How to Control Vehicle Speed During Subject 2 Driving Test?

[DelAshley]

Methods to control vehicle speed during Subject 2 driving test are: 1. Preparation in advance: First, ensure all equipment is ready beforehand and avoid last-minute changes at the test site. Additionally, develop the habit of not relying on the instructor during daily practice; 2. Practice speed control through straight-line driving: Whether moving forward or backward, maintain the vehicle on a straight path while repeatedly pressing and releasing the clutch to observe speed variations and feel the vehicle's vibration state; 3. Familiarize yourself with the clutch's semi-engaged state; 4. Coordinate clutch and brake: Press the clutch quickly but release it slowly, always keeping the movement range as minimal as possible; 5. Steering wheel: When turning the steering wheel to its limit, slightly prepare to lift the left foot as the locked wheels create forward resistance, slowing down the vehicle.

[Lila]

When I was taking the driving test for Subject 2, the most challenging part was controlling the speed. At first, I would press the accelerator too hard out of nervousness, causing the car to rush forward and overshoot the parking spot. Later, I realized that the clutch was the key—stepping on the clutch with my left foot to the semi-engagement point and slowly lifting it to control the speed, while keeping my right foot ready on the brake just in case. During practice, it’s important to get a feel for the car’s behavior at low speeds, locate the semi-engagement point, and remember to press and release gently without shaking your leg. The test area is small, so movements must be precise—if the speed is too high, steering becomes inaccurate, and you’re more likely to cross lines and lose points. I practiced for a week, spending an hour each day just working on clutch control. Now that I’ve passed, I understand that slow and steady wins the race. Controlling speed isn’t just about avoiding stalling—it also ensures safety and reduces mistakes. My advice is to get a good rest the day before the test, unlike me who was so stressed that my hands and feet shook. In short, practice the clutch more—once you stabilize the speed, Subject 2 becomes much easier.

[CarterFitz]

Controlling the speed in Driving Test Subject 2 relies on clutch operation. Use your left foot to steadily find the semi-engaged position of the clutch, ensuring the car moves at a constant speed. Practice starting and stopping repeatedly in an open area to build muscle memory. If the speed is too fast, the car may deviate from the route; if too slow, it risks stalling. My suggestion is to coordinate with steering—slow down slightly when turning and maintain a slightly faster pace on straight paths. A common mistake for manual transmission beginners is erratic foot movement, so keep the left foot steady and avoid bouncing, while lightly resting the right foot on the brake. Regularly practice parking lot drills like reverse parking in the driving school car, adjusting speed as you go. Stay calm during the test—don’t rush even if time allows; prioritize precision over speed. Remember, mastering speed control is the foundational skill for this subject—without it, even the most familiar maneuvers will fail.

[CatherineDella]

In the Subject 2 driving test, speed control mainly relies on the clutch. During practice, I found that finding the semi-engagement point with the left foot allows for slow movement; don't rush to press the accelerator, first stabilize the speed. During the test, precise maneuvers like reverse parking or parallel parking can easily go wrong if the speed is too high; practicing a few more times will help form the habit. Maintain a steady vehicle speed, and the steering wheel will turn smoothly in coordination.