How to Control Speed When Driving on Muddy Roads?

2 Answers
DelMiranda
07/28/25 7:54pm
When driving on muddy roads: Use medium to low gear, hold the steering wheel steadily, maintain a constant speed by stabilizing the accelerator pedal, and try to pass through in one go without using the service brake to prevent the vehicle from sliding. Below are some precautions for driving on muddy roads: 1. Be cautious when going downhill: Always select medium to low gear when descending, reduce the throttle, and descend slowly. Never coast downhill in neutral. Braking is often required during descent to avoid obstacles, especially on dirt roads with sharp turns. Coasting in neutral while braking can easily cause the vehicle to deviate, skid sideways, or even roll over, leading to serious accidents. 2. Pay attention to safe overtaking: Avoid following the vehicle in front too closely to prevent dust (on sunny days) or mud splashes (on rainy days) from obstructing your view. When encountering oncoming traffic, observe the road surface carefully, especially during prolonged rain, and avoid getting too close to the shoulder to prevent side-slip accidents.
Was this review help?
20
5
Share
CarlosFitz
08/12/25 12:44am
When driving on muddy roads, I always slow down for safety. The slippery surface offers weak traction, and driving fast can easily lead to skidding or loss of control. Therefore, start gently and steadily, avoiding sudden acceleration that could cause wheel spin. Maintain a steady speed of 20 to 30 kilometers per hour while driving, avoiding sudden acceleration or braking. Reduce speed before turning to minimize the risk of skidding. If the car starts to drift, stay calm and avoid slamming the brakes—ease off the accelerator or use a lower gear to stabilize. It's advisable to follow the tracks of the vehicle ahead and avoid deep mud or potholes. Proper speed control significantly reduces the risk of accidents, ensuring safety for yourself and others. Additionally, check your tire condition to ensure sufficient tread depth for grip. In short, the golden rule for driving on muddy roads is to go slow and stay alert.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

How many days is the validity period of a temporary traffic permit generally?

Temporary license plates are valid for a maximum of 30 days. Here is the relevant information: 1. According to Article 8 of the Road Traffic Safety Law of the People's Republic of China: The state implements a registration system for motor vehicles. Motor vehicles can only be driven on the road after being registered by the traffic management department of the public security organ. For motor vehicles that have not yet been registered but need to be temporarily driven on the road, a temporary traffic permit must be obtained. 2. Extended information: New cars using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for the use of official license plates. After expiration, they may face penalties such as vehicle impoundment, fines, and 12-point deductions.
4
1
Share

How to Turn on the Air Conditioning in FAW-Volkswagen Bora?

To turn on the air conditioning in the FAW-Volkswagen Bora, simply press the AC button. The FAW-Volkswagen Bora is a compact car. Taking the 2021 Volkswagen Bora as an example, it is a 4-door, 5-seater compact car with the following dimensions: length 4663 mm, width 1815 mm, height 1462 mm, wheelbase 2688 mm, fuel tank capacity 50 liters, trunk capacity 506 liters, and curb weight 1320 kg. The 2021 Volkswagen Bora is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power of 85 kW, paired with a 7-speed dual-clutch transmission.
7
0
Share

What are the differences between the URV and the GuanDao?

The differences between the URV and the GuanDao are: 1. Different manufacturers: the URV belongs to Dongfeng Honda; the GuanDao belongs to GAC Honda. 2. Different body dimensions: the URV's body length, width, and height are 4825mm, 1942mm, and 1670mm respectively; the GuanDao's body length, width, and height are 4816mm, 1942mm, and 1669mm respectively. 3. Different tail light shapes: the URV has a full-width tail light; the GuanDao has split tail lights. Both the URV and the GuanDao are equipped with a 1.5L turbocharged engine, with a maximum horsepower of 193PS, a maximum power of 142kW, a maximum torque of 243Nm, and are matched with a continuously variable transmission.
3
2
Share

What Are the Hazards of Flood-Damaged Cars to the Engine?

The impact on the engine includes deformation of the engine connecting rod, leading to shortened piston strokes and insufficient compression of gases. Below is relevant information: 1. Flood-Damaged Cars: These are vehicles that have been submerged in water, typically referring to those where the engine and transmission have been soaked, with water levels exceeding the wheels and seats, and the underbody components being in prolonged contact with water. Such vehicles pose significant risks, as their electrical systems are prone to short circuits and fires. 2. Classification: Water levels above the chassis indicate immersion; levels above the oil dipstick indicate partial submersion; levels above the hood and dashboard indicate complete submersion.
9
1
Share

What is the fuel consumption per 100 kilometers of the Geely Icon?

Geely ICON's fuel consumption per 100 kilometers is 4.3L. Here are the specific details of the Geely ICON: 1. In terms of exterior design, the Geely ICON has a rugged appearance, resembling a hardcore off-road vehicle, with high comfort. 2. For the interior, it features an antibacterial steering wheel and an air filter with CN95 effect. 3. In terms of power, the Geely ICON has four models in the 260T and 300T versions. The 300T version's engine is equipped with a 48V mild hybrid system, providing an additional 10kw of power. During vehicle start-up and low-speed driving, the 48V motor supplies the power output. The minimum fuel consumption is only 4.3L per 100 kilometers.
15
0
Share

What Causes the Loss of Power Steering After a Car Goes Through Water?

After driving through water, the steering wheel becomes heavier. The reasons are as follows: 1. Drive belt gets wet: When a car goes through water, its components may inevitably get wet. In this case, the hydraulic power steering pump's drive belt may slip due to contact with water, reducing steering assistance and making the steering wheel heavier. 2. Water entering the electric power steering components after driving through water may cause circuit malfunctions. 3. Water entering the steering gear during water driving may lead to internal mechanical failure. 4. Moisture in the steering gear wiring harness connector may cause temporary short circuits. 5. Water entering the suspension bushings increases steering resistance. 6. Water mixing with the power steering fluid reduces its functionality, increasing steering resistance.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.