···
Log in / Register

How to Deal with a Detached Sunroof Fabric?

4 Answers
Lucy
07/29/25 3:01am

Purchase a specialized automotive adhesive or bonding product and simply reattach it. For large areas of detachment in the middle, the headliner needs to be removed. It can be easily detached from the edge buttons, and then reattached.

Was this review help?
1
4
Share
DiLucille
08/12/25 1:18pm

A detached sunroof shade cloth can indeed be frustrating, and I've encountered this issue before. First, avoid opening the sunroof in a hurry to prevent further damage to the fabric. I usually recommend checking if the sliding tracks on both sides of the shade are jammed—try gently pulling by hand to see if it can be repositioned. Sometimes, it's just a loose metal clip in the track, which can be hooked back into place with a small tool. If the shade has completely fallen off, inspect the clips on the back for any breaks. As a temporary fix, you can use strong fabric-based tape to secure the edges, but this isn’t a long-term solution. I’d advise visiting an auto repair shop to replace the entire sliding track assembly, which typically costs around 300-400 RMB. While there, have them clean out any sand or leaves in the sunroof tracks—this small job usually takes about half an hour and is much cheaper than replacing the entire shade at the dealership. To minimize wear, always retract the shade before closing the sunroof.

Was this review help?
2
5
Share
Expand All
LeilaLynn
10/02/25 5:10am

I know exactly how it feels when the sunroof shade falls down. Last summer, mine suddenly dropped while I was driving, and the scorching heat rushed right into the car. Whatever you do, don't force the sunroof up or down—you could damage the motor. If you're handling it yourself, grab a flat plastic ruler or an old bank card and gently slide the shade back into place along the track groove, just like installing window film. If any plastic clips break off inside the track, carefully remove them with needle-nose pliers. Many people overlook that the shade's tracks need lubrication—a quick spray of window lubricant helps. If you can't get it back in, use wide tape to temporarily secure the fabric to the roof, but opt for light-colored tape to avoid heat absorption. Next time you service the car, have the mechanic check the sunroof mechanism—these shades typically last about five years.

Was this review help?
16
4
Share
Expand All
DelTeagan
11/15/25 6:54am

The sunshade cloth falling off is mostly due to aging plastic clips or deformed sliding rails. Open the sunroof liner, and you'll usually find four screws securing the track. A common issue is the wear of nylon sliders on both sides. If you're handy, you can remove and replace them yourself—the parts cost just a few dozen yuan. Be mindful of the sunroof drainage tube's position to prevent water from leaking into the cabin. For temporary driving, place a reflective sunshade under the sunroof to deflect sunlight. Modification shops can order sunshades of different thicknesses, but make sure to verify the car model to avoid size mismatches.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

What are the three red, green, and blue stripes on the front of a BMW?

The three stripes on the front grille of a BMW each have a unique meaning. For example, blue represents Bavaria, the headquarters of BMW, green represents the combination of M cars and motorsport, and red represents motorsport. Expansion: The three-color stripes on the front of a BMW are a symbol of identity, representing the BMW M series and its high-performance versions. It is precisely because of these three distinctive stripes that BMW cars have become highly popular, leading many other manufacturers to imitate them. Today, on the streets, besides BMWs, many other cars also feature three colored stripes on their front. Many car owners, in order to attract attention, have added three colored stripes similar to those on BMWs to the front grilles of their beloved cars, enhancing their fashionable appearance and creating a sense of style and sportiness.
3
1
Share

What are the reasons for the non-display of the reversing image in the Mercedes-Benz E300L?

Reasons for the non-display of the reversing image in the Mercedes-Benz E300L: 1. Wiring issues: It is highly likely due to poor wiring connections. It is necessary to promptly inspect the wiring and the connection points installed in the vehicle to check for any loose connections. If found, simply secure the loose connections properly. 2. Video power cable issues: It could also be due to aging of the video power cable. Try replacing it with a new one. 3. Chip issues: Prolonged use of the reversing camera may lead to poor light sensitivity of the chip, resulting in a snowy image or, in severe cases, the black screen issue mentioned today. 4. Hardware issues: Damaged hardware can only be handled by a mechanic.
13
1
Share

Will Parking the Car Outside During a Heavy Rainstorm Have Any Impact?

Parking the car outside during a heavy rainstorm will have an impact. Here are the relevant details about the effects of heavy rain on the car: 1. The car's paint surface can be corroded: In many areas, pollution is widespread, and some places are heavily polluted, so the rain that falls is mostly acid rain. Therefore, rain exposes the car's paint directly to acid rain, which can corrode the paint, leading to water marks, oxidation, and even cracking. 2. Dampness and mold: Compared to sunny weather, the interior of the car is more prone to dampness and mold after rain. Additionally, rainwater can seep into the car through body seams, causing metal parts to rust and corrode. Therefore, after the rain stops, accumulated moisture should be removed as soon as possible to prevent mold and other issues.
2
3
Share

What car is Batman's car?

Batman's car refers to the Lincoln Futura concept car. Here are some details about the Batmobile: 1. Engine; The Batmobile is equipped with a 5.7-liter 340 horsepower engine that delivers 400 lb-ft of torque. The vehicle is 9 feet 4 inches wide, 15 feet long, and weighs two and a half tons. It can accelerate from 0 to 60 mph in under 5 seconds and is capable of long-distance jumps. The most unique feature of the Batmobile is the absence of a front axle, with the wheels instead supported by the sides of the body. Technicians enlarged the rear wheels and positioned the engine and transmission nearby. The Batmobile even has an insect-like waistline, where the body twists when more power is applied. 2. Model: The Batmobile also comes with six truck tires. To achieve the designed skidding effect, tires with varying degrees of wear are used in different scenes, and tire pressure is adjusted accordingly. A total of eight Batmobiles were used in the film, five of which were fully equipped, one electronic version featured a movable top for easy access, and two were engine-less and lightweight for use in special stunt scenes where they were catapulted.
8
0
Share

The Difference Between 1.4L and 1.6L Displacement?

1.4L and 1.6L displacement differences are as follows: 1. Different power: The biggest advantage of 1.6L is higher success rate in acceleration. At the same engine speed, the 1.6L engine delivers significantly more power than the 1.4L; the 1.6L has more abundant power. At low RPM, the power difference is not significant, but when pressing the accelerator deeper for rapid acceleration, the 1.4L's performance is noticeably inferior to the 1.6L engine. 2. Different fuel consumption: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important parameter for measuring a vehicle. Some domestic cars do not have the above-mentioned model number on their rear, but their displacement is usually indicated on the body or rear. In urban driving, the 1.4L has a clear advantage, being more fuel-efficient than the 1.6L; on highways, the 1.6L is more fuel-efficient.
1
1
Share

How Long Does ETC Solar Power Last?

Typically, the solar battery of an ETC device can last for 3 years. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; the red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to eliminate air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC Usage Precautions: The ETC transaction sensing range is 8 meters. When approaching a stationary vehicle ahead, maintain a distance of at least 10 meters to prevent automatic payment for the vehicle in front, especially if its ETC device is malfunctioning or absent. The ETC lane recognition speed is 20 km/h. Driving too fast may prevent the system from reading the vehicle's device information, leading to failed deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag becomes loose or detached, will render the tag invalid. In such cases, take the device to the bank where the ETC card was issued or to a highway service center for inspection. If the detachment is not due to human error, reactivation may suffice. When using a debit card linked to ETC, insufficient balance may cause deduction failures. Follow the guidance of on-site staff to proceed to a manual MTC lane and use cash or card payment. Thick car windshields may cause poor signal reception. This is particularly important for vehicles that have had their windshields replaced after accidents or those with modified front windshields.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.