How to Deal with 30% Over-speeding on Highways?

1 Answers
DelMax
07/29/25 5:26pm
Exceeding the speed limit by 30% on highways will result in a fine of 200 RMB and 6 penalty points. Below are specific details regarding highway speeding: 1. Regulations: Exceeding the speed limit by less than 10% incurs no fine; exceeding by 10% to less than 20% results in a 50 RMB fine; exceeding by 20% to less than 50% results in a 200 RMB fine; exceeding by 50% to less than 70% results in a 1000 RMB fine; exceeding by 70% or more results in a 2000 RMB fine. 2. Highway violations: Highway violations are categorized into out-of-province and within-province violations. For within-province violations: Pay the fine at the traffic police station in the vehicle’s registered location, which is the most direct method. If the violation occurs within the same province as the vehicle’s registration, it can be handled at any local traffic police station or online. For out-of-province violations: After confirming the violation, it can be processed through legal agencies like post offices or delegated to friends or relatives in the violation location.
Was this review help?
18
0
Share
More Forum Discussions

Are there discounts for using ETC on highways?

According to relevant regulations of the State Council, there are discounts for applying for ETC, and banks handling the application offer greater incentives to promote ETC adoption. Starting from 2020, vehicles without ETC or not using ETC cannot enjoy toll discounts, and manual lanes are less efficient than ETC lanes. ETC charging principle: Highways have one or more ETC lanes. Through dedicated short-range microwave communication between the vehicle's on-board electronic tag installed on the windshield and the microwave antenna in the ETC lane, and using computer networking technology for backend settlement with banks, vehicles can pay tolls without stopping at toll stations. This is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase vehicle throughput by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving interoperability of transportation cards in key city clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC," with a specific target of "50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with smart transportation developments like vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC. ETC usage precautions: The ETC transaction sensing range is 8 meters. If the vehicle ahead stops, maintain a distance of over 10 meters to prevent accidental payment for the preceding vehicle due to ETC device failure or absence. The recognized speed for ETC lane passage is 20 km/h. Excessive speed may prevent reading vehicle device information and result in failed deductions. Unauthorized removal or movement of the OBU device, or detachment/loosening of the ETC electronic tag, will render the tag invalid. It can be taken to the bank where the ETC card was issued or a highway service center for inspection. Non-deliberate detachment or loosening only requires reactivation. When using a debit card linked to ETC, insufficient balance may cause deduction failure. Follow on-site staff guidance to use manual MTC lanes and pay via cash or card. Excessively thick windshields may cause poor signal reception, especially for vehicles with replaced or modified windshields after accidents.
15
5
Share

Can only one ETC be applied for a vehicle?

Only one ETC can be applied for a vehicle. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Highways" issued by the Ministry of Transport, the application of ETC is related to the vehicle's driving license. If you own multiple vehicles, you can use different driving licenses to apply for ETC. Documents required for ETC application: The original valid ID card of the vehicle owner, the original and copy of the vehicle's driving license (the page with the latest annual inspection stamp must be provided). If applying on behalf of others, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a corresponding bank debit card or credit card must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding ETC with a debit card. ETC deduction principle: There will be one or more ETC lanes on highways. Through the dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane of the toll station, and using computer networking technology for background settlement with the bank, the purpose of paying tolls without stopping at the toll station is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Save time: Eliminates the hassle of queuing and waiting; Green and environmentally friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically realized, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a clear target in the main indicators of the "13th Five-Year" comprehensive transportation development: "By 2020, the ETC usage rate of road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate of passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with the development directions of smart transportation such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and paying for the front vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also lead to deduction failure. Unauthorized disassembly or movement of the OBU device, ETC electronic tag falling off or loosening, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was applied for or the highway service office for testing. If the loosening or falling off is not man-made, it only needs to be reactivated. When using a debit card to bind ETC, insufficient balance will also cause deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield may cause poor sensing. Especially for vehicles that have had accidents and replaced the windshield, or friends who have modified the front windshield need to pay attention.
16
0
Share

What does the Chinese name of Buick Avenir mean?

Buick Avenir is named "Aivia" in Chinese, which is a high-end brand launched by Buick, representing upgraded models. Compared to the standard versions, Buick Avenir emphasizes more on luxury, with modifications made to the car's exterior and details. Essentially, Buick Avenir models are upgraded versions of the regular models, featuring more refined exterior designs. For example, the headlights are sleeker, the overall appearance is sharper compared to previous models, and the front fascia delivers a more visually striking impact. Additionally, corresponding enhancements in configurations further improve the car's performance.
5
5
Share

What engine does the GTR use?

The Nissan GTR is equipped with a VR38DETT 3.8L V6 engine. Its maximum horsepower is 480hp, and the maximum torque output is 588N·m. Here is some introduction to the Nissan GTR engine: 1. It is equipped with a dual-clutch transmission called GR6, which can be switched to manual mode, and can accelerate to 100 kilometers in 4.05 seconds. 2. The new entry-level GT-R adopts new 20-inch wheels, and in terms of power, it uses an improved turbocharger and the same 565 horsepower twin-turbocharged V6 engine as the old model.
17
2
Share

What does a vehicle's maximum horsepower mean?

Vehicle's maximum horsepower refers to the peak power output, where the corresponding crankshaft speed when the engine delivers maximum power represents its maximum power output. Engine performance is directly related to rotational speed - initially, power output increases with rising RPM. Maximum torque indicates the twisting force of the engine crankshaft; vehicles with identical gear ratios will demonstrate greater power with higher torque. Maximum power represents the work performed by torque and rotational speed per unit time. For naturally aspirated engines, maximum torque peaks at specific RPMs. Maximum power signifies the ultimate force an automotive engine can generate, where force disregards speed, with high power being solely determined by the engine.
19
0
Share

What does odo on the dashboard mean?

The odo on the dashboard is the letter on the odometer, which represents the total mileage of the car. In addition, trip is also used to indicate mileage. Here are some introductions to other aspects: 1. The tripA and tripB odometers can be switched, and the "reset" button is pressed by holding the right small black rod for about one second. 2. The tripA and tripB odometers can be used freely without any restrictions. 3. A can be set to reset every time you refuel to calculate fuel consumption. 4. B can be set to reset every time you service, every 5000KM service.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.