How to correctly turn on the air conditioning in the Tiguan?
2 Answers
Turn on the AC button of the Volkswagen Tiguan to activate the air conditioning cold air. The reasons why the car air conditioning is not cold are as follows: 1. Refrigerant leakage: Insufficient pressure in the system leads to poor air conditioning cooling effect. 2. Air duct blockage: The air conditioning has not been cleaned for a long time, resulting in a lot of dust on the air conditioning pipelines. At this time, the pipelines need to be cleaned. 3. Poor cooling effect of the condenser: It may be due to equipment aging, or there may be a lot of dust and foreign objects on the surface of the condenser, which affects the exchange efficiency of the air conditioning. 4. Improper use of the air conditioning: If you use the external circulation while turning on the air conditioning, it will definitely transfer the hot air outside the car into the car, and the air conditioning cooling effect will definitely become worse at this time.
After starting the car, I locate the air conditioning section on the center console. First, I press the A/C button to activate the cooling function, then press the AUTO button to enter automatic mode. The system automatically adjusts the fan speed based on the cabin temperature. I only need to set a comfortable temperature, such as around 25°C, using the temperature knob. For manual fan speed adjustment, I can press the fan speed buttons to increase or decrease it, while avoiding direct airflow to the face to prevent discomfort. The air recirculation modes are very practical: external circulation brings in fresh air for long trips, while internal circulation isolates external pollution during traffic jams. For regular maintenance, it's important to clean the filter and replace it annually to prevent odor buildup, which helps extend the air conditioning system's lifespan and ensures health. On hot days, I first open the windows to ventilate for a few minutes before turning on the cooling, which speeds up the cooling process without harming the system.