How to Correct the Car Body When It's Always Misaligned During Parking in Subject 2?

What Are the Reasons for Engine Oil Entering the Car Engine Radiator?

The following are the reasons for engine oil entering the car engine radiator: 1. Cylinder liner damage: If there is engine oil in the radiator, it may be due to cracks in the cylinder liner. Under high pressure, the engine oil can seep directly into the car radiator through these gaps. 2. Radiator damage: Damage to the engine oil radiator or transmission radiator can also cause engine oil to mix into the radiator. 3. Cylinder head gasket damage: If there is engine oil in the radiator and the high-temperature warning light is on, it is likely due to a damaged cylinder head gasket. The following are solutions for engine oil entering the car engine radiator: 1. For cylinder liner damage, the solution is to replace or repair the cylinder liner. 2. For radiator damage, the solution is to replace the radiator. 3. For cylinder head gasket damage, the solution is to replace the cylinder head gasket.

6

0

Share

How Deep Should the Brake Be Pressed When Starting an Automatic Transmission Car?

When starting an automatic transmission car, gently press the brake pedal. Below is the sequence for starting an automatic transmission car: 1. Insert the key and turn it to the second position (power-on mode), then wait for the system self-check to complete. 2. Shift the gear lever from P (Park) to N (Neutral). 3. Release the brake and start the engine. 4. Press the brake pedal with your foot, shift the gear lever from N to D (Drive), release the brake, and press the accelerator to start moving. Here are some additional tips for driving an automatic transmission car: 1. Accelerate gently when starting; always start in P or N gear, and avoid coasting in neutral. 2. Shift to N gear when waiting at a red light or briefly stopping; use P gear when parking. 3. Never shift into P gear while the car is moving. 4. Ensure the car is completely stopped before shifting into R (Reverse) for backing up.

5

0

Share

What to Pay Attention to in Driving License Subject 3

Here are the precautions for the Subject 3 test: 1. The clutch can only be used when starting, shifting up, shifting down, or stopping. Do not press the clutch during normal driving. When encountering a situation that requires slight deceleration, only use the brake to avoid coasting. 2. The green light will flash several times before turning red. At this time, based on the distance to the intersection and the vehicle speed, press the accelerator if the distance is close and the speed has not decreased. 3. After completing the Subject 3 road test, when the examiner gives the command "pull over," stop decisively as long as it is not at an intersection or on a solid line. 4. Upon hearing the command, assess the road conditions. If there are no solid lines or you are too close to the intersection, quickly turn on the right signal, check the rearview mirror, brake to decelerate and merge, position the car slightly to the right of the road center, turn the steering wheel back to the left, and press the clutch when the car can coast to straighten out. Once the car is straight, turn the wheel to the right to park.

17

2

Share

How Long Does It Take to Practice for Driving License Test Subject 3?

Subject 3, also known as the road test, generally takes about one week of practice to master all the essential maneuvers. Below is an introduction to Subject 3: 1. Subject 3 includes the road driving skills test and the safety and civilized driving knowledge test; 2. Subject 3 is part of the motor vehicle driver's license assessment and is the abbreviated term for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination; 3. The content of the road driving skills test varies depending on the type of vehicle being licensed. Below is extended information on key techniques for Subject 3: 1. Gear shifting operation: Ensure sufficient throttle input, and after each gear shift, decisively proceed to the next shift action; the shifting action, including hand and foot movements, should be quick, accurate, and smooth; 2. Straight-line driving: The key to straight-line driving lies in identifying reference points to determine if the vehicle is veering off course. Reference points can include the dashed white lines on either side of the lane, curbs, streetlight poles, etc.; additionally, keep your gaze far ahead and avoid focusing solely on the hood position; if the vehicle starts to veer, make slight adjustments to the steering wheel promptly without turning it excessively; 3. Pulling over: Pulling over requires the vehicle to be within 30 centimeters of the roadside line. The principle is similar to straight-line driving—identify a reference point. Generally, when the raised part of the windshield wiper aligns with the roadside line, the distance is approximately 30 centimeters.

12

0

Share

What is the difference between an auto trade store and a 4S store?

Here are the specific differences between auto trade stores and 4S stores: 1. Authorization: 4S stores are authorized to sell cars, while auto trade stores are not. A 4S store is an officially authorized dealer of a car brand manufacturer, usually selling only one brand of vehicles, whereas an auto trade store can sell cars from many brands. 2. Business scope: Auto trade stores generally only sell cars, handle insurance, and provide vehicle loans; 4S stores offer a wide range of services, including car sales, repairs, parts, maintenance, and test drive appointments. 3. After-sales service: 4S stores integrate car sales, repairs, after-sales service, and parts sales, while auto trade stores do not provide after-sales service and lack sufficient after-sales guarantees.

16

2

Share

Where is the Best Position for a Three-Band Equalizer?

The optimal position for a three-band equalizer varies from person to person, as everyone perceives sound differently and has unique preferences for music quality. Therefore, there is no universal standard for adjusting the high, mid, and low frequencies of a three-band equalizer—what suits you best is ideal. Car owners can manually adjust the in-car three-band equalizer while playing music to experience the effects of different frequency settings. A car audio equalizer is an electronic device that adjusts the amplification of various frequency components in an electrical signal. It compensates for deficiencies in car speakers or sound environments by fine-tuning different frequency signals, enhancing sound sources, and serving other specialized purposes. Typically, the equalizer on a mixing console can only adjust high, mid, and low-frequency signals separately.

19

0

Share

How to Correct the Car Body When It's Always Misaligned During Parking in Subject 2?

What Are the Reasons for Engine Oil Entering the Car Engine Radiator?

How Deep Should the Brake Be Pressed When Starting an Automatic Transmission Car?

What to Pay Attention to in Driving License Subject 3

How Long Does It Take to Practice for Driving License Test Subject 3?

What is the difference between an auto trade store and a 4S store?

Where is the Best Position for a Three-Band Equalizer?

Is it necessary to go on the highway after ETC activation?

What is the speed rating of 91V tires?

What is the definition of candle-type suspension?

What is the Difference Between 92 and 95 Octane Gasoline?