How to deactivate the anti-theft system on the Besturn B50?
3 Answers
Besturn B50 anti-theft system deactivation method: Open the trunk, lock all doors, insert and remove the car key more than 6 times. At this time, the ID stored in the remote control will be cleared. Then manually lock the driver's side door using the inner door handle, press the lock button once more, and then open the driver's side door. The car's anti-theft system will then be deactivated. The Besturn B50 is a car independently developed by FAW Car. Its body dimensions are 4615mm in length, 1785mm in width, and 1435mm in height, with a wheelbase of 2675mm. In terms of appearance, the Besturn B50's headlights use light guide illumination technology, and the dynamic double waistline gives the B50 a balanced and stable side profile. The standard two-tone brushed 16-inch aluminum alloy wheels enhance the sporty feel of the vehicle, making the Besturn B50 more fashionable and youthful.
Disabling the anti-theft system on a Besturn B50 isn't too difficult. First step, press the unlock button on the original key - you'll usually hear a beep confirming deactivation. If silent, the key battery might be dead; try replacing the coin cell. Alternatively, insert the key into the ignition switch, turn to ON position for five seconds until the anti-theft indicator light goes off. For stubborn cases, open the hood, disconnect the negative battery terminal for several minutes then reconnect to force a system reset. Avoid randomly pressing anti-theft setting buttons during normal use, and always confirm proper locking when parked to prevent accidental triggers. Check electrical systems and battery voltage regularly - low voltage often causes anti-theft malfunctions. During routine maintenance, have technicians test the anti-theft module as preventive care. Always consult the manual before DIY attempts to ensure correct procedures and avoid damaging components.
Deactivating the Besturn B50's anti-theft system requires a step-by-step approach. First, use the remote to unlock the car; if there's no response, check if the key is damaged or the battery is dead. Next, insert the key and try starting the vehicle – normal startup often deactivates the anti-theft system. If the light remains on, open the engine compartment and disconnect the negative battery terminal for five minutes. Reconnecting it will reset the system effectively. Safety precautions: wear gloves to prevent electric shock during operation; avoid parking on slopes or uneven ground as vibrations may accidentally trigger the alarm. During routine maintenance, clear clutter inside the car to minimize interference sources. When issues arise, first check fuses and wiring connections to prevent short circuits or aging. Promptly visit a 4S shop for diagnosis – professional tools enable faster troubleshooting. Don't delay as it may affect driving.