How to Control the Steering Wheel Properly?

2 Answers
DelHadley
07/24/25 12:40pm
Methods to control the steering wheel properly: 1. After getting into the car, align your body with the steering wheel and keep it straight, lightly lean your back against the backrest, adjust the seat to a suitable position according to your height, and fasten the seat belt; 2. Keep your eyes level and look straight ahead, gently hold the steering wheel at the 9 o'clock position with your left hand and at the 3 o'clock position with your right hand, with the thumbs of both hands naturally extended and resting on the upper edge of the steering wheel, and the other four fingers lightly gripping from the outside inward; 3. Use a reference point on the front of the car. When the reference point is in the middle or on one side of the road, you should be able to accurately sense the position of the vehicle to determine the timing and extent of turning or returning the steering wheel; 4. Utilize the peripheral vision of both eyes to overcome the phenomenon of correcting the direction too late due to focusing only on the distance and neglecting the near.
Was this review help?
9
3
Share
LolaLynn
08/11/25 6:46am
The key to steering wheel control lies in mastering the fundamental techniques. When driving normally, I prefer holding the wheel at the 9 and 3 o'clock positions, which ensures maximum maneuverability with slightly bent, relaxed arms. During turns, initiate steering early and rotate smoothly—avoid sudden jerks to prevent the car from becoming unstable. Especially at high speeds, subtle adjustments work better than large movements. When first practicing, it's best to perform U-turns and parallel parking drills in open areas to develop feel. Don't death-grip the wheel; use finesse that matches your speed. Staying relaxed is crucial too—tension leads to over-gripping and vehicle sway. Remember, proper steering technique impacts overall driving safety, and developing good habits makes driving significantly smoother.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

Is the Crown a High-End Toyota Vehicle?

The Crown is a high-end Toyota vehicle. Here are some details about this car: 1. Body dimensions. The length, width, and height are 5020x1805x1480mm, with a wheelbase of 2925mm. 2. Powertrain. It is equipped with a 2.0T inline 4-cylinder turbocharged engine across the lineup, paired with an 8-speed automatic transmission, delivering a maximum power of 173KW, maximum horsepower of 235PS, and maximum torque of 350N·m. The fuel supply system utilizes hybrid injection. The drive system is rear-wheel drive for all models. 3. Suspension. The front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.
19
0
Share

Can the Rear Seats of the Tiggo 8 Lie Flat?

The rear seats of the Tiggo 8 can lie flat. More details about the Tiggo 8 are as follows: 1. The method to fold down the rear seats of the Tiggo 8 involves simultaneously folding the backrests of the left and middle seats, adjusting the seat headrest height, removing it if necessary, and retracting the middle armrest. Then, pull up the left seat backrest adjustment handle while simultaneously pulling the backrest forward to lay it flat. Next, press the middle seat folding button while pulling the backrest forward to lay it flat. 2. To fully flatten the rear seats of the Tiggo 8, first adjust the height of the rear seat headrests, removing them if necessary. Retract the rear seat safety belts. Use your hand to pull the unlocking latch on the upper part of the backrest to unlock it while pulling the backrest forward to lay it flat. After folding, the backrest of the rear seats will be level with the trunk carpet.
7
0
Share

Is the Mondeo New Energy a Plug-in Hybrid?

The Mondeo New Energy is a plug-in hybrid. Here are some details about this vehicle: 1. Transmission. The transmission system is paired with a 6-speed automatic manual transmission. 2. Exterior. Compared to the 2018 model currently on sale, the new vehicle features redesigned grille, front fog lights, and wheel rims. The grille has been changed to a mesh pattern, and chrome trim has been added to the tail lights to enhance both the premium feel and sporty appearance. Additional Information: The 2018 Mondeo has undergone adjustments in its configurations. For example, the EcoBoost180 Comfort/Fashion/Luxury models and the EcoBoost200 Fashion/Luxury models no longer include rear privacy glass; the EcoBoost200 Luxury Sport model has removed the electric steering wheel adjustment and steering wheel heating features.
18
5
Share

How Much Horsepower Does the BMW M2 Have?

BMW M2's maximum horsepower can reach 410PS, and its engine model is S55. The S55 is a 3.0-liter twin-turbocharged engine. Here are some additional details: 1. The BMW M2's S55 engine has a maximum torque of 550 Nm. This engine can output maximum torque between 2350 and 5230 rpm and maximum power between 5230 and 7000 rpm. The S55 engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. The dual-clutch transmission is highly suitable for high-performance vehicles, as it offers fast gear shifts and high transmission efficiency. The dual-clutch transmission has two sets of clutches: one controls the odd-numbered gears, and the other controls the even-numbered gears.
17
3
Share

Where is the engine of the Geely Binyue produced?

Geely Binyue's engine is a domestic brand. Both the Geely Binyue Sport version and the regular version use a 1.5T engine jointly developed by Geely and Volvo. Below is the relevant introduction of the Geely Binyue: 1. In terms of power, it is equipped with a 1.5T three-cylinder engine, with a maximum power of 177 horsepower and a peak torque of 255N·m, paired with a 7-speed wet dual-clutch transmission, achieving a 0-100km/h acceleration time of just 7.9 seconds. 2. In terms of body dimensions, its length, width, and height are 4330×1800×1609 millimeters, with a wheelbase of 2600 millimeters.
3
3
Share

Why does the Nissan Tiida experience a jolt when shifting into reverse gear?

Nissan Tiida experiences a jolt when shifting into reverse gear due to the following reasons: Contamination inside the transmission: In many cases, the jolt in an automatic transmission is not caused by damage to the internal valve body but by stubborn dirt and impurities inside. Especially when dirt and impurities accumulate inside the valve body, forming blockages, it becomes impossible to effectively regulate the oil pressure, leading to jerks, jolts, and slippage. Transmission overheating: The issue of transmission overheating should not be overlooked. High temperatures can degrade the quality and friction characteristics of the automatic transmission fluid, increasing friction and wear. This results in transmission noise, and sludge (impurities or dirt) can also form inside the transmission (e.g., in the valve body), causing the transmission to jerk or jolt.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.