How to Deal with a Cloned License Plate on Your Car?

1 Answers
VonAxel
07/29/25 10:59am
If you discover that your license plate has been cloned, it is essential to gather strong evidence, such as parking lot receipts, highway toll invoices, dashcam footage, and other relevant proof. Actively file a complaint with the traffic management department. Once you have prepared the evidence, proceed with the complaint to clarify that these violations were not committed by you, while also alerting traffic police to pursue the vehicles with cloned plates. Below are the relevant steps: 1. Collect all favorable evidence: Upon confirming that your license plate has been cloned, promptly start gathering all beneficial evidence, including photos of your vehicle's appearance, various parking receipts, highway toll receipts, your dashcam footage, and even surveillance recordings from parking lots or residential areas. 2. Submit a complaint to the traffic management department: After collecting the aforementioned evidence, you can file a complaint with the traffic management department regarding the cloned license plate. You may choose to file the complaint either at the traffic management department where your vehicle is registered or at the location where the violation occurred. 3. Apply for a new license plate number: If the complaint is successful, the traffic management department will issue a statement confirming the cloned license plate. With this statement, you can apply for a new license plate number at the vehicle management office. Of course, you may also choose not to change the license plate number. However, in the future, each time the cloned vehicle is involved in an incident, you will need to provide supporting documents and visit the traffic management department to prove your innocence.
Was this review help?
1
5
Share
More Forum Discussions

What is the reason for the right fan of Honda Civic not working?

Poor lubrication of the motor, overheating of the motor, and reduced capacity of the starting capacitor. Here is some related information about the Civic: Introduction: The Honda Civic comes in a three-door hatchback, a hardtop coupe, a hybrid version, and a five-door sedan version. The Honda Civic launched in the domestic market shares the same production platform as the existing Dongfeng Honda model, the Honda CR-V. Appearance: The new Civic largely retains the design of the overseas model, featuring full LED headlights. The side profile of the new car is more daring than the front, with the C-pillar's smooth transition resembling a coupe model. It adopts "bracket-style" LED taillights, and the light clusters take on the shape of a dart.
19
1
Share

Are 3.0-10 and 3.5-10 interchangeable?

3.0-10 and 3.5-10 are not interchangeable due to the different side widths of the steel rims. Difference in steel rim side width: The steel rim for a 3.00-10 tire has a side width of 4cm, while the steel rim for a 3.50-10 tire has a side width of 5.5cm. The latter is 1.5cm wider on the inner side than the former. Forcing a 3.50-10 tire onto a narrower rim would cause the tire to burst out from the rim because the rim is too narrow, even though both rims have the same diameter of 10cm. Functions: Support the entire weight of the vehicle and bear the load; transmit traction and braking torque to ensure adhesion between the wheels and the road; reduce and absorb vibrations and impacts during driving, preventing severe vibrations and premature damage to vehicle components; adapt to high-speed performance and reduce driving noise, ensuring safety, handling stability, comfort, and fuel efficiency.
19
1
Share

How to reset the maintenance reminder for a Polo car?

The method to reset the maintenance reminder for a Polo car is: 1. Turn off the ignition switch, press the clock adjustment button "SET" while turning on the ignition switch; 2. Release the "SET" button, then press the "SET" button once more; 3. Turn off the ignition switch, then turn it on again to check if the reminder has been reset. If not, the process must be repeated from the beginning. The Polo is a 5-door, 5-seat hatchback produced by SAIC Volkswagen. The car has a length of 4053mm, a width of 1740mm, a height of 1449mm, a wheelbase of 2564mm, and a fuel tank capacity of 42.5 liters. This model is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 83kW and a maximum torque of 145Nm.
8
5
Share

What is the fuel consumption of the Verna?

Verna's fuel consumption is 5.4-6.1 liters per 100 kilometers. Here is relevant information about the Hyundai Verna: Brand meaning: Verna product slogan: Verna is people. "Yue" represents joy, happiness, and delighting both heart and self - it's the attitude and mindset young people should adopt; "Na" signifies acceptance and sharing of one's own youthful attitude. Verna is people, conveying a youthful, joyful spirit that showcases young individuals' unique attitudes and lifestyles - it's the youth manifesto. Market positioning: After its launch, Verna will complete Beijing Hyundai's product lineup in the C1-segment market, bringing more segmented and differentiated choices to the market, further consolidating Beijing Hyundai's dominant position in the C1 segment. As an entirely new product created for young consumers, Verna embodies Beijing Hyundai's development direction towards "innovation, technology, and vitality" in both product capability and brand value, comprehensively meeting young consumers' personalized and diversified automotive needs.
16
5
Share

What is the model number of the original spark plug for the Lavida 1.6L?

The original spark plug for the Lavida 1.6L is from the BOSCH brand, with the model number F7HER-2. Depending on the vehicle model and production batch, the specific model number of the spark plug used may vary slightly. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high-voltage electricity into the combustion chamber, causing it to jump across the electrode gap and create a spark, thereby igniting the combustible air-fuel mixture in the cylinder. It mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. Spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the owner's manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
19
5
Share

Automotive Window Film Brands?

Automotive window film brands include 3M, Kangdexin KDX, V-KOOL, LLumar, Johnson Window Films, etc. 3M: 3M car films are ceramic films, which also belong to the heat-absorbing type. The most famous model is the Crystalline series. However, a major drawback of heat-absorbing films is that they stop absorbing heat once they reach a certain level, making their effectiveness limited. Kangdexin KDX: Kangdexin is one of the famous brands of automotive heat insulation films in China. Kangdexin automotive heat insulation films feature high heat insulation (99% UV blocking), high light transmission, and explosion-proof safety. It ranks first among domestic brands and top three in the entire industry. V-KOOL: V-KOOL, from the United States, uses the same magnetron sputtering technology as Kangdexin in production. The classic series is the windshield model V-KOOL VK70, but its top products suffer from severe oxidation and are overpriced. Applying it to a car costs three times more than other brands' top products with the same effect.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.