How to Deal with a Cracked Windshield?

1 Answers
SanHarper
07/25/25 2:19am
The main tool is a vacuum injector similar to a syringe structure, which extracts the air from the glass crack. Then fill it with glass repair agent (liquid adhesive). Next, use a UV lamp to irradiate for two minutes in all directions (up, down, left, and right) to solidify the repair solution. After removing the machine, there will still be a small gap at the center of the crack. At this point, drop a higher concentration of repair agent and cover it with a glass piece. Similarly, after irradiating and drying with the UV lamp, use a blade to level the surface, apply polishing agent, and polish it with a cloth.
Was this review help?
1
3
Share
More Forum Discussions

What are the methods for judging the distance between the front, rear, left, and right when driving?

When driving, it is necessary to know the position of the car on the road, how far the body is from the boundary line, and how far it is from the center line. Here are some methods for judging distances: 1. Judging the position of the left wheel: To judge the position of the left wheel, you need to know where the left wheel will pass over to avoid the tire pressing on the solid line or avoiding potholes and stones on the road. 2. Judging the position of the right wheel: When the line of sight intersects with the target through the right wiper, the tire will pass over that target. 3. Center line: Driving 60 centimeters away from the center line is relatively safe during normal driving. When the line of sight coincides with the intersection of the panel and the A-pillar and the center line, the body is just about 60 centimeters away from the center line. 4. Parking by the side: When parking on the right side, when the node of the right wiper coincides with the roadside, slightly pulling the direction to the left can achieve the effect of parking 10 centimeters away from the roadside.
12
4
Share

Where is the water temperature gauge on a Jetta car?

Jetta does not have a water temperature gauge, only a water temperature warning light, located on the car's dashboard. Taking the Jetta VS5 as an example, here is an introduction to the Jetta VS5: 1. Vehicle Positioning: The Jetta VS5 is a compact SUV. 2. Powertrain: It is equipped with a 1.4-liter turbocharged engine from the Volkswagen EA211 series, producing 150 horsepower and a maximum torque of 250 Nm. The engine delivers maximum power at 5000 to 6000 rpm and maximum torque at 1750 to 3000 rpm. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. 3. Suspension: The Jetta VS5 features a front MacPherson independent suspension and a rear multi-link independent suspension, which enhances wheel contact performance.
16
5
Share

What Causes the Electric Fan to Run at High Speed?

The reasons for the high-speed operation of the electric fan are as follows: 1. Excessive water temperature: When the water temperature exceeds 100°, the electric fan operates at high speed. 2. Excessive transmission oil temperature: When the transmission oil temperature exceeds 120°, the electric fan operates at high speed. 3. Excessive air conditioning pressure: When the air conditioning pressure exceeds 20 Bar, the electric fan operates at high speed. Below is relevant information about the electric fan: 1. Thermoswitch control: The high and low speeds of the car fan are controlled by the thermoswitch (F18). This switch has two gears and is installed on the radiator to detect the water temperature. It sends the two-gear signal to J293, which then conducts different circuits to control the high and low speeds of the electric fan. 2. Operation method: The car fan is installed behind the radiator (on the side close to the engine compartment) and pulls air from the front of the radiator when turned on. However, some models have the fan installed in front of the radiator (on the outer side), blowing air toward the radiator when turned on. The fan starts and stops automatically based on the water temperature. At high speeds, the air pressure difference between the front and rear of the vehicle is sufficient to maintain the water temperature at a certain level, so the fan may not need to operate under these conditions.
15
5
Share

Where is the reversing camera installed on the Baojun RC6?

The reversing camera of the Baojun RC6 is generally installed at the position of the license plate light. Below is a detailed introduction to the meanings of different colored trajectory lines in the reversing camera: 1. Red trajectory: Indicates the warning line, with a distance of 30cm from the rear of the car. When the car reaches near this line, the parking space is just right, and no further reversing is needed. 2. Yellow trajectory: Indicates the deceleration line, with a distance of 60cm from the rear of the car. You can continue to reverse, but pay attention to decelerating and checking the distance. 3. Green trajectory: Indicates the normal safety line, where the distance between the obstacle and the rear of the car is relatively large, allowing you to reverse with confidence.
11
5
Share

How to Use the Auto Window Button?

How to use the auto window button: 1. Locate the auto window control button on the left side of the driver's seat, press and hold the button until the window is fully raised; 2. After the window is fully closed, continue holding the button for approximately 2 to 5 seconds; 3. When you hear a "click" sound, it indicates that the car's programming is complete; 4. At this point, you can release the button and use the one-touch window function. Cars equipped with the one-touch window function have two positions for the window control button. The first position works like a regular power window, where the window's height is determined by how long you press the button; the second position allows the window to automatically fully close or open with just one press of the button.
2
4
Share

How to Check Your Vehicle Identification Number (VIN)?

To check the VIN, public security, procuratorial, or judicial departments must present official inquiry documents to the vehicle management office or traffic police for an official query. Below is relevant information about the VIN: 1. VIN location: For trucks and large vehicles, it is usually located at the rear of the vehicle frame on the right side; for cars, it is typically found in the lower left corner of the front windshield (under the wiper deflector) or under the door frame of the passenger seat; for motorcycles, turn the handlebars fully to one side, and you will find a nameplate under the odometer displaying the VIN. The vehicle registration certificate also lists the VIN in the designated section. 2. VIN content: The VIN, or Vehicle Identification Number, serves as a vehicle's unique identifier, much like a person's ID card. Each vehicle has a distinct 17-character alphanumeric VIN. This number provides extensive information about the vehicle, such as its manufacturing location, vehicle type, production year, and assembly details. Positions 1-3 indicate the manufacturing location, brand, and type; positions 4-8 describe vehicle characteristics; positions 9-11 include the check digit, model year, and assembly plant; positions 12-17 represent the serial number, which is the last six digits of the VIN.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.