How to Cool Down a Car Exposed to Sunlight in Summer?

1 Answers
VonDeclan
07/29/25 6:37pm
Methods to cool down a car exposed to sunlight in summer: 1. Open the doors for ventilation: After a car is exposed to sunlight in summer, it's best to first open the doors to allow air circulation, which helps the car gradually cool down. Once the interior is less stuffy, close the doors and turn on the air conditioning. It's also advisable to use a heat-insulating pad on the seats to avoid excessive heat. 2. Apply car glaze: To reduce the heat caused by UV rays, car manufacturers have developed a high-molecular UV-reflective paint care agent. Applying a layer of this agent on the car's surface in summer can help prevent the body from overheating and minimize UV damage. 3. Clean the radiator: When washing the car, remember to clean the radiator, as it tends to accumulate various impurities that hinder engine cooling. Cleaning the radiator is one way to help cool down the car. 4. Install a sunshade: Summer sunlight can heat up the car's interior. A sunshade can reflect sunlight and prevent direct exposure. Sunshades are typically placed on the front and rear windows. Using a sunshade can significantly lower the temperature of the seats and dashboard, making it an effective cooling method. 5. Park with windows slightly open: In summer, if a car is parked with all windows closed, the interior can become hotter than the outside temperature. To prevent this, leave a small gap (about the width of a finger) when parking to allow air circulation between the inside and outside, thereby reducing the interior temperature. Be cautious not to leave too large a gap to avoid theft of valuables. 6. Park in the shade: The primary reason a car gets hot is direct sunlight exposure. Whenever possible, park the car in a professional underground garage, under a tree, or in any other shaded area. This is the most effective way to prevent the car from overheating.
Was this review help?
6
5
Share
More Forum Discussions

Can New Energy Vehicles Be Charged at Home?

New energy vehicles can be charged at home. Here are the specific details about new energy vehicles: Power Source: New energy vehicles refer to those that use unconventional vehicle fuels as their power source, or use conventional vehicle fuels with new types of onboard power devices, integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles. Classification: New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid vehicles, fuel cell electric vehicles, hydrogen engine vehicles, and other new energy vehicles. License Plates: Special license plates for new energy vehicles are green with black characters and black borders. New energy vehicle license plates are gradient green, while large new energy vehicle license plates are yellow-green dual-colored.
11
1
Share

How to Open a Ferrari Door?

To open a Ferrari door, press the protrusion on the lower side of the door and pull upward. Ferrari is an Italian automobile manufacturer founded by Enzo Ferrari, headquartered in Maranello, Italy. It primarily produces Formula One race cars, sports cars, and high-performance supercars. Some Ferrari models were designed by the founder, Enzo Ferrari. The LaFerrari is a flagship supercar introduced by Ferrari to replace the Enzo Ferrari model. It features a hybrid system called HY-KERS, combining a 6.3-liter V12 naturally aspirated engine producing 800 horsepower with an electric motor delivering 120 kW, resulting in a combined output of 963 horsepower.
6
3
Share

Where is the mechanical key ignition hole of the Roewe i5?

Roewe i5 does not have a mechanical key ignition hole. Below is the relevant introduction of the Roewe i5: 1. Exterior design: The front grille adopts a polygonal shape and is enhanced with bright trim strips, ensuring the car's premium feel while visually extending the vehicle's width, giving it a more stable and grand appearance. 2. Interior design: The main color scheme is red and black, creating a passionate yet fashionable look with high resale value. The cabin features extensive use of soft materials for wrapping, with meticulous attention to detail.
7
5
Share

Which one to choose, Odyssey or Elysion?

It depends on the owner's personal needs. The differences between Odyssey and Elysion are as follows: 1. Different positioning: Odyssey is positioned as a family car, while Elysion is positioned as a business model. 2. Different appearance: The design of Elysion is very avant-garde, with a horizontal grille design and sharp LED light sources, which performs very well in lighting. The appearance of Odyssey is smoother than that of Elysion, with a very delicate overall smoothness, designed more conservatively, in line with the aesthetic concept of Chinese people, not as avant-garde and radical as Elysion, changing from the old side-opening door to the current sliding door.
1
3
Share

How to Quickly Remove New Car Odor?

Methods to quickly remove new car odor: 1. Use professional air purification products, such as zeolite and diatomite; 2. Open windows for ventilation, which is economical and convenient; 3. Use activated carbon, which can adsorb harmful substances like formaldehyde, but activated carbon does not have a decomposition function, so its adsorption capacity is limited and it can easily become saturated, requiring regular replacement; 4. Use a car air purifier. If there are highly irritating gases in the car, immediate attention is needed. However, some toxic gases are colorless and odorless. It is recommended to combine window ventilation with zeolite or activated carbon to remove formaldehyde from the car. For activated carbon, regular replacement or outdoor exposure to sunlight will yield better results.
9
0
Share

What is a Connecting Rod Bearing?

Connecting rod bearings are paired with crank pins to reduce wear on the crank pins. In crosshead-type connecting rods, the big end bearing is often made separately and then securely attached to the rod body using connecting rod bolts. A friction-reducing alloy is typically cast directly onto the inner surface of the bearing. For non-crosshead-type connecting rods, the upper half of the big end bearing is usually integrated with the rod body, while the lower half (bearing cap) is manufactured separately and then bolted to the upper half using connecting rod bolts. Both the upper and lower halves of the bearing are lined with bearing shells. Some connecting rod bearings feature oil holes drilled into the inner surface of the bushing, and some may also have oil grooves to facilitate lubrication. Self-aligning or platform-type small end bearings are commonly used.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.