How to deactivate the anti-theft system of Besturn B50?

1 Answers
JasmineMarie
07/30/25 10:33am
The method to deactivate the anti-theft system of Besturn B50 is as follows: Open the trunk of the car and lock all the doors. Insert and remove the ignition key more than 6 times, at which point the ID stored in the remote control will be cleared. Then, manually lock and unlock the driver's side door using the inner door handle. Press the lock button once more, and then open the driver's side door to deactivate the car's anti-theft system. The dimensions of the Besturn B50 model are 4615mm in length, 1785mm in width, and 1435mm in height, with a wheelbase of 2675mm. Safety features include a reminder for the unfastened seatbelt on the passenger side, anti-whiplash seats, hidden airbags throughout the vehicle, central locking, and headlight level adjustment, among other safety equipment.
Was this review help?
5
5
Share
More Forum Discussions

What are the symptoms of a clock spring failure?

After the clock spring is damaged, the symptoms include the horn not working, abnormal noises from the steering wheel while driving, and the airbag warning light appearing on the dashboard. Horn not working: When the horn does not sound, it could be due to a damaged clock spring. First, unplug the horn connector, ground the horn button wire at the lower end of the clock spring, and then measure the horn wire below. If both measurements result in the horn sounding, then measure the horn wire at the upper end of the clock spring. If it does not sound, this confirms a clock spring failure. Abnormal noises from the steering wheel while driving: If the steering wheel makes no abnormal noises after removing the clock spring, this indicates the clock spring is damaged. Airbag warning light appears on the dashboard: The appearance of the airbag warning light can generally indicate a clock spring failure. Additionally, if the control buttons on the steering wheel, such as those for volume or radio, fail to function properly, this confirms a broken clock spring.
14
2
Share

Why is the fuel gauge needle on a motorcycle not moving?

The reasons why the fuel gauge needle on a motorcycle is not moving include needle sticking, issues with the fuel gauge itself, or problems with the fuel gauge wiring. Needle sticking: Check for loose connections or broken wires at each terminal and the sensor's resistance coil. If the needle swings irregularly, the sensor can be removed for inspection and repair. Issues with the fuel gauge itself: You can go to a motorcycle dealership for testing and replacement. First, remove the sensor for inspection and repair. If the resistance coil is broken or any parts are damaged, the sensor should be replaced. Problems with the fuel gauge wiring: The dashboard should be removed for inspection, using a multimeter and a pin for testing. After removing the dashboard, use a multimeter and a pin to locate and test the corresponding fuel gauge wiring on the dashboard.
3
1
Share

What Causes the Nissan Bluebird's Water Temperature to Sometimes Be High and Sometimes Normal?

Nissan Bluebird's water temperature sometimes high and sometimes normalThe reasons for the Nissan Bluebird's water temperature sometimes being high and sometimes normal are as follows: Low coolant level: This needs to be checked and is basically the only thing you can check yourself. If you're on the highway or in a remote area and don't have coolant in the car, you can temporarily use water as a substitute. Be careful not to open the radiator cap or reservoir cap immediately after stopping the car, as the internal pressure is too high and it will spray out instantly. Wait for the temperature to cool down a bit before slowly opening the reservoir cap. Dirty radiator: The radiator has many pores formed by cooling fins, which can easily get clogged with lint, sludge, etc., reducing ventilation and cooling efficiency. In winter, poor cooling may not be a big issue because the ambient temperature is low. However, in summer when the ambient temperature is already high, a clogged radiator with poor cooling can easily cause the water temperature to rise. This situation can be resolved simply by cleaning the radiator.
2
4
Share

What are the reasons for the sudden failure of the Tucson's low beam headlights?

Reasons for the sudden failure of the Tucson's low beam headlights: Dead battery: You can check the battery's charge by pressing the horn at this time. Bulb damage: Most bulbs have a certain usage cycle. When they are nearing the end of their lifespan, the light intensity may not meet standards, and they may overheat until the filament burns out. Additionally, there are other reasons such as water entering the headlight assembly after the vehicle goes through water, causing the heated bulb to crack due to a sudden temperature drop when it comes into contact with water droplets. Blown fuse: Most low beam headlight fuses can be found in the engine compartment fuse box or the fuse box on the left side of the dashboard. The fuse diagram is usually located on the back of the fuse box cover. Use a specialized clip to remove and inspect the fuse.
14
1
Share

What is the most suitable engine oil for the Atenza?

The most suitable engine oil for the Atenza is fully synthetic SM0W-20. Due to the compact structure of the engine, the internal components have smaller gaps, and using low-viscosity oil can improve fuel economy and maximize engine performance. Here are some additional details: 1. Naturally aspirated engines generally use lower-quality oil, such as mineral oil or semi-synthetic oil, but fully synthetic oil can also be used. 2. Compared to naturally aspirated engines, turbocharged engines have a more precise structure and operate under harsher conditions, requiring higher-grade lubricants with better fluidity. Fully synthetic oil is recommended. 3. As Mazda's new-generation flagship model, one of the Atenza's highlights is the application of Mazda's Skyactiv Technology. Compared to traditional naturally aspirated engines, the Atenza's Skyactiv engine has a high compression ratio of 13:1, improving fuel economy and torque by 15%.
15
0
Share

Does Turning Off Traction Control Help in Rainy Weather?

You should turn off the traction control (OFF) function on rainy days. This is because when starting on snowy or waterlogged roads, the wheels are very prone to slipping. Under such conditions, the vehicle's computer will automatically detect wheel slippage and, to a certain extent, limit the engine's power output. Slow Down: Regardless of the road width or surface condition, always drive slowly in the rain, constantly monitor the distance between your vehicle and others, and be mentally prepared to take various emergency measures. Visibility is low in rainy weather, and the field of vision is poor. Additionally, the vehicle's emergency performance, such as braking distance, may be reduced. Therefore, it's essential to slow down in advance, leaving enough time and space to handle any situation safely. Maintain Safe Distance: Driving in the rain obstructs your vision, so it's crucial to maintain a safe distance from other vehicles. Always monitor the distance between your car and those around you, increasing the safety gap as needed.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.