to a repair shop where it cost me 20 yuan to fix it. Actually, in most cases, it's just a nail puncture causing air loss - I recommend keeping a portable air pump for emergencies. If the warning light comes back a couple days after inflating, it's probably just the sensor battery dying - replacing a new sensor costs around a hundred yuan. Remember to ask the technician to reset the TPMS after tire repairs, otherwise the warning light will stay on. With hot weather increasing blowout risks now, weekly tire pressure checks are essential.
Was this review help?
8
0
Share
Expand All
More Forum Discussions

Are Car Sunshades Useful?

Sunshades have both advantages and disadvantages, and can be chosen based on needs. Advantages of sunshades: Protect the dashboard from damage such as cracking and aging caused by direct sunlight exposure, while also reducing the interior temperature, indirectly improving the effectiveness of the car's air conditioning; during the day, they prevent reflection and reduce sunlight refraction on the windshield that can create glare, ensuring clear driving visibility; at night, they minimize light refraction, reducing blind spots caused by roadside lights reflecting off the dashboard onto the windshield. Disadvantages of sunshades: The dashboard is a high-temperature area that requires better heat dissipation. Using multiple covers in the summer when interior temperatures are already high can impede heat dissipation. When wind blows onto the dashboard, dust trapped in the sunshade can flow back with the wind directly into the faces of front-seat occupants. Precautions for using sunshades: Some dashboards are made of soft plastic, and using sunshades with poor-quality adhesive strips may cause corrosion. Always purchase genuine sunshades or opt for non-adhesive sunshades with good anti-slip effects; choose vehicle-specific sunshades and ensure they leave necessary gaps to avoid interfering with safety features like airbags; if a sunshade emits odors after prolonged sun exposure, it may be a substandard product and should be replaced immediately.
15
2
Share

Can 114 be used to inquire about car owner's phone number?

114 can be used to inquire about car owner's phone number. Introduction to 114: 114 refers to a platform that provides number information services to users. In the northern regions, it is operated by China Unicom, while in the southern regions, it is operated by China Telecom. China Unicom's 114 directory assistance can be directly dialed by calling 114 or 116114 in the northern regions. China Telecom's 114 directory assistance can be directly dialed by calling 114 or 118114 in the southern regions. Services provided by 114: Voice number announcement (voice broadcast): Enterprises and institutions (including private business owners) can publish their introductions, commercial information, or product information on the 114 platform. Brand inquiry: When users request a number inquiry based on legally registered brands or trademarks, the 114 platform can provide the phone numbers of the corresponding manufacturers, affiliated companies, or franchise stores that have registered for this service. Inquiry transfer: The 114 directory assistance can directly transfer the call to your phone, eliminating the need for the inquirer to dial a second time. Temporary number announcement: Businesses can temporarily publish phone numbers used for promotional purposes in the 114 system. Corporate sponsorship: When customers dial 114 for number inquiries, a 'sponsorship guide tone' can be played before the automatic voice announcement.
14
2
Share

Is It Necessary to Install Sealing Strips on a New Car?

It is necessary to install sealing strips on a new car. The door sealing strip is a product that seals the door, making it harder to open, and serves functions such as shock absorption, waterproofing, sound insulation, heat insulation, dust prevention, and fixation. Functions of Door Sealing Strips: Door sealing strips (auto-door-rubber-seal-strip) are mainly used for fixing, dust prevention, and sealing of car doors. They feature good elasticity, resistance to compression deformation, aging, ozone, and chemical effects. Equipped with unique metal clamps and tongue-shaped buckles, they are sturdy, durable, and easy to install. Primarily applied on door panels, door frames, side windows, front and rear windshields, engine hoods, and trunk lids, they serve functions such as waterproofing, dust prevention, sound insulation, temperature insulation, shock absorption, and decoration. Fuel-Saving Tips During the New Car Break-In Period: Avoid driving with excessive load during the break-in period of a new car; the lighter the body, the better, as heavy loads can cause damage to the car. Do not let the engine rev too high; generally, keep the RPM below 3,000, or below 3,500 for automatic transmissions. Avoid maintaining a single gear for too long or driving at low speeds for extended periods; gradually increase the speed instead.
18
2
Share

Which direction do the wheels turn when steering left?

When moving forward, turning the steering wheel left makes the vehicle turn left; turning it right makes the vehicle turn right. When reversing, turning the steering wheel left makes the rear of the vehicle move left; turning it right makes the rear move right. For a forward-moving vehicle, turning the steering wheel left causes the vehicle to turn left. When reversing, turning the steering wheel left makes the front wheels turn right while the rear wheels remain unchanged, causing the vehicle to move backward to the left. Below are detailed instructions on steering: Requirements for steering: Beginner drivers should first sit upright and steady, adjust the seat properly, and grip the steering wheel firmly with both hands. Hold the steering wheel at the 9 o'clock and 3 o'clock positions, or slightly higher depending on personal preference. Steering techniques: When turning during driving, if turning left, the left hand should exert force while the right hand assists. When straightening, the right hand exerts force while the left hand assists. If turning right, the right hand exerts force while the left hand assists, and when straightening, the left hand exerts force while the right hand assists. When making a U-turn, always cross your hands while steering—avoid turning the wheel bit by bit (commonly known as "feeding the wheel"), as this can lead to confusion and loss of control in emergencies. Avoid turning the wheel while stationary or turning it to the full lock, as this can cause tire wear and increase stress on the vehicle's steering system.
17
3
Share

What does the 'W' on the license plate represent?

License plates starting with the letter 'W' indicate that they are Armed Police license plates, where 'W' is the first letter and the second letter is 'J'. Below is some extended information about license plates: 1. A license plate is a plate hung on the front and rear of a vehicle, typically made of aluminum, iron, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information. 2. The vehicle license plate serves as the 'ID card' of the vehicle, an important piece of information that distinguishes it from other motor vehicles. With the rapid increase in the number of vehicles, license plates have undergone significant changes, and the advancement of high-tech has led to increasingly higher demands for intelligent vehicle license plates. License plates are used to number and register information for various vehicles, with their primary function being to identify the region to which a vehicle belongs and to access the vehicle's registration details based on the license plate. 3. The first character of a license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered; the second character is an English letter representing the prefecture-level administrative region, usually the city where the vehicle is registered. The ranking of letters is generally determined by the provincial vehicle management office based on the status of each prefecture-level administrative region, with the letter 'A' assigned to the provincial capital, and the subsequent letters ranked without any particular order.
12
2
Share

What are the performance characteristics of brake fluid?

The performance of brake fluid lies in its ability to ensure vehicle braking safety and provide excellent corrosion resistance. Introduction to brake fluid: Brake fluid is a high-concentration liquid with strong water absorption capacity. After being used for a period of time, its water content gradually increases. Brake fluid should be replaced every 2 years or every 40,000 kilometers driven. Alternatively, professional instruments can be used to measure the water content of the brake fluid. If it exceeds 5%, it should be replaced as soon as possible, otherwise it may affect driving safety. Precautions for brake fluid replacement: During the brake fluid replacement process, if air enters the oil pipe, the brakes may feel softer after replacement, potentially causing delayed braking or even brake failure. The complete drainage method can be used to replace brake fluid: open the bleeder valve of the brake caliper, start the engine, and repeatedly press the brake pedal until no oil comes out of the bleeder valve, then tighten it. Add new fluid to the reservoir, repeatedly press the brake pedal until firmness is felt, then loosen the caliper bleeder valve to drain fluid. When the pedal lowers, quickly tighten the valve. Repeat this process twice until no air bubbles emerge from the discharged fluid. Always check the fluid level in the reservoir to ensure it doesn't drop below the minimum mark.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.