How to Control Vehicle Speed in Subject 2?

1 Answers
DiAniyah
07/25/25 9:17pm
Here are the techniques for controlling vehicle speed during the Subject 2 driving test: 1. Quick Press and Slow Release: When pressing the clutch, do it quickly and release slowly. Place the ball of your foot on the pedal to prevent slipping. 2. Speed Control: On uneven road surfaces, lightly apply the brake to control speed. Gradually increase pressure and avoid sudden braking. 3. Semi-Engagement State: Whether starting on flat ground or a slope, accurately sense the clutch's semi-engagement state. Develop the habit of slowly lifting the clutch to semi-engagement before releasing the brake until the vehicle starts moving gradually. 4. Release Clutch Before Brake: When stopping, press the clutch first, then the brake. After shifting to neutral, release the clutch before the brake.
Was this review help?
7
4
Share
More Forum Discussions

Is the Car Trunk Sealed?

The car trunk is sealed. Below are some relevant introductions about the car trunk: 1. The car trunk is sealed using sealing strips. 2. It also serves to prevent water leakage, similar to the sealing strips on a refrigerator, so air can hardly escape from the trunk. 3. The elastic net in the trunk can be used to secure fragile items, and almost every car's trunk is equipped with an elastic net. 4. Most modern car trunks are equipped with an emergency escape handle. There is a pull ring inside the trunk; pulling it can open the trunk lid, which is very useful in critical situations.
20
2
Share

How to Distinguish Volkswagen Series Models?

Volkswagen series models can be distinguished by checking the model designation at the rear of the vehicle or by observing front-end features: the Magotan has four slats on its front grille; the Passat has three; while the new Lavida features two. As a German brand, Volkswagen operates in China through two joint ventures: SAIC Volkswagen and FAW-Volkswagen, alongside imported models. The Magotan, specifically referring to the Volkswagen Magotan, originates from the FutureB6 platform closely related to the Passat B6. It represents FAW-Volkswagen's first B-segment sedan since its establishment, with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, a wheelbase of 2812mm, a fuel tank capacity of 70 liters, and a top speed of 230km/h.
17
2
Share

How to reset the maintenance light on a Cadillac ATSL?

The operation needs to be performed with the engine turned off. Turn on the vehicle's ignition switch and fully depress the accelerator pedal three times within five seconds. Each press must be fully depressed to the floor. If the instrument panel does not display a prompt to change the engine oil as soon as possible, it indicates that the maintenance light has been reset. Below is additional information: Cadillac: Cadillac is a brand from the United States, belonging to the General Motors Group, and is a luxury vehicle brand. It was established in 1902 in Detroit, USA. Cadillac brand models have always been the official vehicles of the United States, witnessing the changes in American leadership.
11
5
Share

Can the motorcycle odometer be adjusted if it's inaccurate?

Motorcycle odometer can be adjusted if it's inaccurate. Precautions for motorcycle riding: Avoid racing with cars, drive safely according to traffic regulations, and yield to pedestrians. Do not follow too closely; maintain an appropriate distance by staying at the right rear corner of the vehicle in front. When overtaking, pass from the left side of the vehicle ahead; overtaking from the right or between two parallel vehicles is prohibited. Speed limits for motorcycles: On highways, motorcycles must not exceed 80 kilometers per hour. Exceeding this limit may result in penalties from traffic police. Additionally, riding without a helmet on highways will lead to being stopped and fined by the police, and carrying passengers on highways is strictly prohibited.
5
4
Share

Differences between the 488 and 488 Pista?

Here are the differences between the 488 and 488 Pista: 1. Difference one: Different horsepower. The 488's engine has 670 horsepower and a maximum torque of 760 Nm, while the 488 Pista's engine boasts 720 horsepower and 770 Nm of maximum torque. Additionally, the front section of the 488 Pista has undergone some special design, resulting in greater downforce compared to the standard 488. 2. Difference two: Different engines. Both feature a 3.9-liter twin-turbocharged V8 engine, but the 488 Pista's engine has upgraded exhaust systems, crankshaft, connecting rods, and pistons.
6
0
Share

What are the steps for testing engine cylinder pressure?

Engine cylinder pressure testing steps are: 1. Run the engine until it reaches normal operating temperature, with coolant temperature between 85-95°C. 2. Remove all spark plugs or fuel injectors, and ground the high-voltage wires. 3. Depress the accelerator pedal to fully open the throttle. 4. Press the conical rubber adapter of the cylinder pressure gauge firmly into the spark plug hole of the cylinder being tested, or screw the threaded adapter into the spark plug hole. 5. Crank the starter for 2-3 seconds, then read the stabilized gauge reading. 6. Main factors affecting engine cylinder pressure include: intake and exhaust valve wear, cylinder wear, piston ring wear, and wear between the crankshaft and connecting rods.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.