How to Control Vehicle Speed in Subject 2?

2 Answers
NadiaLynn
07/24/25 11:15pm
Controlling vehicle speed in Subject 2 requires visual judgment and foot practice. Below are specific methods for speed control: 1. Observe body vibration: When reaching the semi-engaged state, the vehicle body will vibrate, which can be felt by placing hands on the steering wheel. Especially on a slope, when the clutch reaches the semi-engaged state, the vehicle will have a tendency to move forward. At this point, maintain the position, slightly press the accelerator, and start smoothly. 2. Rely on foot sensation: When the engine sound changes, the clutch pedal will also feel like it's pushing against the foot. 3. Monitor the tachometer: When the tachometer shows a noticeable drop, it indicates the vehicle is in the semi-engaged state. Before starting the car, press the clutch pedal fully with the left foot, then shift into first gear. Gently release the clutch with the left foot until the car slightly vibrates, then release a bit more to allow the car to move forward slowly. As the car moves forward, control the clutch pressure with the left foot. If the car speeds up, press the clutch slightly harder; if the car slows down and is about to stop, release the clutch a bit more.
Was this review help?
12
0
Share
VonArcher
08/10/25 3:19pm
I just passed the Subject 2 test recently, and speed control was my biggest challenge. At first, improper clutch operation caused the car to jerk between sudden acceleration and deceleration, and I stalled several times during hill starts. My coach taught me to practice with the half-clutch technique: gently pressing the clutch to keep the car creeping slowly without stopping. I found an empty parking lot and repeatedly practiced starting and stopping until the speed stabilized. During the test, maintaining a slower speed allowed me to clearly see the position during reverse parking and parallel parking, avoiding crossing the lines. After several practice sessions, I got the hang of it—treat the clutch gently and avoid stomping on the accelerator. Speed control isn’t just a test skill; it’s the foundation of safe daily driving, especially when turning. Keep your breathing relaxed, look farther ahead, and don’t fixate on the dashboard. Practicing for half an hour daily for a few days showed significant improvement.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

Should I Learn Manual or Automatic Transmission?

It varies from person to person. Manual transmission cars are much more complex than automatic ones, and due to the higher difficulty in learning manual transmission, the pass rate for driver's license tests is also lower. Below are the differences between manual and automatic transmission: 1. Learning period: Manual transmission cars are more complex than automatic ones, so the learning period differs. Typically, learning manual transmission takes at least one month longer than automatic, and due to the greater difficulty, the pass rate for driver's license tests is also lower. 2. Driver's license: A manual transmission license is classified as C1, while an automatic transmission license is C2. Holders of an automatic transmission license cannot drive manual transmission cars, but holders of a manual transmission license can drive automatic transmission cars. 3. Cost: Because manual transmission is more difficult to learn and has a lower pass rate, its fees are generally cheaper than automatic transmission. Usually, learning automatic transmission is more expensive.
15
4
Share

Can Motorcycle Compulsory Traffic Insurance Be Processed Online?

Currently, motorcycle compulsory traffic insurance cannot be processed online. It can only be handled at traffic police stations, vehicle management offices, or insurance company business halls. Here is some relevant information about compulsory traffic insurance: 1. Introduction: Compulsory traffic insurance, officially known as "Compulsory Motor Vehicle Traffic Accident Liability Insurance," is a mandatory liability insurance. It covers compensation by the insurance company for personal injuries, fatalities, and property losses (excluding the vehicle's occupants and the insured) caused by the insured motor vehicle in a road traffic accident, within the liability limits. 2. Coverage: Compared to commercial third-party liability insurance, which has over 20 exemption clauses, compulsory traffic insurance has fewer exemptions, such as "losses caused intentionally by the victim," "property losses of the insured," "related arbitration and litigation costs," and certain indirect losses caused by the accident. The coverage is much broader. Moreover, regardless of whether the insured vehicle is at fault in the accident, compulsory traffic insurance provides compensation within the liability limits, with no deductible or exemption rate.
17
2
Share

What is a New Energy Vehicle?

New energy vehicles refer to automobiles that utilize unconventional vehicle fuels as power sources, or employ conventional vehicle fuels with new types of on-board power devices, integrating advanced technologies in vehicle power control and drive systems, resulting in vehicles with advanced technical principles, new technologies, and novel structures. Below is an introduction to new energy vehicles: 1. Types: New energy vehicles include four major categories—Hybrid Electric Vehicles (HEV), Battery Electric Vehicles (BEV, including solar-powered vehicles), Fuel Cell Electric Vehicles (FCEV), and other new energy vehicles (such as those using supercapacitors, flywheels, and other high-efficiency energy storage devices). 2. Policy: In November 2020, the General Office of the State Council issued the "New Energy Vehicle Industry Development Plan (2021–2035)", which requires the thorough implementation of the national strategy for the development of new energy vehicles, promoting the high-quality and sustainable development of China's new energy vehicle industry, and accelerating the construction of an automotive powerhouse.
4
5
Share

How to Reset the Maintenance Light on Roewe i6?

Here are the steps to reset the maintenance light on Roewe i6: 1. First, turn off the ignition switch of the Roewe i6. 2. Press and hold the trip meter reset button on the Roewe i6 dashboard. It's important to keep this button pressed continuously. 3. Turn on the ignition switch of the Roewe i6 while still holding the button mentioned in the previous step. 4. Finally, the odometer of the Roewe i6 will start counting down. When the display shows 0000.0, immediately release the button you've been holding. 5. The maintenance light will then be successfully reset.
15
1
Share

How to bleed the clutch on a Great Wall H6?

Here are the methods for bleeding the clutch master cylinder of a Great Wall H6: 1. Manual Bleeding Method: Step on the clutch pedal repeatedly by pressing down and releasing. When you feel resistance while pressing the pedal, use a wrench to loosen the bleeder screw on the booster to release air. Tighten the bleeder screw after bleeding, and repeat this process several times until all air is removed from the hydraulic line. 2. Assisted Bleeding Method: Use a suitable length of rubber hose, connecting one end to an air source and the other end to the vent hole on the reservoir cap. Use air pressure to bleed the system. During bleeding, first attach a transparent plastic tube to the bleeder screw on the booster, with the other end of the tube directed into a clean container. The air pressure should not exceed 300 kPa to avoid damaging the reservoir. Then, loosen the bleeder screw on the booster to release air. 3. Mechanical Bleeding Method: Perform this on a dedicated clutch bleeding machine, which has two suitable-length hoses. Connect the fuel supply hose to the reservoir port and the return hose to the bleeder screw on the booster. Press the start button to activate the oil pump, which will quickly push the hydraulic oil through the system to remove all air from the hydraulic line. Tighten the bleeder screw and remove the hoses to complete the bleeding process. After bleeding the clutch hydraulic line, regardless of the method used, ensure the reservoir is filled to 4/5 of its capacity. Refill if necessary.
10
3
Share

What engine is used in the BYD Surui?

BYD Surui's engine is independently developed by BYD. The differences between gasoline and diesel engines: 1. Gasoline engine: High speed, light weight, low noise, easy starting, and low manufacturing cost. 2. Diesel engine: High compression ratio, high thermal efficiency, better economic performance and emission performance than gasoline engines. Classification of car engines based on power source: 1. Diesel engine. 2. Gasoline engine. 3. Electric vehicle motor. 4. Hybrid engine. The main performance indicators of an engine include: 1. Power performance indicators. 2. Economic performance indicators. 3. Environmental indicators. 4. Reliability indicators. 5. Durability indicators.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.