How to Deal with a Chipped Wheel Hub?

2 Answers
VonBrooklyn
07/28/25 9:33pm
When a hard tire hub is violently impacted by stones or other hard objects, it can cause a notch on the edge of the car's wheel hub. If the notch is not too large, it can be repaired through welding, sealing tests, and surface treatment based on the shape of the notch. More information about wheel hubs is as follows: 1. Wheel hubs are also called rims: The wheel hub is a cylindrical metal component that supports the tire from the inside and is mounted on the axle. It is also known as a steel rim, wheel, or tire ring. Wheel hubs can be categorized into different types based on diameter, width, forming method, and material. 2. Features: For ordinary car models, the appearance of the wheel hub is less considered, with good heat dissipation being a basic requirement. The process usually involves painting, where the hub is first sprayed and then baked, which is cost-effective, provides bright colors, and ensures long-lasting durability. Many mass-market car models use painted wheel hubs. Some fashionable and dynamic colored wheel hubs also utilize painting technology. Electroplated wheel hubs can be further divided into types such as silver electroplating, water electroplating, and pure electroplating.
Was this review help?
19
2
Share
AlexanderFitz
08/12/25 2:11am
Last time, a big chunk of my wheel rim got scraped off when I accidentally rubbed against the curb while turning in the parking lot. I first got out of the car to carefully inspect the damage and found that only the surface paint had come off, exposing the metal part. I immediately cleaned the wound with a wet cloth and then lightly sanded the rough edges with sandpaper to prevent oxidation and rust. If it's just a small scratch, you can buy a touch-up pen or repair kit to fix it yourself; but for deep damage, you need to go to a professional wheel rim repair shop. They use specialized equipment to sand and spray paint, ensuring an even finish that won't fade. After the repair, I recommend doing a tire balance test to prevent high-speed vibrations caused by rim deformation. When driving normally, pay attention to keeping a safe distance and avoid potholes to extend the life of your wheel rims. Safety first—don't handle it carelessly to avoid affecting driving stability.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Does a C1 Driver's License Require Annual Review?

C1 driver's license does not require annual review. You only need to renew the license within three months before its expiration date. Renewal process: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was issued to apply for renewal. The vehicle management office will process the renewal within one working day after approval. Driver's license validity period: Article 56 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of the motor vehicle driver's license, the driver's license will be renewed with a ten-year validity period. If the driver has not accumulated 12 penalty points in any scoring cycle during the ten-year validity period, the driver's license will be renewed with a long-term validity.
16
0
Share

How many cubic meters can a 9.6-meter truck carry?

A 9.6-meter high-barrier truck can carry approximately 50-55 cubic meters of cargo. The chassis height of a 9.6-meter high-barrier enclosed truck is generally around 1.3-1.5 meters; the internal width of the cargo compartment is about 2.3-2.4 meters; and the internal height for loading cargo is approximately 2.5-2.7 meters. Suitable cargo for enclosed trucks: The 9.6-meter high-barrier enclosed truck is more suitable for transporting various valuable goods, lightweight bulky cargo, and goods requiring waterproofing during transportation. The rear of the truck is equipped with a sleeper berth for the driver to rest. According to national regulations, the cab can only accommodate up to three people. For convenient loading and unloading, the 9.6-meter high-barrier enclosed truck usually has one or two doors on the side(s) of the cargo compartment, known as middle doors. The width of these doors is generally about 1-2 meters, and the height is around 2-2.7 meters. The 9.6-meter high-barrier enclosed truck is not very suitable for transporting large equipment due to difficulties in loading, unloading, and securing the cargo during transportation. Load capacity of a 9.6-meter high-barrier enclosed truck: The load capacity of a 9.6-meter high-barrier enclosed truck is generally within 0-12 tons. According to relevant Chinese laws and regulations, the total weight of the 9.6-meter high-barrier truck, including both the vehicle and cargo, must not exceed 17 tons.
13
3
Share

Can You Still Drive When the Car's Water Temperature Is Too High?

You should not drive when the car's water temperature is too high. First, pull over to the side of the road and avoid shutting off the engine immediately. Let it idle for a few minutes, then open the engine hood to check if the cooling fan is operating. If it's not running, inspect the fan belt to ensure it's intact and check the belt tension—both too loose or too tight can cause high water temperature. Once the water temperature has decreased, open the radiator cap. It's important to place a cloth over the cap first and slowly unscrew it, listening for a hissing sound before fully opening to prevent hot steam or water from spraying out and causing burns. The main causes of high water temperature in a car are usually due to water pipe leaks or insufficient coolant.
15
5
Share

What are the reasons for the brake system failure of the Haval H6 third generation?

The reasons for the brake system failure of the Haval H6 third generation are as follows: Brake pad wear: It may be due to severe brake pad wear. Brake pads are divided into two types: those with sensor lines and those without. When brake pads with sensor lines wear to the limit position, the sensor line will automatically connect the circuit, triggering the fault light. Low brake fluid level: It may be due to low brake fluid level. Brake fluid plays a crucial role in the car's braking system. When the driver presses the brake pedal, the force applied is transmitted by the piston of the master cylinder through the brake fluid to the wheel brake cylinders, causing the brake pads to contact the wheels and stop the vehicle. Insufficient brake fluid is also accompanied by significantly reduced braking force, and in severe cases, loss of braking power. This situation can be resolved by promptly replenishing the brake fluid.
9
2
Share

How to Handle ETC When Applying Car Window Tinting?

When applying window tinting to your vehicle, try to avoid removing the ETC device as much as possible. Once removed, the ETC device will be deactivated and you will need to contact bank staff for reinstallation. If removal is absolutely necessary, wait until the tinting is completed and have the device reactivated by professionals. How to Activate ETC: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If "Tag Invalid" appears when inserting/removing twice without the electronic tag attached, this is normal and won't affect activation. Alternatively, you can press the button on top of the electronic tag to enable Bluetooth directly. Turn on your phone's Bluetooth and open the corresponding mobile app (usually with a download QR code on the electronic tag), then enter the device activation interface. Click "Device Connection" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of your vehicle's front view to complete activation.
3
3
Share

What brands are under Nissan?

Nissan's brands include: Tiida, Sylphy, Teana, Patrol, X-Trail and Qashqai, Infiniti brand, and Venucia brand. Here is more information about Nissan: 1. Development History: Nissan's history dates back over 70 years to 1933 when it started producing the DATSUN small trucks. However, before World War II, Nissan was still in its early development stage, with both production scale and product variety growing very slowly. 2. Logo Introduction: The graphic logo places 'NISSAN' on a fiery red sun, succinctly stating the company name and highlighting the image of its country of origin, which is unique in automotive logo culture.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.