How to Correct the Car Body When Reversing?

1 Answers
StCorbin
07/29/25 8:37pm
When reversing, always pay attention to the rearview mirrors and control the clutch properly. Use your naked eye to judge the distance between the car body and the lines on both sides, ensuring the width is equal on both sides. Continuously observe the left and right rearview mirrors, and when the widths on both sides are equal, quickly straighten the steering wheel. Continue to control the speed with the clutch and reverse slowly. The main technique for correcting an uneven car body is to turn the steering wheel in the opposite direction and then straighten it at the right moment.
Was this review help?
14
1
Share
More Forum Discussions

What are the consequences of a coolant reservoir cap failing to release pressure and causing leakage?

After the coolant reservoir cap is damaged, coolant will spray out from the reservoir cap. Once the cap is broken, the flow of coolant into the engine will decrease, leading to a drop in coolant pressure. As a result, the heat generated during engine operation cannot be dissipated effectively, causing the engine to overheat. In severe cases, this may even lead to boiling over. Below are some related details: 1. Radiator: Most car engine cooling systems use an automatic compensation closed-type radiator, which mainly includes an additional reservoir. The reservoir cap is equipped with a steam valve and an air valve. The advantage of this design is that it reduces coolant loss in the cooling system while improving the radiator's heat dissipation performance. 2. Coolant: Coolant is a crucial component of the car's cooling system. When the engine is running, the coolant continuously circulates through the cooling channels. If the internal pressure becomes too high, the coolant may leak out, potentially causing pipe bursts. The coolant reservoir has maximum and minimum level marks, and when adding coolant, it must be filled between these two marks.
4
2
Share

Can You Shift from First Gear to Second Gear by Pulling Down Directly?

You can shift from first gear to second gear by pulling down directly. Here is some extended information about manual transmission cars: 1. Introduction: A manual transmission car uses a manual shift mechanical transmission (also known as manual gear, MT) to adjust the vehicle speed. This means you need to manually move the gear lever to change the gear meshing position inside the transmission, altering the gear ratio to achieve the desired speed. The gear lever can only be moved when the clutch is depressed. 2. Principle: The power input shaft is connected to the clutch, and the power transmitted from the clutch is directly passed to the gear set through the input shaft. The gear set consists of gears of different diameters, and different gear ratios result in completely different power transmission effects. The gear shifting during normal driving refers to changing the gear ratio.
20
3
Share

Can I Keep the License Plate After Selling My Motorcycle?

Selling a motorcycle does not allow you to keep the license plate. The license plate is associated with the vehicle's frame number and engine number through the vehicle management office. You must deregister the motorcycle (complete the scrapping process) to reuse the same license plate in the future. Therefore, after selling the motorcycle, you must deregister it to use the plate again. Below are the required procedures for motorcycle registration: 1. Documents: Original and photocopy of the buyer's second-generation ID card. 2. Invoice: Purchase invoice (the buyer's name on the invoice must match the name on the provided ID card). 3. Insurance proof: Original documents for vehicle purchase tax and compulsory third-party liability insurance. 4. Motorcycle details: Original certificate of conformity for the newly purchased motorcycle, along with the engine number and frame number imprint. 5. Inspection: Ride the newly purchased motorcycle to the traffic police station for photography and inspection.
1
2
Share

How to Check and Identify Whether a Car is New?

Methods to identify whether a car is new are as follows: 1. Check the manufacturing date: The vehicle's manufacturing date should match the date on the certificate of conformity, which is usually difficult to alter. If the manufacturing date exceeds 15 days, then it's an used car. 2. Inspect the brake discs: Most modern passenger vehicles use disc brakes (at least for the front wheels), making brake disc inspection a reliable method. Typically, after driving more than 200 kilometers, brake pads will leave noticeable marks on the discs. There's usually a 1-2mm gap between the brake pads and the outer edge of the disc. After certain mileage, this will form what's commonly called a "ledge" on the outer edge (new cars have very low ledges).
19
0
Share

Will the 2022 Accord have a 2.0T model?

2022 Honda Accord is about to be launched, with a body length of 4893mm, 2.0T+10AT+four-wheel drive configuration. The relevant introduction is as follows: 1. Exterior: The new car retains the wide horizontal chrome trim on the front face and the slender headlight clusters on both sides. The area of the air intake grille has been further enlarged, with three additional horizontal chrome trim bars inside. The fog light areas on both sides have become smaller, and the fog lights have been changed from the current strip shape to a circular one. After these adjustments, the overall look appears more refined. 2. Body dimensions: The dimensions of the new Accord are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm, which is still at a leading level in its class.
11
3
Share

What to Do If a Pedestrian Suddenly Dashes Out During Straight-Line Driving in Subject 3?

If someone approaches, you must step on the brake. However, when braking, you should also press the clutch to prevent the car from stalling. Even if you are too nervous to press the clutch, you must still step on the brake firmly to the end. Below is relevant information about straight-line driving in Subject 3: 1. Technique: Upon hearing the voice prompt "Please maintain straight-line driving," the examinee should look ahead, hold the steering wheel with both hands, and keep the vehicle moving straight. To maintain straight-line driving, you must learn to focus your gaze farther ahead, which makes it less likely for the vehicle to deviate. Looking farther enhances your sense of direction and allows you to observe the road conditions ahead in advance. While focusing far ahead, you must also pay attention to the road's edge lines to promptly detect any deviation of the vehicle body. 2. Precautions: During straight-line driving, avoid gripping the steering wheel too tightly or harshly. Instead, relax your entire body, keep your shoulders loose, hold the steering wheel lightly, and focus your gaze far ahead. Stay calm and maintain a good mindset and condition.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.